Internet #100665797

Model #CSSB21-36 X

ProCoat 3/4 in. FIP x 3/4 in. MIP x 36 in. Stainless Steel Gas Connector 7/8 in. OD (255,900 BTU)

  • ProCoat exterior resists various chemicals and organic elements
  • Rated to withstand temperatures up to 150 F
  • Suitable for natural and LP gas systems
  • See More Details

Frequently Bought Together

+
+
Price:
$2738

Product Overview

BrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
  • California residents
  • 3/4 in. I.D. (7/8 in. O.D.) corrugated stainless steel with corrosion resistant coating
  • Steel fittings included: 3/4 in. FIP and 3/4 in. MIP (tapped 1/2 in. FIP)
  • ProCoat coating resistant to ammonia, chlorine, solder flux, muriatic acid as well as UV rays & salt
  • Use with natural and LP (propane) gases
  • 100% leak tested
  • Approved for indoor and outdoor use
  • Temperature rating: -40° to 150° F
  • Pressure rating: 1/2 psi maximum
  • Designed, machined and assembled in the USA
  • CSA certified

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Gas Fittings & Connectors

current product
ProCoat 3/4 in. FIP x 3/4 in. MIP x 36 in. Stainless Steel Gas Connector 7/8 in. OD (255,900 BTU)
Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 48 in. Stainless Steel Gas Connector 3/8 in. O.D. (28,300 BTU)Safety+PLUS2 (1/2 in. O.D.) Gas Dryer and Range Installation Kit w/ Thermal Excess Flow Valve (60,500 BTU)ProCoat 1 in. FIP x 1 in. MIP x 36 in. Stainless Steel Gas Connector 3/4 in. I.D. (255,900 BTU)
Brand BrassCraftBrassCraftBrassCraft
NameProCoat 3/4 in. FIP x 3/4 in. MIP x 36 in. Stainless Steel Gas Connector 7/8 in. OD (255,900 BTU)Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 48 in. Stainless Steel Gas Connector 3/8 in. O.D. (28,300 BTU)Safety+PLUS2 (1/2 in. O.D.) Gas Dryer and Range Installation Kit w/ Thermal Excess Flow Valve (60,500 BTU)ProCoat 1 in. FIP x 1 in. MIP x 36 in. Stainless Steel Gas Connector 3/4 in. I.D. (255,900 BTU)
Price
$2738
$2978
$3092
$3886
Ratings
(16)
(0)
(52)
(0)
View ProductView ProductView ProductView Product

Specifications

Dimensions

Inner diameter (in.)
0.75
Outer diameter (in.)
0.875
Product Depth (in.)
1.275
Product Height (in.)
14.25
Product Length (in.)
36 in
Product Width (in.)
10.25

Details

Connection type
FIP x MIP
Gas Vent Pipe and Fittings Accessory Type
Gas Appliance Connector
Inner material
Stainless steel
Maximum Pressure (psi)
.5
Maximum Working Temperature (F)
150
Minimum working temperature (F)
-40
Outer Material
Stainless steel
Product Weight (lb.)
1.33732
Returnable
180-Day

Warranty / Certifications

Certifications and Listings
CSA Listed
Manufacturer Warranty
Limited Manufacturer Warranty

Questions & Answers

5Questions7Answers

Can this be used to permanently connect a 130k BTU furnace? The run of 3/4” iron pipe is only 15’ from meter.

Asked by dylan January 7, 2020
2
Answers

Hello Dylan - The BrassCraft gas connect CSSB21-36 X has a BTU rating of 255,900 and is 36" long. This can be used to permanently connect to your furnace provide that it has the required BTU rating and is not going through any type of partition. If you require any further assistance, please don't hesitate to call our customer service at 877-277-7755.

Do the flare fittings come pre-installed or loose in the bag? Wondering if I can use a shutoff va...

Asked by CG April 16, 2019
2
Answers

Hi CG, the flare fittings should be loose in the bag. If they are not, you can simply unscrew the fitting from the end of your connector and make a direct connection with your gas ball valve, provided that your flare connections are the same size. If you have any additional questions or concerns, please give our Customer Support Team a call at 877-272-7755.

HI in the write up on this item after saying 3/4in.FIP x 3/4in MIP. it says ( TAPED 1/2 in) JUST ...

Asked by ZIMMER49 February 15, 2017
1
Answer

Dear Zimmer49, Thank you for your question! “Tapped” means that the ¾” MIP fitting has ½” female threading inside the male fitting. Essentially, it is a ¾” MIP fitting on the outside and a ½” FIP fitting on the inside. If you have any further questions or concerns, please reach out to our Customer Support Team toll-free at 877-272-7755.

can this be used to connect a mobile home to nat gas meter

Asked by jrob January 18, 2014
1
Answer

Jrob, Thank you for your question. This BrassCraft gas connector is certified to ANSI Z21.75 and allows its use “Between the permanent gas outlet of a manufactured home community or individual site and the piping inlet on a manufactured home”. Therefore, it can be used between the gas meter and the inlet of the mobile home. Please note the piping system operating pressures of ½ pound per square inch. Please verify with your local code authority for their requirements. When in doubt while dealing with gas installation, call a licensed plumber or a local gas company. You are also welcome to contact our Product Experts toll free at 877-272-7755.

where can I purchase part numberCSSB21-35?

Asked by dearko August 15, 2013
1
Answer

Dearko, Thank you for your inquiry. To confirm the availability of this BrassCraft ProCoat gas connector (Part # CSSB21-36) you can click on “Check Store Inventory” and enter your zip code to locate the nearest Home Depot store that carries this gas connector. We attached a screenshot that shows where that link is located on the page. You are also welcome to call our Customer Service product experts toll free at 877-272-7755 to find stores nearby.

Customer Reviews

  • 16 Customer Reviews
  • 4.9 out of 5 stars overall
100% of customers recommended.
Overall Ratings
5star-icon(14)
4star-icon(2)
3star-icon(0)
2star-icon(0)
1star-icon(0)
Sort By:
Excellent quality gas line!
Excellent quality gas line!
Was this helpful?
0
0
5 Star Review
Rating provided by a verified purchaser
Was this helpful?
0
0
Quality cable, easy connection on a 95000 BTU natural gas...
Quality cable, easy connection on a 95000 BTU natural gas stove.
Was this helpful?
0
0
Good quality
Good quality
Was this helpful?
0
0
Worked perfect for 200kbtu tankless wh. Would have been...
Worked perfect for 200kbtu tankless wh. Would have been 5star if included the EFV. The EFV is harder to find for these high flow CSST.
Was this helpful?
0
0
It was exactly what I needed for my tankless water heater supply line. Other products showed 3/4...
It was exactly what I needed for my tankless water heater supply line. Other products showed 3/4 inch fittings but did not have 3/4 inch tube. This was had 3/4 inch tubing to go with 3/4 inch fittings.
Was this helpful?
0
0
It's no 1 for restaurant connection home depot is price competitive and delivery came faster than...
It's no 1 for restaurant connection home depot is price competitive and delivery came faster thanks for home depot
Was this helpful?
0
0
Response from BrassCraft MfgMarch 2, 2018
Hello Jihad-Thank you for your review and choosing our products. We are happy our ProCoat 3/4 in. FIP x 3/4in. MIP x 36in Stainless Steel Gas Connector 7/8 in OD worked well for you. We look forward to you choosing BrassCraft products in the future!
The gas connector hose work great very easy to install...
The gas connector hose work great very easy to install
Was this helpful?
0
0
Response from BrassCraft MfgMarch 3, 2018
Hello Tyler-We are happy to hear that the gas connector worked great and the installation of the item was easy. We hope you choose BrassCraft products for your next DIY project. Call our Customer Support Team at 877-272-7755 if there is anything we can help you with.
It's ok ...
It's ok
Was this helpful?
0
0
Response from BrassCraft MfgMarch 2, 2018
Hello Wladyslaw-Thank you choosing our product and for your review. We look forward to you choosing BrassCraft products in the future! We’d love the opportunity to speak more with you about it.
Please reach out to our Customer Support Team toll-free at 877-272-7755 and reference this review.
Easy to install, clear instructions, appears to be of good...
Easy to install, clear instructions, appears to be of good quality.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers