#1 Home Improvement Retailer

Internet #307393222

Model #BL-5000SLX AC 110v

BL-5000SLX 5,000 lbs. Capacity Portable Car Lift

$136500
Limit 5 per order
Apply Now
$undefined.00 /mo* suggested payments with months* financingApply Now
  • 5,000-lb. capacity lift reaches full rise in just 31 seconds
  • Open-center design provides clear under-vehicle access
  • Quick connect/disconnect hoses for fast, no-leak setup
  • See More Details

Frequently Bought Together

Top Rated
+
+
Price:
$136500

Product Overview

Revolutionize the way you get your car in the air with the QuickJack BL-5000SLX portable car lifting system, which eliminates struggling with ramps and jacks and gets your car ready for maintenance in seconds. This system is a 5,000 lb. capacity automotive lift made from the same materials you'll find in a professional shop or garage. It features durable 14-Gauge welded steel frames, quick connect hoses for quick, leak-free setup and a portable power unit; you can toss this system in your trunk or backseat when you're on the go or store it in the corner when you're not. It reaches full rise in just 31 seconds and offers dual-locking positions of mid-level and full-rise. Boasting a 3 in. collapsed height, its low-profile jack frames fit under most race cars, and without any cross members, you can match frame positions to almost any vehicle width. An air compressor is not necessary to operate QuickJack. The portable power unit is electric over hydraulic and contains a built-in flow divider that ensures equal fluid pressure is given to both cylinders. No air required. There is a secondary "air spring" cylinder that helps QuickJack lower smoothly to the ground when there is no weight on the frames. This cylinder needs to be filled to 40-50 psi during setup and rarely needs to be refilled.
  • Plugs into 110V AC wall outlet power to operate
  • Remote pendant control features a 13 ft. cord
  • Dual locking positions mid level and full rise
  • QuickJack is designed to lift an entire vehicle with both frames by engaging the OEM recommended lifting points
  • Strong 14-Gauge welded steel frames
  • Low-profile jack frames fit under most race cars
  • Recommended that you always use QuickJack on a flat surface; anything greater than a 3° slope is not considered safe
  • As long as QuickJack's mechanical safety locks are engaged, vehicles can be raised and stored indefinitely
  • Extended, cantilevered rubber block trays provide increased rubber block reach
  • Portable power unit features a remote push-button control for simple operation
  • Steel mounted urethane wheels provide effortless rolling of jack frames on floor
  • Power unit features a built-in hydraulic flow divider for precise equalized lifting
  • Convenient handles allow for easy positioning of the jack frames
  • Integrated power-assist canisters increase the lowering speed
  • Hydraulic cylinders feature integrated velocity-fuse safety valves
  • Includes an 8-piece set of adjustable and stackable rubber lift blocks to support cars at precise locations for increased stability and safety
  • Detailed installation, maintenance and safety instructions accompany each QuickJack system
  • Includes: (2) ea. jack frame assemblies, (2) ea. 150 in. hydraulic hoses, (2) ea. 14 in. aux. hoses, (2) ea. quick-mount handles, (4) ea. 1.5 in. x 3 in. x 4 in. rubber lifting blocks, (4) ea. 3 in. x 3 in. x 4 in. rubber lifting blocks, (1) mini hydraulic power unit with pendant control
  • Your Quickjack portable car lift comes in 3 managable boxes; no forklift needed; box 1 (108 lbs.), box 2 (102 lbs.), box 3(24 lbs.)


















Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

BL-5000SLX 5,000 lbs. Capacity Portable Car Lift

Compare Similar Car Lifts

current product
Top RatedBL-5000SLX 5,000 lbs. Capacity Portable Car Lift
Top RatedBL-5000SLX 5,000 lbs. Capacity Portable Car Lift Bundle Package with 4pc pinch weld blocks and wall hangersCar Rotator 3,000 lbs. Capacity Heavy Duty Design6,000 lbs. Capacity Portable Mid-Rise 2 Post Car Lift
BrandQUICKJACKQUICKJACKTUXEDOMAX JAX
NameBL-5000SLX 5,000 lbs. Capacity Portable Car LiftBL-5000SLX 5,000 lbs. Capacity Portable Car Lift Bundle Package with 4pc pinch weld blocks and wall hangersCar Rotator 3,000 lbs. Capacity Heavy Duty Design6,000 lbs. Capacity Portable Mid-Rise 2 Post Car Lift
Price
$136500
$153200
/bundle
$169399
$275000
/pallet
Ratings
(511)
(558)
(2)
(24)
Weight Capacity (lb.)5000 lb50003000 lb6000 lb
General Part TypePortable Car LiftScissor LiftPortable Car Lift2 Post Car Lift
Maximum Lift Height (in.)17.617.64550.50
Minimum Lift Height (in.)3.53.544.50
IncludedNo Additional Items IncludedHandle,Hoses,Lifting BlocksHardwareNo Additional Items Included
FeaturesNo Additional Features,WheelsNo Additional FeaturesFoldingWheels
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
70 in
Product Height (in.)
3 in
Product Width (in.)
11 in

Details

Car Lift Application
Commercial,Residential
Car Lift Type
Scissor
Features
No Additional Features,Wheels
General Part Type
Portable Car Lift
Included
No Additional Items Included
Material
Steel
Maximum Lift Height (in.)
17.6
Minimum Lift Height (in.)
3.5
Number of Vertical Supports
2
Product Weight (lb.)
238 lb
Returnable
90-Day
Weight Capacity (lb.)
5000 lb

Warranty / Certifications

Manufacturer Warranty
1 Year Structural, 1 Year Parts, 1 Year Shipping

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.7
    out of 514 reviews
  • 94% recommend this product
Filter by:
Showing 1-10 of 514 reviews
This is a must have for the DIY folks
A slight learning curve to its operation, but well worth it. The hi-rise SUV/Truck adapters are a must for even stock a height P/U. Overall, I should've had these years ago.
by Dmjrsj
    • Recommended Product
    1 person found this helpful
    No pump
    Did not come with the pump. Inventory list shows “0” pump included. Not as advertised!
    by Disappointed
      • Recommended Product
      1 person found this helpful
      I couldn’t believe HD had this product and at the...
      I couldn’t believe HD had this product and at the best price of anyone! Quick Jack is perfect for my needs! I love it!
      by PeteB
      • Verified Purchase
      Product is as expected. Good quality and very useful for the home repairmen.
      Product is as expected. Good quality and very useful for the home repairmen.
      by Ross
      • Verified Purchase
      • Recommended Product
      Very Handy Well worth the price
      Put it together in about 90 minutes. Works very well. It needed to be used a few times before it worked perfect. There was a small leak in one of the quick connectors. I contacted support by email. They responded within 48 Hours. Fast. This was a X-mas present. One of the best I've ever had. They quickly said they would ship out a replacement with tracking number. That's good service I think. Works great for my Corvette. I would recommend this product highly. Home depot was easy to work with.
      by JeffR
        • Recommended Product
        1 person found this helpful
        Great product. Set up was less than an hour....
        Great product. Set up was less than an hour. They were easily bled following the stand up procedure. The C6 Corvette has been on the Quickjack for four weeks. I should have purchased these years ago.
        by HomeDepotCustomer
        • Verified Purchase
        1 person found this helpful
        These are fantastic. I should've bought them years ago. If you do your own oil changes or would...
        These are fantastic. I should've bought them years ago. If you do your own oil changes or would like to, these are a game changer. Pretty easy to setup. They are a little heavy but I'd be disappointed if they weren't. Don't over tighten the elbow fittings and damage the rubber gasket. I did and one of mine leaked a little. Not a huge deal. They still work just fine but for a few days (used twice in that time) I needed to wipe up a little ATF with a paper towel. Quickjacks customer service is great though and sent me a new elbow right away free. I think I received it in like 3 days but I'm in California with them.
        by DoorGuy
        • Verified Purchase
        • Recommended Product
        3 people found this helpful
        Easy to follow instructions. Wasn't hard to assemble. It raises the car quickly and is very stab...
        Easy to follow instructions. Wasn't hard to assemble. It raises the car quickly and is very stable when lifted, so no reservations about working underneath the car. About the only thing that was weird was when I put air in the shock. I had my compressor set to 45psi to be in the middle of the 40-50 psi range, but it would show ~70 psi after putting air in it. I would barely let a little out and it would show 20 psi. I had to play with this a little bit to get the pressure correct. Quick disconnects worked well - no hydraulic fluid leakage and the unit is quiet. The low profile was perfect for my corvette.
        by Steveh3
        • Verified Purchase
        • Recommended Product
        3 people found this helpful
        The lift was easy to assemble and simple to operate. I like to wrench on the weekends and this ma...
        The lift was easy to assemble and simple to operate. I like to wrench on the weekends and this make tinkering on my cars so much easier. They are sturdy and provide ample clearance, I will be getting rid of my old jack stands.
        by Fred
        • Verified Purchase
        • Recommended Product
        1 person found this helpful
        First, when I ordered, I was concerned with the 1 month delivery time stated. These come direct f...
        First, when I ordered, I was concerned with the 1 month delivery time stated. These come direct from Bendpak and I got mine in 2 weeks. I just received mine, and taking note of reviews, I assembled carefully using the most updated instructions. I actually found the included intsructions to be very detailed and easy to follow. Bleeding and testing was pretty straightforward using the quickjack video on youtube any problems I had were assembler error except for a leaking bleed screw. Laying it out for a test lift was not easy. I was using my t&c minivan and had to move the car and lifts several times to get lined up. Rolling around on the ground just like a jack and jackstands, took about 1/2 hour and these are not light. When laid out, the hoses come out the rear. I had visualized the front. Especially if you do not want to run over hoses. I got it up with no problem but would always use jack stands with this type of lift.. I'm sure this will get easier (we have 6 vehicles), but right now I would still use ramps to change oil. Even jacking them up and putting on stands was easier than trying to move these lifts into a certain spot. They supply handles that look like the go on the side rails, but I'm not smart enough to figure them out. There is even a hole for a bolt, I guess, but no holes in the frame. I would rather have spent the extra for a 2 post lift, but don't have the height in my garage. I'm sure it will serve well for longer term projects, or repairs that need to be done and tested and get back under again.
        by Tomsvl
          5 people found this helpful
          Showing 1-10 of 514 reviews