According to the spec’s it weighs 6.8 pounds!
Yes, but be sure to prepare the base properly to support driveway use.
Yes. You can buy the stones individually. The 7x7 inch stones are around $1.70 each at my local HD. I have purchased many this way.
YOU will need about 45 of this for 10 by 12 area.
Use a brick set chisel and hammer to score both sides before hitting sharply on the scored line.
Calculate it as a full circle (3.14 x radius squared) then divide by 2. Thank you for your inquiry!
JustMe, 10 X 20 = 200 sq ft or 28,800 sq in. These stones are 49 sq in. 28,800 / 49 = 587.75. So approximately 588 pavers to cover a 10 x 20 area. However I would recommend using different sizes Rumble stones for a better pattern.
You will need 98 blocks that will give you just over an 8 x4 ft. By a few inches both ways..
no- you need to use the large blocks 7x10.5x3.5