![]() | ![]() | ![]() | ![]() | |
Brand | Vigoro | Valley View Industries | ProFlex | ProFlex |
Name | 60 ft. No-Dig Landscape Edging Kit | 48 ft. L Diamond Lok Paver Edging with 40 Anchor Stakes | 48 ft. Paver Edging Project Kit in Black | 36 ft. Contractor Pack Paver Edging |
Price | $3998 | $5959 | $6900 | |
Ratings | (1699) | (55) | (436) | (73) |
Product Height (in.) | 1.5 | 1.75 in | 1.8 in | 1.8 in |
Product Length (ft.) | 60 ft | 6 | 48 ft | |
Material | Polyethylene | Polypropylene | Vinyl | Vinyl |
Product Width (in.) | 720 | 2.5 in | 2.8 in | 2.8 in |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Vigoro | Valley View Industries | ProFlex | ProFlex |
Name | 60 ft. No-Dig Landscape Edging Kit | 48 ft. L Diamond Lok Paver Edging with 40 Anchor Stakes | 48 ft. Paver Edging Project Kit in Black | 36 ft. Contractor Pack Paver Edging |
Price | $3998 | $5959 | $6900 | |
Ratings | (1699) | (55) | (436) | (73) |
Product Height (in.) | ||||
Product Length (ft.) | ||||
Material | ||||
Product Width (in.) | ||||
View Product | View Product | View Product | View Product |
Yes, it will bend 90 degrees. I used channel type pliers to make a 90 degree bend on one 8" section at the end of the edging and another 4" section at the end of another section of edging. Just use the wrench to bend it over the edge of a table. I assume you could bend it in the middle of the edging as well if you were to push one end down over the table edge.
It doesn't come with spikes.
Cheyenne I'm not sure I only saw black when I ordered it.
It is made in strips of 6 feet
Yes, can be installed after pavers are laid. Just keep in mind that you need at least 3" cleareance around the pavers (3" is the size of the foot that will be held in place by stakes). Also take in consideration the 1.75" in height (this is the height of the edging that butts against the pavers)
Edging is 6 feet x 2 inches high
Jon if you can get a nice clean flat surface it should nail down fine against the brick
1-3/4 inch. It won't be visible after installation with 2-3/8 pavers. The width is 2-5/8.
Nick it's just about 2 inches high and 6 feet long.
I purchased this product in the last two weeks.