1-Layer Standard Pleated Paper Filter for Most 5 Gal. and Larger RIDGID Wet/Dry Shop Vacuums (8-Pack)
- Fits RIDGID vacuums 5 gallons or larger
- Durable, 1-layer filter material resists clogging
- Patented Qwik Lock filter fastening system for easy filter change
- See More Details
Frequently Bought Together
Product Overview
GENERAL DIRT AND DEBRIS
Filter designed with 1 layer of filtration that captures general dust and debris.
BEST FOR
1-Layer filtration for general dirt and dust found in the home, garage, or shop.
EXTEND VACUUM LIFE
Pairing RIDGID filters and vacuums helps protect the motor from harmful dust and debris, extending the vacuum’s life.
EASY TO INSTALL
Detach the lid and place the motor upside down in the drum. Locate the filter cage.
FILTER SIZE
This filter will fit your vacuum if your filter cage height is 8-9 inches.
HOW TO INSTALL
Place filter on top. Press down near the center of the filter with both thumbs until the rubber opening of the filter locks in securely.
HOW TO REMOVE
Press one thumb on the plastic tip and simultaneously pull up on the filter from the side tabs.
Washable Filter
Filter can be lightly washed for reuse. Allow filter to dry before using again.
Quick Install
Filter installs easily with our patented Qwik Lock® system.
8-Pack
Buy more and save. Significant savings when purchasing the 8-Pack.
Compatible Vacuums
Compatible with RIDGID vacuums 5 gallons and larger.
Filtration Options
RIDGID offers alternative filtration options including the VF5000 Fine Dust, VF6000 HEPA Media, and VF7000 Wet Filter.
Replace
Change filter when vacuum performance decreases.
- Washable and reusable
- Traps typical shop, garage and jobsite debris
- Simple installation
- Includes 8 filters
- Fits 5 Gal. RIDGID Vacs and 6 Gal. to 9 Gal. Husky vacs
Info & Guides
Product Overview
- Fits RIDGID vacuums 5 gallons or larger
- Durable, 1-layer filter material resists clogging
- Patented Qwik Lock filter fastening system for easy filter change
Key Features
GENERAL DIRT AND DEBRIS
Filter designed with 1 layer of filtration that captures general dust and debris.
BEST FOR
1-Layer filtration for general dirt and dust found in the home, garage, or shop.
EXTEND VACUUM LIFE
Pairing RIDGID filters and vacuums helps protect the motor from harmful dust and debris, extending the vacuum’s life.
EASY TO INSTALL
Detach the lid and place the motor upside down in the drum. Locate the filter cage.
FILTER SIZE
This filter will fit your vacuum if your filter cage height is 8-9 inches.
HOW TO INSTALL
Place filter on top. Press down near the center of the filter with both thumbs until the rubber opening of the filter locks in securely.
HOW TO REMOVE
Press one thumb on the plastic tip and simultaneously pull up on the filter from the side tabs.
Washable Filter
Filter can be lightly washed for reuse. Allow filter to dry before using again.
Quick Install
Filter installs easily with our patented Qwik Lock® system.
8-Pack
Buy more and save. Significant savings when purchasing the 8-Pack.
Compatible Vacuums
Compatible with RIDGID vacuums 5 gallons and larger.
Filtration Options
RIDGID offers alternative filtration options including the VF5000 Fine Dust, VF6000 HEPA Media, and VF7000 Wet Filter.
Replace
Change filter when vacuum performance decreases.
Specifications
Dimensions
Details
Warranty / Certifications
Questions & Answers
What is the right way to wash these filters?
Asked by Whitey July 23, 2016It was winter, couldn't blow it outside but I vacuumed the filter with another vacuum I had. You could then wash it if you wanted to. The material isn't really paper & it's durable.
Does the WR4000 filter include the cap that the nut tightens onto?
Asked by jbwat July 15, 2012Keep the nut you already have... they are reusable forever.
Should Filter be removed to vacuum wet?
Asked by Kipper April 5, 2016No for small amounts. Yes for large. Although operating without a filter risk damaging vac motor. "If you're picking up small amounts of liquid, the filter may be left in place. For large amounts, you can remove the filter or buy a separate wet foam filter VF7000 to further protect the motor." Rigid states. I would not risk vac'ing without a filter. Rather than switch filters, I leave the wet filter on and use a bag when vac'ing dry debris. Much easier emptying, leaves bin and filter clean, increases filter life immensely, and I always have a wet filter ready to go! Easier and economical for DIY projects. Plus, saves time not needing to change or clean filters while maintaining great suction. Bags are great! Link to Model # VF7000, RIDGID's Wet Application Foam Filter for Most 5 Gal. and Larger RIDGID Wet/Dry Shop Vacuums - https://www.homedepot.com/p/RIDGID-Wet-Application-Foam-Filter-for-Most-5-Gal-and-Larger-RIDGID-Wet-Dry-Shop-Vacuums-VF7000/202554976 Link to Rigids bags; https://www.homedepot.com/p/RIDGID-High-Efficiency-Size-A-Dust-Bags-for-12-Gal-to-16-Gal-RIDGID-Wet-Dry-Vacs-2-Pack-VF3502/100390230
Does this also need a paper sweeper bag inside for picking up fine ashes.
Asked by Dee December 13, 2020Hello, Thank you for your question! Yes, this will need the filter bag since this VF4000 Standard Filter is not designed for fine ashes. Or, you could upgrade to VF5000 Fine Dust filter instead. We don't know the model number of your vac, but you could contact us directly to confirm whether your model can use a dust collection bag. Most of our RIDGID vacs with the suction port on the drum can use a filter bag. You may call our Customer Service at 1-800-474-3443 from Monday to Friday between 8:00 AM to 5:00 PM Central Time or send us an email at info@ridgidvacs.com and we'll be glad to assist you. Thanks, RIDGID Wet/Dry Vac Customer Support
Will this fit a 12 gallon Rigid vac model WD12000?
Asked by Farmer April 30, 2020Really? You have to ask that??? That info is already posted on the Home Depot website, or just Google it, or READ the MANUAL!!!
Does it fit Rigid shop vac 6 gallon model WD07450?
Asked by shirley March 14, 2019I have a rigid 16 gal. shop vac so I cannot say it will fit yours.
Will this fit a Husky 10 Gallon 5 HP Model 8111011
Asked by Steve December 12, 2020Hello, Thank you for your question! This VF4000 filter is designed for RIDGID 5-gallon and larger Wet Dry Vacuums only. hence, it will not fit the Husky 10-gallon vac. Please consider contacting your vacuum's manufacturer. For any other concerns bout our products, please call our Customer Service at 1-800-474-3443 from Monday to Friday between 8:00 AM to 5:00 PM Central Time or send us an email at info@ridgidvacs.com and we'll be glad to assist you. Thanks, RIDGID Wet/Dry Vac Customer Support
Is this a proper replacement for a Craftsman 6 gal shop wet dry van?
Asked by spence December 22, 2012nope
Is there any other way to pick up dry if you don't have a filter
Asked by Vicki May 25, 2018Hello Vicki, We're sorry there is no other way to pick up dry materials without a filter. It's important to have the filter installed in the vac for dry pickups as it stops any dirt or debris from entering and damaging the motor. Thanks, RIDGID
Do I take the filter off when I am using it as a wetvac?
Asked by artieb April 21, 2014yes the paper filter is removed
Customer Reviews
Explore More on homedepot.com
Outdoor Living
Storage and Cleaning Supplies
Tools and Hardware