PPG METALLIC TONES 1 qt.#MTL113 Abundant Blue Metallic Interior Specialty Finish Paint-MTL113-04

Brings a Touch of Luxury to Walls, Trim and Accents

Sleek, luminous finish lends a shimmering richness to compliment architectural features

Provides a Beautiful Hammered Metal Finish

Metallic Tones adds a truly unique aesthetic

Paint Color Fan Deck All Metallic Paints

Available in 42 Curated Colors

Choose from a variety of unique metallic paint colors

Great for Interior Accent Walls

Adds shimmering color for a memorable statement

Make Your Trim Standout

Luminous paint color will add contrast for eye-catching features

Prime with a similar base color for best results

Use 2 coats to achieve a desirable metallic paint finish

Satin Slate Gray Metallic Paint Color In Kitchen

Satin Sheen

The satin sheen of PPG Metallic Tones provides a tasteful, luxurious look

Surface Prep

Surface must be dry and clean. Decorative brush or roller is recommended.

Dry Time

Normally dries to touch in 30 minutes at 77°F and 50% relative humidity.

Recoat

Ready to recoat in 2 to 4 hours.

Coverage

Covers 200 sq ft with one gallon. 2 coats are needed for a Metallic finish.

Clean Up

Clean tools with warm, soapy water.

Disposal

Contact your local environmental agency for guidance on disposal of unused paint.

If you don’t prime the walls does the old color show through?

Asked by: Mar

It may depend on the color your walls were previously. My walls were a light gray to start and i could not see any gray after the first coat was applied . It covers rather well . Needs two coats so you can get the finishing effect. The picture I have attached is how it looked after just the first coat .

Answered by: Kate73

Date published: 2020-08-14

Internet #301858995

Model # MTL113-04