23.23 in. L x 11.1 in. W Adobe Drift Waterproof Adhesive No Grout Vinyl Wall Tile (17.9 sq. ft./case)

A:  Thank you for your inquiry with The Home Depot. Since the Palisade Tile is recomended for showers and 100 % waterproof it could be used on a bathroom countertop . We have the backsplash in grecian earth 94 inch vinyl backsplash accessory trim kit ( internet# 317148980). We also have 47 x 7.2 Gray Oak Waterproof Adhesive No Grout Vinyl Wall Tile (Internet number 317236648) As always, We appreciate your business and look foward to serving you in the future.

A:  Thank you for your interest in our Palisade tiles! We do not recommend using our tiles on a working surface, such as a floor or countertop, as the tiles are not manufactured with a strong enough wear layer for that type of application. However, the tiles can be used for any wall applications, such as shower or backsplash installations. If you have any additional questions please feel free to reach out to us at 800.434.3750. Thank you!

A:  Thank you for your interest in our Palisade tiles! The panels can be glued to smooth surfaces such as plaster, plasterboard or even to existing tiles. Other substrates in a dry environment that will work are drywall, plywood and OSB. In a wet environment, such as a tub or shower area, existing ceramic tile walls can be covered with no additional preparation required. Otherwise, installation over a waterproof substrate is required, such as Cement Board®, Schluter Kerdi Board®, GP Densheild®, Johns Manville Go Board®, Hardiebacker®, WPBK Triton®, Fiberock® and equivalent products. Always follow manufacturer’s installation instructions to create a waterproof enclosure. If you have any additional questions please feel free to reach out to us at 800.434.3750. Thank you!

A:  No, the FRP will have to be removed, the surface is too course to accept the tiles. They will not adhere properly. Mike

A:  Thank you for your interest in our Palisade tiles! Please feel free to refer to our "Last tile in a row" installation guide with step-by-step instructions on how to install your final tile. If you have any additional questions please feel free to reach out to us at 800.434.3750. Thank you!

A:  Thank you for your great question! Our Palisade panels can be glued to smooth surfaces such as plaster, plasterboard or even to existing tiles. Other substrates in a dry environment that will work are drywall, plywood and OSB. In a wet environment, such as a tub or shower area, existing ceramic tile walls can be covered with no additional preparation required. Otherwise, installation over a waterproof substrate is required, such as Cement Board®, Schluter Kerdi Board®, GP Densheild®, Johns Manville Go Board®, Hardiebacker®, WPBK Triton®, Fiberock® and equivalent products. Always follow manufacturer’s installation instructions to create a waterproof enclosure. If you have additional questions, feel free to contact us at 800.434.3750. Thank you!