#1 Home Improvement Retailer

Internet #309637325

Model #71189

3/8 in.-16 Furniture Levelers with Threaded Inserts, White (4-Pack)

Frequently Bought Together

+
+
Price:

Product Overview

The POWERTEC 71189 Insert Levelers (4-Pack) are ideal for lifting and leveling even your heaviest furniture, easily and quickly. With its 3/8 in.-16 thread size, there is a good chance that the shaft of these levels will also fit the existing inserts in older furniture (if they have the corresponding internal measurements). These well-made, attractive levelers adjust from a minimum height of 3/4 in. to a maximum height of 1-3/8 in. or more. Their rugged durability allows for a weight capacity of up to 550 lbs. per leveler or 2200 lbs. per set of 4. The body of the leveler is precision machined of rugged carbon steel, the threaded (tapered) inserts are constructed of zinc for rust-resistant. Footpads feature a PA nylon construction for durability and glide-ability. In addition, PA nylon will not mar your floor surfaces. Attractive chrome plating on the footpads provide a polished look to your furniture. For quick and easy setup, simply pre-drill installation holes into the furniture at preferred site of attachment. The threaded inserts assemble with a 10 mm hex wrench. A 1/2 in. hole is a convenient place to start, but depending on your wood type, larger holes may be required. Once attached, adjust to the desired height with a 13 mm hex wrench (not included). High quality, easy-on-the-eye and adjustable.
  • Ideal for lifting/leveling/stabilizing your heavier furniture
  • Level body constructed of rugged carbon steel, threaded insert is made of zinc for rust/wear resistance, non-marring footpads feature PA nylon construction for easy glide-ability and durability, chrome plating on the foot pad provides an attractive, polished look
  • Easy to use via integrated adjusting nut built into the shaft itself, tighten with 13 mm wrench (not included)
  • Bolt body dimension: 3/8 in.-16 x 2, pad diameter 1-3/8 in., tapered threaded insert is a nominal 1 in. H, can be used in a wide variety of older furniture as replacement legs (if they have corresponding internal measurements)
  • 4-pack, weight capacity: 550 lbs. per caster, 2200 lbs. for set of 4



  • California residents

Specifications

Dimensions

Product Height (in.)
1 in

Details

Color
White
Color/Finish
White
Compatible Furniture Type
Sofa,Table
Leg Diameter (in.)
3/8
Material
Metal
Number of Pieces
4
Returnable
90-Day

Questions & Answers

6Questions9Answers

I need to know what part is called so I can order them

Asked by mike March 12, 2021
1
Answer

I think that I searched for furniture levelors.

how do i install them

Asked by rob March 6, 2021
1
Answer

Easy Setup: For quick and easy setup, simply pre-drill installation holes into the furniture at preferred site of attachment. To avoid damaging your threaded inserts, you should start with a large hole and work your way down to the best fit.

Can these be used for outdoor furniture? Do the sliders swivel?

Asked by Andy October 25, 2020
2
Answers

I'm sure you could use them outdoors, but I don't know if there would be a rust issue or not. The sliders don't swivel. They are fixed to the end of the screw.

Can you screw these into end grain? Are they waterproof?

Asked by VERONICA June 22, 2020
2
Answers

I screwed them into the end grain of Douglas fir, which is quite soft. If used with a hardwood, they would be quite substantial.

what is the weight capacity of these leveler?

Asked by Mike April 19, 2020
1
Answer

It has a weight capacity of 550 lbs. per caster, 2200 lbs. for the set of 4.

It is a little hard to understand the dimensions in the description. Can you include a diagram w...

Asked by Mark November 11, 2019
2
Answers

it appears the adjustable foot threads into an insert with a 3/8-16 thread, the insert threads into a hole approximately 1/2" in diameter drilled into a wooden foot!

Customer Reviews

  • 4.6
    out of 15 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 15 reviews
Just what I needed to keep a large bench stable...
Just what I needed to keep a large bench stable and level - installation was relatively easy, so far no issues with the nylon feet on the wood floor if I need to scoot the bench around a bit.
by hd
Very useful item. Installed as planned. I drilled a 0.469...
Very useful item. Installed as planned. I drilled a 0.469 inch diameter hole into pine wood.
by DENNIS
They did not fit my vanity so I have no...
They did not fit my vanity so I have no way to assess their usefulness. Thank you
by MARCIA
These are perfect for leveling furniture like kitchen tables....
These are perfect for leveling furniture like kitchen tables.
by BB3
1 person found this helpful
They were returned....They were to big for what I needed them for....
They were returned....They were to big for what I needed them for....
by none
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
I was building a work tablefor my shop and needed to be able to level it up with other equipment,...
I was building a work tablefor my shop and needed to be able to level it up with other equipment, so I needed adjustable feet for that purpose. These worked perfectly and allowed me to adjust the height of the table top to match various pieces of equipment of varying heights with very little trouble. They are sturdy and well made to withstand heavy use.
by Canerunner
Like Tony says, "they're grrreat!"...
Like Tony says, "they're grrreat!"
by Good
by LP
They worked great in leveling my work table that I...
They worked great in leveling my work table that I built.
by JAMES
Showing 1-10 of 15 reviews