
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
For wall sheathing applications in new residential, commercial or agriculture buildings, the R-Matte Plus-3/Thermasheath-3 is a great solution. It is also for use in thermal retrofit construction to existing buildings. This rigid foam plastic thermal insulation board is composed of environmentally sound, closed cell, polyisocyanurate foam bonded to a durable white-matte (non-glare) aluminum facer and a reflective reinforced aluminum facer. This Energy Star qualified Rmatte Plus-3/Thermasheath-3 provides R5 with dimensions of .75 in. x 4 ft. x 8 ft. This product is designed for exterior and interior, non-structural uses.
 (1).jpg)

Coverage Area (sq. ft.) | 32 sq ft |
|---|---|
Product Length (ft.) | 8 ft |
Product Thickness (in.) | 0.75 in |
Product Width (in.) | 48 in |
Compatible Install Surface | Cement, Existing Drywall, Wood |
|---|---|
Faced or Unfaced | Faced |
Insulation Features | Formaldehyde Free |
Insulation Location | 2x4 Wall, 2x6 Wall, Attic, Basement, Ceiling Insulation, Crawlspace, Exterior Sheathing, Garage, Re-Siding |
Insulation R-Value | R5 |
Interior/Exterior | Exterior |
Number of Pieces | 1 |
Pack Size | 30 |
Product Weight (lb.) | 5.1 lb |
Returnable | 90-Day |
Sheathing Size | 8 ft. x 0.75 in. x 48 in. |
Sheathing Type | ISO |
Foam boards are not traditionally great for soundproofing.
It's not recommended to install the insulation directly against the radiant barrier on your ceiling. While it won't cause any harm to the product itself, it could negatively impact the effectiveness of the radiant barrier. For optimal performance, it's best to have an air gap between the radiant barrier and the insulation.
Yes, there are 30 pieces in a pack.
This insulation can be used on a kitchen ceiling. Install it tightly between the joists and in direct contact with the underside of the ceiling. Then seal the boards with either construction or HVAC tape to the joists and adjacent boards to create an airtight layer. Either facer, white or silver, may face the interior of the kitchen.
Yes, this product has two aluminum facers. One facer is white-matte (non-glare) and the other is reflective reinforced aluminum.
This insulation board comes in a pack of 30, covering a total area of 32 sq ft. Each board measures 0.75 in. x 4 ft. x 8 ft.
Dave, It is not recommended to install the insulation on the ceiling with adhesive only. However, Sika Construction Adhesive is recommended as part of the attachment solution. Use the glue and a couple of plastic cap nails to temporarily secure the insulation board. Then when installing the required gypsum or wood paneling, the fastening needed for the gypsum will be sufficient to hold the insulation in place.
The insulation is relatively easy to cut with a utility knife or circular saw. They might be able to cut a piece or two for you. Please ask an associate for help.
Viewing 1-8 of 77
3.7 out of 5