Internet #307393222

Model # BL-5000SLX AC 110v

0849672011972

BL-5000SLX 5,000 lbs. Capacity Portable Car Lift

  • 5,000-lb. capacity lift reaches full rise in just 31 seconds
  • Open-center design provides clear under-vehicle access
  • Quick connect/disconnect hoses for fast, no-leak setup
$ 1,499 00 (limit 2 per order)
Loading Options

Frequently Bought Together

Frequently Bought Together

Product Overview

  • 5,000-lb. capacity lift reaches full rise in just 31 seconds
  • Open-center design provides clear under-vehicle access
  • Quick connect/disconnect hoses for fast, no-leak setup
Revolutionize the way you get your car in the air with the QuickJack BL-5000SLX portable car lifting system, which eliminates struggling with ramps and jacks and gets your car ready for maintenance in seconds. This system is a 5,000 lb. capacity automotive lift made from the same materials you'll find in a professional shop or garage. It features durable 14-Gauge welded steel frames, quick connect hoses for quick, leak-free setup and a portable power unit; you can toss this system in your trunk or backseat when you’re on the go or store it in the corner when you’re not. It reaches full rise in just 31 seconds and offers dual-locking positions of mid-level and full-rise. Boasting a 3 in. collapsed height, its low-profile jack frames fit under most race cars, and without any cross members, you can match frame positions to almost any vehicle width. An air compressor is not necessary to operate QuickJack. The portable power unit is electric over hydraulic and contains a built-in flow divider that ensures equal fluid pressure is given to both cylinders. No air required. There is a secondary "air spring" cylinder that helps QuickJack lower smoothly to the ground when there is no weight on the frames. This cylinder needs to be filled to 40-50 psi during setup and rarely needs to be refilled.
  • Plugs into 110V AC wall outlet power to operate
  • Remote pendant control features a 13 ft. cord
  • Dual locking positions mid level and full rise
  • QuickJack is designed to lift an entire vehicle with both frames by engaging the OEM recommended lifting points
  • Strong 14-Gauge welded steel frames
  • Low-profile jack frames fit under most race cars
  • Recommended that you always use QuickJack on a flat surface; anything greater than a 3° slope is not considered safe
  • As long as QuickJack's mechanical safety locks are engaged, vehicles can be raised and stored indefinitely
  • Extended, cantilevered rubber block trays provide increased rubber block reach
  • Portable power unit features a remote push-button control for simple operation
  • Steel mounted urethane wheels provide effortless rolling of jack frames on floor
  • Power unit features a built-in hydraulic flow divider for precise equalized lifting
  • Convenient handles allow for easy positioning of the jack frames
  • Integrated power-assist canisters increase the lowering speed
  • Hydraulic cylinders feature integrated velocity-fuse safety valves
  • Includes an 8-piece set of adjustable and stackable rubber lift blocks to support cars at precise locations for increased stability and safety
  • Detailed installation, maintenance and safety instructions accompany each QuickJack system
  • Includes: (2) ea. jack frame assemblies, (2) ea. 150 in. hydraulic hoses, (2) ea. 14 in. aux. hoses, (2) ea. quick-mount handles, (4) ea. 1.5 in. x 3 in. x 4 in. rubber lifting blocks, (4) ea. 3 in. x 3 in. x 4 in. rubber lifting blocks, (1) mini hydraulic power unit with pendant control
  • Your Quickjack portable car lift comes in 3 managable boxes; no forklift needed; box 1 (108 lbs.), box 2 (102 lbs.), box 3(24 lbs.)


















Product Overview

  • 5,000-lb. capacity lift reaches full rise in just 31 seconds
  • Open-center design provides clear under-vehicle access
  • Quick connect/disconnect hoses for fast, no-leak setup
Model #: BL-5000SLX AC 110v
Internet #: 307393222

Revolutionize the way you get your car in the air with the QuickJack BL-5000SLX portable car lifting system, which eliminates struggling with ramps and jacks and gets your car ready for maintenance in seconds. This system is a 5,000 lb. capacity automotive lift made from the same materials you'll find in a professional shop or garage. It features durable 14-Gauge welded steel frames, quick connect hoses for quick, leak-free setup and a portable power unit; you can toss this system in your trunk or backseat when you’re on the go or store it in the corner when you’re not. It reaches full rise in just 31 seconds and offers dual-locking positions of mid-level and full-rise. Boasting a 3 in. collapsed height, its low-profile jack frames fit under most race cars, and without any cross members, you can match frame positions to almost any vehicle width. An air compressor is not necessary to operate QuickJack. The portable power unit is electric over hydraulic and contains a built-in flow divider that ensures equal fluid pressure is given to both cylinders. No air required. There is a secondary "air spring" cylinder that helps QuickJack lower smoothly to the ground when there is no weight on the frames. This cylinder needs to be filled to 40-50 psi during setup and rarely needs to be refilled.

  • Plugs into 110V AC wall outlet power to operate
  • Remote pendant control features a 13 ft. cord
  • Dual locking positions mid level and full rise
  • QuickJack is designed to lift an entire vehicle with both frames by engaging the OEM recommended lifting points
  • Strong 14-Gauge welded steel frames
  • Low-profile jack frames fit under most race cars
  • Recommended that you always use QuickJack on a flat surface; anything greater than a 3° slope is not considered safe
  • As long as QuickJack's mechanical safety locks are engaged, vehicles can be raised and stored indefinitely
  • Extended, cantilevered rubber block trays provide increased rubber block reach
  • Portable power unit features a remote push-button control for simple operation
  • Steel mounted urethane wheels provide effortless rolling of jack frames on floor
  • Power unit features a built-in hydraulic flow divider for precise equalized lifting
  • Convenient handles allow for easy positioning of the jack frames
  • Integrated power-assist canisters increase the lowering speed
  • Hydraulic cylinders feature integrated velocity-fuse safety valves
  • Includes an 8-piece set of adjustable and stackable rubber lift blocks to support cars at precise locations for increased stability and safety
  • Detailed installation, maintenance and safety instructions accompany each QuickJack system
  • Includes: (2) ea. jack frame assemblies, (2) ea. 150 in. hydraulic hoses, (2) ea. 14 in. aux. hoses, (2) ea. quick-mount handles, (4) ea. 1.5 in. x 3 in. x 4 in. rubber lifting blocks, (4) ea. 3 in. x 3 in. x 4 in. rubber lifting blocks, (1) mini hydraulic power unit with pendant control
  • Your Quickjack portable car lift comes in 3 managable boxes; no forklift needed; box 1 (108 lbs.), box 2 (102 lbs.), box 3(24 lbs.)


















Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Top Rated
Brand TUXEDO QUICKJACK TUXEDO TUXEDO
Name Car Rotator 3,000 lbs. Capacity Heavy Duty Design BL-5000SLX 5,000 lbs. Capacity Portable Car Lift Asymmetric 2 Post Clear Floor 9,000 lbs. Capacity Heavy Duty in Black Symmetric 2 Post Floor Plate 9,000 lbs. Capacity Heavy Duty in Black
Price
$1,069.00
$1,499.00
$2,099.99
$2,099.99
Ratings (1) (679) (2) (4)
General Part Type Portable Car Lift Portable Car Lift 2 Post Car Lift 2 Post Car Lift
Included Hardware No Additional Items Included Adapters Adapters
Features Folding No Additional Features,Wheels No Additional Features No Additional Features
Minimum Lift Height (in.) 4 3.5 4 4
Weight Capacity (lb.) 3000 lb 5000 lb 9000 lb 9000 lb
Maximum Lift Height (in.) 45 17.6 72 72
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
70 in
Product Height (in.)
3 in
Product Width (in.)
11 in

Details

Car Lift Application
Commercial,Residential
Car Lift Type
Scissor
Features
No Additional Features,Wheels
General Part Type
Portable Car Lift
Included
No Additional Items Included
Material
Steel
Maximum Lift Height (in.)
17.6
Minimum Lift Height (in.)
3.5
Number of Vertical Supports
2
Product Weight (lb.)
238 lb
Returnable
180-Day
Weight Capacity (lb.)
5000 lb

Warranty / Certifications

Manufacturer Warranty
1 Year Structural, 1 Year Parts, 1 Year Shipping

Specifications

Dimensions

Product Depth (in.)
70 in
Product Height (in.)
3 in
Product Width (in.)
11 in

Details

Car Lift Application
Commercial,Residential
Car Lift Type
Scissor
Features
No Additional Features,Wheels
General Part Type
Portable Car Lift
Included
No Additional Items Included
Material
Steel
Maximum Lift Height (in.)
17.6
Minimum Lift Height (in.)
3.5
Number of Vertical Supports
2
Product Weight (lb.)
238 lb
Returnable
180-Day
Weight Capacity (lb.)
5000 lb

Warranty / Certifications

Manufacturer Warranty
1 Year Structural, 1 Year Parts, 1 Year Shipping

Questions & Answers

Once elevated, is there a lock on the system to prevent unexpected lowering if the air system fails?

Once elevated, is there a lock on the system to prevent unexpected lowering if the air system fails?
Asked by: Fred
there are locks in the system, however I am using additional safety measures, such as additional jackstands or wheels/tires to prevent injury should a freak accident occur.
Answered by: KITT
Date published: 2020-01-30

I know this plugs into a wall outlet, but is there a way to connect it to the car battery as a power supply?

Asked by: Smurf
Yes: https://www.quickjack.com/alternate-power-unit/
Answered by: VmaxJo
Date published: 2020-08-20

Do you get 1 or the pair at this price?

Asked by: Kingralphie1
The package includes everything you need. You get two lifting frames, one left and one right, and the hydraulic power unit.
Answered by: aj2101
Date published: 2020-01-28

After initial setup and secure lockup, can tech get underneat to working safely and freely without afditional support with jack stands??? Thanks

Not sure, if both jacks up with vehicle on above ground are safely for working underneats for any repairing?
Asked by: BostonTennisPlayer
only a FOOL gets under a 14 gauge steel device like this with out safety jacks underneath it. yes, it is more than likely completely safe..with that said, your life depends on being wise and prudent with shop equipment- put jacks underneath if you wish to work on the underside.
Answered by: matt
Date published: 2020-11-21
  • y_2021, m_1, d_15, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_98
  • loc_, sid_307393222, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 3ms
  • QUESTIONS, PRODUCT