10-3/4 in. White Plastic, Curved Splash Guard Accessory Set for Bathtubs (1-pair)

A:  Thank you for your inquiry regarding this item from Prime-Line Products. These splash guards are best installed with a clear or white silicone-based adhesive Product, but wall and tub surfaces should be cleaned prior with alcohol to provide for a clean and permanent bond. Silicone adhesive is not provided with this item and must be purchased separately.

A:  No, use caulk.

A:  No adhesive tape. I used a very strong glue. 

A:  Thank you for your inquiry regarding this item from Prime-Line Products. Prime-Line only has white available.

A:  Thank you for your inquiry regarding this item from Prime-Line Products. It is designed for 90 degrees. If you choose to put it to whichever wall or tub that is not, you would have to fill in the gap with extra mildew resistance caulking adhesive stabilizing it until the adhesive cured. For faster service, be sure to take advantage of the LIVE CHAT option located in the middle right-hand side of your screen, where you can quickly connect to a representative for assistance. Otherwise, you can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at info@primeline.net.

A:  Yes, but you will have to first use a small bead of Liquid Nail or other adhesive to position them to be correct before caulking around them.

A:  Works Great

A:  Dint know, not going to use them. They came with nothing to install them, ie silicone. And these are really ugly!

A:  Yes, you can. I had the same situation where the angle wasn't 90 degrees. However, you can shift the guards to make it work. Any gap can be chalked. Be sure to clean the surface (I used rubbing alcohol) prior to chalking.

A:  I did that with mine.. have a shower curtain.. all ya gotta do is "stick it" in place.... I recommend GE no 10... silicone caulk comes in a smaller tube, sets up in 30 minutes.. it's anti mold... white.

A:  Yes, they are perfect for that application, the same reason I purchased them.

A:  Yes. That was our situation as well. We have a shower/tub combination with a shower curtain, and had problems of water running over the side of the tub at the ends, where the shower curtain meets the walls. The splash guards have stopped all overflowing water at the ends of the curtain.

A:  I believe they are designed for tubs with curtains. I don't think they would serve any purpose if you had doors.

A:  Thank you for your inquiry regarding this item from Prime-Line Products. Yes, the guards can be installed as long as back and bottom is a flat surface.For faster service, be sure to take advantage of the LIVE CHAT option located in the middle right-hand side of your screen, where you can quickly connect to a representative for assistance. Otherwise, you can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at info@primeline.net.