1.60 cu. ft. White Compact Top Load Washer with Stainless Steel Tub

If you'd like to get a rack/shelf for cloth dryer, recommend you to search on Homedepot.com.

Yes

Yes. this machine has 2 inlet hoses, you can directly hook up to the regular water supply as the regular washing machine. It also comes with a Standard Size faucet adapter which helps you to directly connect to the standard size faucet.

I leave the tap on until the whole cycle that I'm washing on is done and then I turn the tap off. Good Luck STAY SAFE & STAY WELL

It attaches to the Bottom. Not sure why we thought it was pretty useless but still put it on. You have to tilt the washer on its side to put it on.

This machine comes with 2 water inlet hose which can be directly hook up to the water supply like the regular washer. It also comes with a Standard size faucet adapter, which helps to connect to the standard size faucet. The quick adapter has both internal thread (diameter ≈ 13/16") and external thread (diameter ≈ 7/8") that can fit for standar faucets in US. If your faucet is not the standard size, recommend you to get an additional aerator adapter convertor, it helps to resize it. You can search the aerator adapter convertor online, or recommend you to check with the local Homedepot, the experts can provide you some suggestions with the solution.

There always are excessive lint on clothes after washing no matter which kind of washing machine you are using. Recommend you to clean the lint filter after every load. And you can also apply a floating lint trap which helps to better collect the lint.

The black square bottom piece is for transportation usage only. This gives the purpose to protect and stablize the motor during the transportation. It needs to be removed after unpack the package. This piece can not be applied when using the machine, otherwise, it will ruin the motor and cause the machine malfunction.

The manufacture only supply one size for drain hose. There is no extension. But you can buy a extension hose at local store, and apply with the waterproof glue to connect the join part.

The machine has 2 water intake outlets on the back top of the machine, you can contact 2 water inlet hoses to hook up with the regular water source like the regular washer, at this moment, you can choose either "Hot", "Warm" or "Cold"; however, if if want to hook up to the kitchen faucet, you will have to use 1 water inlet hose only and ONLY connect the "Cold" water intake outlet on the machine, and it is important to choose the "Cold" water temperature function from the control panel. The machine only recognize and intake the water from the water intake outlet you have connect with by the corresponding tempreture you have picked. It means choosing the "cold" water temperature function on the control panel will send the order to the machine, then the machine will turn on the valve of the "Cold" water intake outlet for intaking water. Gentle reminder, the silver quick adapter is the standard size, which helps to hook up to the standard size faucet in North America. It has both internal thread (diameter ≈ 13/16") and external thread (diameter ≈ 7/8"). As a friendly reminder, the nozzle / aerator on the faucet needs to be removed first before screwing the quick adapter onto the faucet. Therefore, the size of the nozzle should be the same as the quick adapter. When using internal threads, one of the rubber washers needs to be removed from the quick adapter.