PowerMaster Pro 30-Degree Pneumatic Framing Nailer

Hi Joe. We do have two kits available for the PowerMaster Pro. You can go online to find them. 219235 is the repair kit which has just the seals. 219426 is the premium rebuild kit, which has the seals plus the main valve assembly in the cap, if that is needed. Please also feel free to call us at (800) 222-6990 or email us at tech@paslode.com for further information.

Hello Kieth, I just checked the Paslode website and found no cases whatsoever for any of their pneumatic tools. So it appears that they do NOT make ( or provide) a case for these. I use an old Bosch case for mine. Although it was not a perfect fit, after cutting away some of the interior plastic and adding some foam padding in places, it fits just fine. I thought about making a case from scrap plywood, which should be relatively quick and easy. But even a large bag can provide enough protection assuming we don't throw our tools around and protect the vulnerable areas: tip, rails, and air-connector. For the tip and rails, I just use folded pieces of cardboard with rubber bands to hold these crude protectors in place. For the air connector, I use a commercial insert which is available inexpensively at any Freight place near a Harbor, if you catch my drift. Another easy trick is to SAVE the cardboard box the nailer arrives in and reinforce that with tape to use as a case. I've seen guys do that for this and other tools, and it works quite well. Of course, they occasionally need to repair these cardboard boxes with more tape. Unfortunately, I did not think to save the box for mine! If you order one, and a case is important for your work, that trick may save you some time and expense. So for now, I just keep the nailer plus oil in that old plastic case. Pro tip: keep the oil in a plastic baggie to prevent messy spills. Sorry there was no OEM case available, but I hope this info provides you with useful alternatives. ;-) ~G

Hi, I am Sam from Paslode. Yes, the Paslode PowerMaster Pro 30-Degree Pneumatic Framing Nailer can drive 30° Paslode® RounDrive® Offset Full Head or Clipped Head nails.

Hi Scott, Thank you for your interest! This tools is assembled in the USA.

Yes! It handles both sizes nicely.

Hi Gunit, Yes, this tool shoots 3.5" x .135 nails at 34 degrees.

The oil is added through the compressor. Don't know if oil can be added manually.

Yes

The PowerMaster Pro can fire any 30° Paper Tape Framing Nails, either clipped or full round head.

Yes you just have to turn your regulator down to the recommended pressure