Internet #300489233

Model #515000

PowerMaster Pro 30-Degree Pneumatic Framing Nailer

  • Durable construction designed for reliable performance
  • Lightweight nailer at 7.9 lbs. for reduced fatigue
  • Convenient rear-loading magazine
  • See More Details

Frequently Bought Together


Product Overview

The Paslode PowerMaster Pro is the durable nailer that gets the job done, framing full walls faster with heavy-duty power. Weighing 7.9 lbs. the PowerMaster Pro is a lightweight nailer that means less fatigue and more control on your jobsite. Its convenient rear loading magazine saves you time by allowing you to load nails quicker and easier. This low-recoil nailer offers a center of gravity close to the trigger for great balance and less arm fatigue. When used with Paslode framing nails, this nailing systems heavy-duty power can help you frame walls faster to bring jobs in on time, every time.
  • Solid extrusion magazine is wear and impact resistant
  • Thumbwheel depth of drive provides fast and tool-free adjustments
  • Aggressive flared barbs for precise toe-nailing
  • Dry-fire lockout for assured fastener placement
  • Inline magazine improves balance and control for less fatigue
  • Soft grip handle for added comfort and control
  • 1/4 in. air fitting included so it's ready out of the box
  • Adjustable exhaust for comfortable operation
  • Use with Paslode 30° paper tape framing nails 2 in. L to 3-1/4 in. L
  • By-pass follower provides quick 2-step strip nail reloads
  • Rafter hook moves out of the way when not in use
  • 5-year limited warranty
  • Check out our helpful buying guide to learn more about nailers.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Framing Nailers

21-Degree 3-1/2 in. Full Round Framing Nailer
current product
PowerMaster Pro 30-Degree Pneumatic Framing Nailer
20-Volt MAX XR Lithium-Ion Cordless Brushless 2-Speed 21° Plastic Collated Framing Nailer with 4Ah Battery and ChargerPneumatic 21° Collated Framing Nailer with Bonus Pneumatic 15° Coil Roofing Nailer
Name21-Degree 3-1/2 in. Full Round Framing NailerPowerMaster Pro 30-Degree Pneumatic Framing Nailer20-Volt MAX XR Lithium-Ion Cordless Brushless 2-Speed 21° Plastic Collated Framing Nailer with 4Ah Battery and ChargerPneumatic 21° Collated Framing Nailer with Bonus Pneumatic 15° Coil Roofing Nailer
Power TypeAirAirCordless ElectricAir
Nailgun Angle21302121
Maximum Fastener Size3-1/2 in3-1/4 in3-1/4 in3-1/4 in
Nail GaugeNA / OtherNA / OtherNA / OtherNA / Other
Cordless/ CordedCordedCordedCordlessCorded
Minimum Fastener Size2 in2 in2 in2 in
IncludedNo additional components or accessories are includedOilBag,Battery,Battery ChargerNo additional components or accessories are included
Compressor/Air Tool FeaturesFastener CollationAdjustable Exhaust Port,Fastener Collation,Fastener Depth Control Combo Kit,Fastener Collation,Fastener Depth Control
Motor Type Brushless
View ProductView ProductView ProductView Product



Product Depth (in.)
20.5 in
Product Height (in.)
13.5 in
Product Width (in.)
5.5 in


Air Tool Type
Air Nailer
Compressor/Air Tool Features
Adjustable Exhaust Port,Fastener Collation,Fastener Depth Control
Cordless/ Corded
Loading type
Maximum Fastener Size
3-1/4 in
Minimum Fastener Size
2 in
Minimum Recommended Air Delivery SCFM @ 90PSI
Minimum Recommended Operating Pressure (psi)
Nail Gauge
NA / Other
Nailgun Angle
Power Type
Tools Product Type
Air Tool

Questions & Answers


Can I get a rebuild kit for this gun?

Asked by JOE September 28, 2020

Hi Joe. We do have two kits available for the PowerMaster Pro. You can go online to find them. 219235 is the repair kit which has just the seals. 219426 is the premium rebuild kit, which has the seals plus the main valve assembly in the cap, if that is needed. Please also feel free to call us at (800) 222-6990 or email us at for further information.

Does Paslode make a case for this gun? Keith

Asked by Keith August 13, 2020

Hello Kieth, I just checked the Paslode website and found no cases whatsoever for any of their pneumatic tools. So it appears that they do NOT make ( or provide) a case for these. I use an old Bosch case for mine. Although it was not a perfect fit, after cutting away some of the interior plastic and adding some foam padding in places, it fits just fine. I thought about making a case from scrap plywood, which should be relatively quick and easy. But even a large bag can provide enough protection assuming we don't throw our tools around and protect the vulnerable areas: tip, rails, and air-connector. For the tip and rails, I just use folded pieces of cardboard with rubber bands to hold these crude protectors in place. For the air connector, I use a commercial insert which is available inexpensively at any Freight place near a Harbor, if you catch my drift. Another easy trick is to SAVE the cardboard box the nailer arrives in and reinforce that with tape to use as a case. I've seen guys do that for this and other tools, and it works quite well. Of course, they occasionally need to repair these cardboard boxes with more tape. Unfortunately, I did not think to save the box for mine! If you order one, and a case is important for your work, that trick may save you some time and expense. So for now, I just keep the nailer plus oil in that old plastic case. Pro tip: keep the oil in a plastic baggie to prevent messy spills. Sorry there was no OEM case available, but I hope this info provides you with useful alternatives. ;-) ~G

Is this a full head nailer?

Asked by Twenty June 22, 2020

Hi, I am Sam from Paslode. Yes, the Paslode PowerMaster Pro 30-Degree Pneumatic Framing Nailer can drive 30° Paslode® RounDrive® Offset Full Head or Clipped Head nails.

Made in USA?

Asked by Scott May 28, 2020

Hi Scott, Thank you for your interest! This tools is assembled in the USA.

Will this gun use both 8D and 16D?

Asked by Blackbeard May 5, 2020

Yes! It handles both sizes nicely.

Will it shoot 34 degree nails?

Asked by Gunit April 25, 2020

Hi Gunit, Yes, this tool shoots 3.5" x .135 nails at 34 degrees.

Is it safe to use paslode cordless lubercant in the pneumatic nailer

Asked by Bill February 23, 2019

The oil is added through the compressor. Don't know if oil can be added manually.

Will this work for framing and siding? 16 nails for framing and 8's for siding?

Asked by MB October 19, 2018


I have a Senco air framing nailer now, uses clipped nails. Will these nails work in this gun?

Asked by Brooklyn348 September 10, 2018

The PowerMaster Pro can fire any 30° Paper Tape Framing Nails, either clipped or full round head.

Can I use the gun with a 135 PSI compressor?

Asked by Carlos April 7, 2018

Yes you just have to turn your regulator down to the recommended pressure

PowerMaster Pro 30-Degree Pneumatic Framing Nailer - page 2

Customer Reviews

  • 4.9
    out of 64 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 64 reviews
Easy to operate light weight. Worked as described would purchase again.
Easy to operate light weight. Worked as described would purchase again.
by Ray
1 person found this helpful
Nimble, Balanced, smooth and strong!
MAN this thing ROCKS! I’ve used a ton of air nailers over the years. This is my new favorite. Why? It really is lightweight as the specs and reviews will tell you. But it’s not just the light weight that makes it so much easier to use. It is beautifully balanced. They place the handle near the center of gravity so I can even use it left handed with ease and control. (see photo!) The trigger is easy to operate even with gloves on. There are no sharp edges that cut or irritate if you prefer to work bare-handed as I do. Loading the magazine is a two second job and very easy because the release mechanism is smooth, precision made. Of course it won’t fire accidentally because of the safety tip which is also exactly right. It needs some pressure to operate, but is not excessively hard to press like other nailers I’ve used. That’s super helpful when bending over or reaching high. Of course the compact design and 30 degree angle helps it fit into tight spaces as you can see from the photo. That’s not 16 inches on center. That’s only a 10 inch space between studs! Yet I was able to easily hoist this nimble tool above my head, left-handed, and toe-nail those studs while the other hand held the phone. Power? In spades! You must give it enough air to work of course, but even with my little compressor it throws 16 penny spikes in one shot, perfect every time. I oiled it as you always should before each use, and had ZERO misfires during that entire day’s work. The only nail gun that might be more convenient is a cordless model, but since I do not do roofing anymore, I do not need that feature. I think air nailers have proven themselves reliable and they are certainly lighter in weight. That makes this my new “go-to” nailer for any new construction or remodeling job. I can also recommend the Paslode brand nails. Not a single one bent or jammed. They are consistently straight and drive home cleanly. Every one. Every time. That’s always worth it when you need to finish fast and right. Problems? Only one. Using this nailer is addictive. Now I’m eyeing our old back porch for expansion!
by GEO
8 people found this helpful
by Tj
1 person found this helpful
Works just fine !!!! Good product.
Works just fine !!!! Good product.
by Willie
I haven't used it yet other than test firing some...
I haven't used it yet other than test firing some nails. I have never used a nail gun before, but it sure seems like its going to save me a whole lot of time and pain in the arms/wrists. I purchased to build a shed and wish I had it when I built my deck. About the only thing I can think that may sting a bit is the price of nails. Dang things are a bit pricey! Overall, I think the cost savings make it worth purchasing. I did compare nail prices to Metabo (Which are way cheaper) but I ended up purchasing the Paslode after serious time spent researching and asking professionals that use these things every day! Good Luck!!
Smooth operation and easy to use
Smooth operation and easy to use
by asapdel
It sure did meet my expectations I recommend this...
It sure did meet my expectations I recommend this tool to anyone, thank You!!!
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Best air nailer
I’ve used many nailers and this is the BEST. Incredible balance and designed to avoid user fatigue. Extremely durable and gets the job done. Outstanding product!!
by 4fixit
Showing 1-10 of 64 reviews