Internet #202400931

Model # 30165

0400999801402

Oz-Post

6 in. x 6 in. Post Anchor T6-700 Project Pack (Case of 4)

$ 110 48 /case

Overview

Oz-Post model T6-700 is for use in conjunction the Oz-Deck plate for load bearing applications. This model should ONLY be used with the OD-T4 deck plate. For fencing, sign posts and other projects please use the T6-850 post anchor.The Oz-Deck OD-T4 is an accessory for the T4-850 and T6-700 Oz-Post to provide load bearing capacity required for deck construction. Oz-Deck provides the same strength and stability of conventional construction techniques with less labor and lower cost. Installation is easy; simply locate the Oz-Deck plates where your posts are required and drive the Oz-Post through them. The jackhammer installation method makes installation fast and also compacts the soil beneath the Oz-Deck to prevent the Oz-Deck from settling over time. The revolutionary design of Oz-Deck allows them to be utilized in soft terrain and also in regions that are subjected to freeze thaw conditions. Oz-Deck meets ICC (International Code Council) IRC-2006 (International Residential Code For One- And Two-Family Dwellings 2006) 2006 IRC, R403.1.4.1 exception 3 and have been independently tested with loads exceeding 6500 lbs.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

+
+

Product Overview

Oz-Post model T6-700 is for use in conjunction the Oz-Deck plate for load bearing applications. This model should ONLY be used with the OD-T4 deck plate. For fencing, sign posts and other projects please use the T6-850 post anchor.The Oz-Deck OD-T4 is an accessory for the T4-850 and T6-700 Oz-Post to provide load bearing capacity required for deck construction. Oz-Deck provides the same strength and stability of conventional construction techniques with less labor and lower cost. Installation is easy; simply locate the Oz-Deck plates where your posts are required and drive the Oz-Post through them. The jackhammer installation method makes installation fast and also compacts the soil beneath the Oz-Deck to prevent the Oz-Deck from settling over time. The revolutionary design of Oz-Deck allows them to be utilized in soft terrain and also in regions that are subjected to freeze thaw conditions. Oz-Deck meets ICC (International Code Council) IRC-2006 (International Residential Code For One- And Two-Family Dwellings 2006) 2006 IRC, R403.1.4.1 exception 3 and have been independently tested with loads exceeding 6500 lbs.
  • Fits a true 5-1/2 in. x 5-1/2 in. square post (pressure treated)
  • 4-Pieces per box
  • Hot dipped galvanized anchor
  • Suitable for contact with acq approved lumber
  • Learn more about concrete anchors here.

Product Overview

Model #: 30165
Internet #: 202400931

Oz-Post model T6-700 is for use in conjunction the Oz-Deck plate for load bearing applications. This model should ONLY be used with the OD-T4 deck plate. For fencing, sign posts and other projects please use the T6-850 post anchor.The Oz-Deck OD-T4 is an accessory for the T4-850 and T6-700 Oz-Post to provide load bearing capacity required for deck construction. Oz-Deck provides the same strength and stability of conventional construction techniques with less labor and lower cost. Installation is easy; simply locate the Oz-Deck plates where your posts are required and drive the Oz-Post through them. The jackhammer installation method makes installation fast and also compacts the soil beneath the Oz-Deck to prevent the Oz-Deck from settling over time. The revolutionary design of Oz-Deck allows them to be utilized in soft terrain and also in regions that are subjected to freeze thaw conditions. Oz-Deck meets ICC (International Code Council) IRC-2006 (International Residential Code For One- And Two-Family Dwellings 2006) 2006 IRC, R403.1.4.1 exception 3 and have been independently tested with loads exceeding 6500 lbs.

  • Fits a true 5-1/2 in. x 5-1/2 in. square post (pressure treated)
  • 4-Pieces per box
  • Hot dipped galvanized anchor
  • Suitable for contact with acq approved lumber
  • Learn more about concrete anchors here.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
5.5
Product Height (in.)
36
Product Width (in.)
5.5

Details

Returnable
90-Day

Specifications

Dimensions

Product Depth (in.)
5.5
Product Height (in.)
36
Product Width (in.)
5.5

Details

Returnable
90-Day

Questions & Answers

Can this product be used where underground slate is present?

Asked by: ARQT
probably not once you hit a rock it comes to a stop or pushes off to one side and becomes unlevel
Answered by: Smoke
Date published: 2018-01-17

Would this be good for a mailbox?

Asked by: Scottscott
yes very good for mailbox
Answered by: Smoke
Date published: 2018-01-17

can these be used for a pergola

I would like to use these as anchors for 6x6, I will set them in concrete in the rocky texas soil, how would I secure the 6x6 to the anchor. are holes big enough for carriage bolts?
Asked by: Toney
Yes, these can be used for a pergola.
Answered by: CommunityAnswer
Date published: 2019-04-11

Can you use this for a raised foundation

Asked by: Phillips
That will be up to your local building department to decide, if you do make sure you use the plates that can be purchase for extra load
Answered by: Smoke
Date published: 2018-01-17
  • y_2019, m_6, d_26, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_202400931, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT

Customer Reviews

6 in. x 6 in. Post Anchor T6-700 Project Pack (Case of 4) is rated 4.4 out of 5 by 12.
Rated 5 out of 5 by from Excellent product. Have bought before and would gladly purchase again... Excellent product. Have bought before and would gladly purchase again for next deck project.
Date published: 2019-05-21
Rated 4 out of 5 by from not too shabby Just installed these this past weekend. Luckily my ground is considerably medium to soft. I just used an 8 lb sledge hammer and knocked them all in, was pretty easy. I just couldn't see myself digging post holes. If i had to put a time on the 6 i drove in, probably 45 min tops.You just need to make sure there aren't any rocks or mini boulders. 1 apparently hit rock and went in a different direction. Pulled it out with relatively ease, tired again and same thing. I said screw it I'll leave it since no one would be able to see it. Overall I am happy with the purchase.
Date published: 2014-07-01
Rated 2 out of 5 by from Forget about using these in New England If you've got rocky soil like the glacial till we've got all around here forget about using these. The post base hits a rock almost immediately, and if you can get it to continue past that point (a big if), it starts twisting and repositioning itself completely out of square/the correct location. Like so many other products involving digging holes etc, (e.g., power augers ... REAL dangerous to use in these parts!) I suppose it works great for those folks out in the loamy farmlands in the midwest.
Date published: 2014-08-15
Rated 5 out of 5 by from Overall product was great. I predrilled holes with a 1.5”... Overall product was great. I predrilled holes with a 1.5” x18” long SDS (hammer drill) bit. I used a lump hammer and scrap 6x6 PT lumber to drive it in. A little harder than expected but worked out in the end.
Date published: 2018-10-16
Rated 5 out of 5 by from They are easier if no rocks are in they way.... They are easier if no rocks are in they way.
Date published: 2018-08-07
Rated 5 out of 5 by from Good to find this product as it is difficult to find this size and it works excellent Good to find this product as it is difficult to find this size and it works excellent
Date published: 2018-04-05
Rated 4 out of 5 by from Made for treated lumber. not actual 6x6. had to slice... Made for treated lumber. not actual 6x6. had to slice two sides to fit cedar post in them. Hammered them in, next time I'll rent a jack hammer.
Date published: 2018-03-13
Rated 5 out of 5 by from Worked well. I used a jackhammer to install into the... Worked well. I used a jackhammer to install into the OZ plates. Solid support for my posts without messing with concrete footers.
Date published: 2018-01-16
  • y_2019, m_6, d_26, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_202400931, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 82ms
  • REVIEWS, PRODUCT