RIDGID introduces the Universal Mobile Miter Saw Stand with Mounting Braces. The stand is compatible with most common miter saws and the utility vehicle sets up in seconds. The stand features an upright folding design for easy storage, set-up and break down. Backed by the Industry Leading Lifetime Service Agreement, this Mobile Miter Saw Stand and Utility Vehicle includes two mounting brackets, two material stops, two material supports, hardware, two wheels, a handle, 2 ft., a frame support leg, and an operators manual.
Large 12 in. wheels for superior mobility even over stair treads
Installed mounting braces for user installed 1 x 8 work surface
Tool-free indexing extension lock levers for fast and secure adjustment
Single-step release for fast setup
Universal mounting brackets
Tool-free material stops for repetitive cuts
Lifetime service agreement with registration within 90 days of purchase
Includes: Stand, (2) mounting brackets, (2) material stops, (2) material supports, hardware, (2) wheels, (1) handle, (2) feet, (1) frame support leg, and an operator's manual
As others reported, there are production problems with this stand: the receiver tubes for the bottom bar are bent in, thus the base stand does not fit. The wheel axles aren’t perfectly straight, but usable. Also, a key nut and bolt was missing. In spite of this, the stand generally seems well-built. It is sturdy and stable. It weighs 67 pounds, thus too heavy for me to lift into a vehicle with the saw attached. It’s currently sold for $80 less in a Special Deal: Model AC9946-RPM121
by
Jan 19, 2022
The absolute best stand for the money
The best stand for the money.... Easy set up easy to move and makes my job super easy.... No more bending down on to the ground....I did baseboards usually takes me 3 days.... With this stand it took me 2.... Buy it... You won't regret it
by
Verified Purchase
Recommended
Jan 19, 2022
I was a little bit nervous after reading the reviews...
I was a little bit nervous after reading the reviews about the hardware not working properly but I had no issues with mine. Everything went together like it supposed to and it is very sturdy. I’m very happy with it. The instructions are a little bit difficult to follow but not that big a deal.
by
Jan 11, 2022
SHOULD OF BOUGHT ONE YEARS AGO
NEEDED ONE OF THESE FOR YEARS...DON'T KNOW WHY I WAITED SO LONG...WORTH EVERY PENNY. I'M NOW ABLE TO MOVE MY MITER SAW AROUND EASILY (61 YRS OLD)...VERY STURDY...AND EASY SET-UP...LARGE WHEELS MAKE STEPS EASIER...
by
Verified Purchase
Recommended
1 found this review helpful
Dec 29, 2021
Wheels missing
Seriously frustrated. Purchased this from the store. Should have checked the box. The wheels are missing.
Hopefully, I can make this right without having to take it back. Will update when I have a resolution.
by
Dec 11, 2021
'Universal' Stand
I haven't actually used this yet, but I'm reviewing the fact that I bought this to go with a Milwaukee Tool 12-inch Dual Bevel Sliding Compound Mitre Saw Model # 6955-20. BUT with this saw, the way it rotates to the mitre spots, the mounting nut and bolts DO NOT WORK. They stick up too tall and don't allow full rotation, plus the back ones stop the saw from extending back. Even if you use their option 2 of mounting on a board, it still wouldn't work. My fix, after 2 days of trying to figure it out, was to turn the mounting bars around, buy new operator side hex nuts and bolts (5/8ths) that can sink in the spots and sawed off the back ones. You have to make sure they can be reachable inside the mounting bars. I like the saw and I like the stand, I'm just trying to make others less frustrated.
by
Recommended
Customer review from homedepot.ca
Dec 6, 2021
Disappointing quality
Picked this miter stand up with high hopes, but to my dismay, the quality left a lot to be desired. I found quite a few blatant issues during assembly. Tubes so far out of round that I had to hammer them out in order to slide the mating piece.
by
1 found this review helpful
Oct 24, 2021
Stand was Rigid, carton not so much
Ordered online last week. Fed Ex delivered pretty quickly. Only issue was the box appeared to have been opened. Not like the tape came loose. The tape was cleanly cut down the middle and the ends. Only thing holding it together was the two white nylon bands. Not happy. Got it opened and all appeared to be there except the instructions. second thing I checked for was the bent tubing many reviews mentioned. Rather than drag it back to the store I used some vise grip pliers and a towel to protect the metal an fixed the tubing. looking at the box it looked pretty straightforward. So I put it together in about 30-35 minutes. Seems pretty sturdy and folds easily. My saw is a Rigid and went on very easily. Mount the rails to yourself first then drop the whole thing onto the stand.On a side note I had to call customer support about something else and was very happy with how fast someone answered and was able to help me completely.
by
1 found this review helpful
Sep 26, 2021
Good stand, but . . .
Stand obviously a return. Don't sell it as new. Tubing deformed; used crowbar to get right, plus mallet to fit parts. Scuff marks where product was put together and taken apart before. Bad manual; English OK, but pics separate from text.
by
Recommended
4 found this review helpful
Jul 6, 2021
The brackets r not working as universal
Bought this item last xmax. Took an HR assemble and look heavy duty. Just roll it out put the Delta 10 " miter saw on found out only can mount 2 holes the other 2 won't fit ( need the brackets to middle). Then when I tilted to storage Miter saw started to slide down the brackets doesn't hold it in place. Check the mount bracket screw adjusted it to make sure it lock down, still having an issues. :( I have use wire tie to try hold it place til I contact Customer service