$397
- Pipe hanger built to hold DWV pipes in place
- Enables the expansion and contraction of multiple pipes
- Diagonal nail holes let you fit the hanger in small areas
- View More Details
How to Get It
Product Overview
Supply & Pressure
Clamps, brackets, and hooks can be used to complete DWV, potable water, and heating pipe installations.
Guards & Plates
Stud guards and FHA safety plates provide protection for pipes and wiring installations.
Drain Waste & Vent
J-hooks, hanger straps, and duct ties can be used to secure and support piping below the wall, ceiling or floor.
Easy to Install
Easy to install and require minimal tools for assembly.
Variety of Materials & Sizes
Accommodates various different pipe sizes and materials.
Support
Ensures secure support to the wall, ceiling, or floor.
Protection
Helps to protect piping system once installed.
Hangers
Pipe hangers can be used to secure supply lines and DWV pipes.
Clamps
Pipe clamps with nails allow for a quick and easy installation for copper tube piping.
Hooks
DWV j-hooks provide a fast, easy, and economical way to secure drain piping.
Straps
Metal hanger straps offer a quick and inexpensive way to hang pipes from joists and rafters.
Studs & Safety Plates
Stud guards and FHA safety plates provide protection for pipes and wiring installations.
Brackets
Brackets help to position the copper water distribution pipes for sinks, lavatories, and other fixtures.
Oatey offers a complete range of pipe support products for all of your application needs. Whether it's securing supply lines, DWV pipe or supporting your work with brackets and bars, you can count on us for quality, performance and innovation. Built for quality and ease of use.
- Plastic coated galvanized material
- Fits 2 in. pipes
- Compatible with multiple pipe materials
- 1-pack
- Versatile design makes it easy to work with
- Rigorously tested and proven to last in many conditions
- California residents
Specifications
Dimensions
| Maximum compatible pipe size (in.) | 2.00 | Pipe/rod size (in.) | 2 |
|---|---|---|---|
| Product Depth (in.) | 1 | Product Height (in.) | 1 |
| Product Width (in.) | 1 |
Details
| Compatible Pipe Material | Multi-Purpose | Compatible Threaded Rod Size (in.) | 0 |
|---|---|---|---|
| Corrosion Resistant | No | Finish Family | Stainless Steel |
| Hardware Required | No | Maintenance, Repair & Supplies Product Type | Pipe Hangers & Supports |
| Material | Plastic | Minimum compatible pipe size (in.) | 0 |
| Number in Package | 1 | Pack Size | 1 |
| Pipe Hangers & Supports Type | DWV Hangers | Product Weight (lb.) | 0.28 |
| Returnable | 90-Day |
Warranty / Certifications
| Manufacturer Warranty | 1 year limited |
|---|
Questions & Answers
Typical questions asked about products:
- Is the product durable?
- Is the product easy to use?
- What are the dimensions of the product?
Customer Reviews
Sep 1, 2018
I had hired a plumber a while back to plumb up two new bathrooms in an addition that we had put o...
I had hired a plumber a while back to plumb up two new bathrooms in an addition that we had put on our house. He had to tie in the new plumbing to the old plumbing. He decided not to come back to finish the job after a while, so I took it upon myself to finish the job. The section of 3" pipe that joined the 4" pipe was hanging down a bit, so I felt that this spot could use a hanger. This hanger did the trick.
by
Aug 29, 2018
I received my 3 inch plastic coat galvanized pipe clamp today, this is a well made heavy duty pip...
I received my 3 inch plastic coat galvanized pipe clamp today, this is a well made heavy duty pipe hanger. It's approximately 17 inches long with nine adjustment holes to make it fit with most applications. I don't work with 3 inch pipe but I will use this for other projects. I like the fact it can be bent to fit tight areas. This is a useful clamp to have in stock when working in attics etc.,
by
Aug 28, 2018
The 3" plastic coated galvanized DWV hanger is a versatile hanger that I used to hold a 3" PVC pi...
The 3" plastic coated galvanized DWV hanger is a versatile hanger that I used to hold a 3" PVC pipe to the side of my seawall as a bumper to protect my boat. The metal hanger holds the pipe better than plastic strap and being plastic coated it is protected from corrosion of salt water around the pipe. I screwed it into the concrete with Tapcon hex head screws that can be removed or replaced because a hole is drilled first. I concreted over the part that was attached to the concrete seawall.
by
Apr 13, 2022
by
Mar 18, 2021
Needed a 1" hanger but this one did the job. Slipped foam insulation over the 1"pipe, then attac...
Needed a 1" hanger but this one did the job. Slipped foam insulation over the 1"pipe, then attached the hanger and it fit perfectly. No more pipe hanger banging noise when the heat comes on!
by
May 29, 2019
4 Star Review
Rating provided by a verified purchaser
by
Dec 27, 2018
Worked as expected for supporting PCV pipe for a radon exhaust fan.
Worked as expected for supporting PCV pipe for a radon exhaust fan.
by
Sep 11, 2018
I'm not a fair test because although I bought these items, I have yet to install them.
I'm not a fair test because although I bought these items, I have yet to install them.
by
Sep 7, 2018
Oatey offers a complete range of pipe support products for all of your application needs. Whether it's securing supply lines, DWV pipe or supporting your work with brackets and bars, you can count on us for quality, performance and innovation. Built for quality and ease of use.
Plastic coated galvanized material
Fits 3 in. pipes
Compatible with multiple pipe materials
1-pack
Versatile design makes it easy to work with
Rigorously tested and proven to last in many conditions
by
Sep 6, 2018
I replaced my metal rusted 3" hanger with this new plastic 3" coat galvanized DWV Hanger that won...
I replaced my metal rusted 3" hanger with this new plastic 3" coat galvanized DWV Hanger that won't rust and wear out. This 3" hanger was super easy to install and I used a pair of pliers to tighten the hanger. I put a screw in one of the holes on the metal end of the hanger and attached to a supporting wood brace. This hanger is just giving extra support to a water pipe. This hanger is well made and can be used on many different projects.
by
Explore More on homedepot.com
Hardware
Home Décor
Plumbing
