Door Hole Cover Plate, 2-5/8 in. Diameter, Satin Nickel

As shown in the picture there are two parts to each screw: a bolt and a socket. Only the socket has a Phillips head; the bolt has a blank head and is designed so it won't turn in its plate. Functionally, you can always buy a longer bolt for a thicker door, but of course you will have to match the threads on the socket, and you probably will want one with the same cone-shaped head and made of similar-colored metal (stainless steel would be close to the satin nickel color) But there's also the security issue. This is designed as a pair of plates to cover the hole securely where a door lock used to be installed; if it's important to you that the outside plate cannot be removed easily (for example, to keep someone from opening the door by sticking a finger or screwdriver into the hole and triggering the door latch), then be aware that a substitute (longer) bolt will probably have an ordinary Phillips head rather than a blank head and will not have the squared shank that prevents the bolt from turning in the cover plate on that side, so it will be easy for someone to unscrew from outside. If you have a separate deadbolt lock this may not matter to you.

Thank you for your inquiry regarding this item from Prime-Line Products. The minimum door thickness is 1 1/4".

Thank you for your inquiry regarding this item from Prime-Line Products. Yes you can. Please see an associate at your local Home Depot Paint department for assistance with proper surface preparation and color choice.

Thank you for your inquiry regarding this item from Prime-Line Products. It would depend on the hole spacing of the dummy handle you have. You may be able to use something like U 9529 to act as a hole cover/bushing. You could drill into the plated to mount the knob and put other screws around it to mount to the door. For faster service, be sure to take advantage of the LIVE CHAT option located in the middle right-hand side of your screen, where you can quickly connect to a representative for assistance. Otherwise, you can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at info@primeline.net.

Thank you for your inquiry regarding this item from Prime-Line Products. Either are sufficient. For faster service, be sure to take advantage of the LIVE CHAT option located in the middle right-hand side of your screen, where you can quickly connect to a representative for assistance. Otherwise, you can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at info@primeline.net.

Yes

Yes, I did!

Thank you for your inquiry regarding this item from Prime-Line Products. The closest finish that we to bronze for this item is an antique brass finish (model number U-10888). As for repainting this item, our suggestion would be to follow the manufacturer's instructions on how to prepare, prime and repaint this item with a new color and finish. Most likely their recommendations will instruct you to lightly sand the surfaces to be painted, and to remove all gloss, dirt and oils that may be present to provide for a better bond of the new paint. For faster service, be sure to take advantage of the CHAT option located in the lower right-hand corner of your screen, where you can quickly be connected to a representative for assistance. Otherwise, you can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at prodtech@primeline.net