A: I used a compound miter saw with a 60 tooth bit and cut it perfectly. I also highly recommend using a two part adhesive glue to create perfect corners. My family and friends cannot believe the finished crown is not real wood.
A: Debbie, As the community answer stated a compound miter saw is ideal. Best regards, NMC
A: Hello, The spring angle for this product is 45 degrees. Best regards, NMC North America
A: Hi! I am so sorry for my delayed response. The portal was just upgraded to begin notifying us when questions are asked. This profile has an 'actual' measurement of 8-3/4 inches in height. However, when installed at the proper angle, it will measure 5-7/8 inches in height (and 5-7/8 inches in depth as well). You can see a clear drawing of 'actual' vs. installed measurements at: https://www.queenofcrown.com/the-crown/
A: About 6 inches
A: The seams are easily hidden. If you are leaving the molding white, I would recommend using the acrylic/latex caulk that dries white. It will be used to install the molding, and it can also be used at the seams. This one is great: http://www.homedepot.com/p/DAP-11-2-oz-Alex-Fast-Dry-Acrylic-Latex-Caulk-Plus-Silicone-18428/202734234. You can caulk the seams (put a little more than you need), and then use your finger to smooth out the glue to the profile of the molding. Excess can be wiped away with a wet paper towel. The material of our moldings is fully waterproof, so the joints will not gap over time with changes in humidity or temperature.
A: Seams are not easily hidden. Go with the longest length you can find.
|Brand||Nomastyl||Woodgrain Millwork||HOUSE OF FARA||Royal Mouldings|
|Name||1-1/2 in. x 8-3/4 in. x 78-3/4 in. Polystyrene Crown Moulding||WM 45 9/16 in. x 5-1/4 in. x 96 in. Primed Finger-Jointed Crown Moulding||8841 3/4 in. x 5-1/4 in. x 96 in. MDF Crown Moulding||7158 1-13/32 in. x 2 in. PVC Rams Crown White Moulding|
|Material||Foam||Wood||Medium Density Fiberboard (MDF)||Vinyl|
|Moulding Type||Crown Moulding||Crown Moulding||Crown Moulding||Crown Moulding|
|Sell Pack Options||Single Item||Single Item||Single Item||Single Item|
|Moulding Features||Moisture Resistant,Rot Resistant,Termite Resistant||No Additional Features||No Additional Features||Moisture Resistant,Rot Resistant,Termite Resistant|
|THD SO SKU||1000373080|
|View Product||View Product||View Product||View Product|