#1 Home Improvement Retailer

Internet # 100117949

Model # 6700-1

Store SKU # 694389

Store SO SKU #1001371185

Creamy Tan 1 Gal. Indoor/Outdoor Carpet and Artificial Grass Adhesive

$26.05
Apply Now
Pay $1.05 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • For installation of indoor, outdoor carpet, and artificial grass
  • Compatible with a variety of substrates, 24- hour cure time
  • Powered by Microban for superior mold and mildew protection
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

ROBERTS 6700 adhesive is formulated for installation of exterior and interior carpet, as well as artificial turf. It is a SBR latex, solvent-free adhesive offering high initial strength and an improved environmental footprint. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. ROBERTS 6700 can be used to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings. Made in the USA, this non-flammable adhesive can be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires.

Highlights

  • Click here to shop more ROBERTS flooring Adhesive
  • SBR latex for high initial strength and an improved environmental footprint
  • Compatible with most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings
  • Covers up to 110 sq. ft. per gallon depending on trowel type, substrate, and installation conditions
  • Moisture Control Adhesive - up to 5 lbs. MVER and 80% RH
  • For indoor and outdoor residential, and commercial use
  • Powered by Microban, antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation
  • Made in the USA
  • Made in the USA
  • Return Policy

Product Information

Internet # 100117949

Model # 6700-1

Store SKU # 694389

Store SO SKU #1001371185

Specifications

Details

Color Family

Tan

Container Size (gallons)

1 gal

Returnable

90-Day

Turf Tool Type

Adhesive

Warranty / Certifications

Manufacturer Warranty

Adhesive Bond: Limited Lifetime (when installed by Certified Flooring Pro) or Limited 10 Years

Questions & Answers

191Questions
caret
Q:Does this glue work on asphalt?
by|Jul 2, 2024
1 Answer
Answer This Question

A:  Yes, aged asphalt paving is an approved substrate for the 6700 adhesive. Customer Care

by|Jul 3, 2024
    caret
    Q:Does this glue stay tacky or cure hard? How does this glue interact with EPDM?
    by|Jul 2, 2024
    1 Answer
    Answer This Question

    A:  The 6700 indoor/outdoor adhesive cures hard if installed per the installation instructions. For EPDM we would recommend our Roberts 1550 adhesive if it is EPDM flooring such as playground flooring. It cannot be used with EPDM roofing products. Customer Care

    by|Jul 2, 2024
      caret
      Q:Should I put this down with a heavy roller in order to ensure a proper bond?
      by|Jul 1, 2024
      1 Answer
      Answer This Question

      A:  A 75lb roller would be recommended for best results. Customer Care

      by|Jul 1, 2024
        caret
        Q:Would the 6700 or the 3095 be best for gluing rubber backed carpet tiles to a cement basement floor?
        by|Jun 28, 2024
        1 Answer
        Answer This Question

        A:  For rubber backed carpet tile application to a cement floor we would recommend our Roberts 7399 adhesive. Customer Care

        by|Jul 1, 2024
          Showing 1-4 of 191

          Customer Reviews

          4.1 out of 5

          • 4.1 out of 806 reviews
          • 78% recommend this product
          Filter by:
          Showing 1-10 of 806 reviews
          Contracter
          Very good product to work with wait time is less than other brand
          by
          • Verified Purchase
          Worked perfectly for outdoor roofing project
          We used this product for an unusual project - gluing "grass" outdoor carpet to the roof of our screen porch to reduce the noise of rain and falling nuts. Due to our roof having a composite composition we wondered if it would work - and it did! Very, very pleased with the results. No more TV-drowning noise from the roof!
          by
          • Verified Purchase
          • Recommended
          The product worked as expected.
          The product worked as expected.
          by
          • Verified Purchase
          • Recommended
          HORRIBLE PRODUCT
          Followed instructions and used on outdoor carpet on covered porch! The glued bled through the gray carpet leaving white marks all over! Ruined a 12 x 25 piece of carpet. Would not recommend this adhesive!
          by
          Response from The ManufacturerAug 11, 2020
          Roberts understands installing a new outdoor floor covering can be challenging. Here are some key product usage points regarding the 6700 adhesive that may improve performance and satisfaction. Adhesive bleed through is most commonly caused by the adhesive field lacking the appropriate amount of open time. During the installation process- after the adhesive is applied to the substrate, the adhesive will need to stand open for approximately 20-30 minutes prior to the carpet entering the adhesive field. This ensures the adhesive doesn't filter through the carpet backing and into the fibers. This also ensures the adhesive builds bond strength and promotes the curing process over the next 24-48 hours. - Bailey Customer Care QEP
            • Recommended
            8 found this review helpful
            Great Product! Works as intended. Package was damaged, however product was OK. We will see in tim...
            Great Product! Works as intended. Package was damaged, however product was OK. We will see in time how well it holds up...
            by
              • Recommended
              Worked great on my boat carpet
              Worked great on my boat carpet
              by
              • Verified Purchase
              • Recommended
              2 found this review helpful
              This product worked great for attaching indoor/outdoor carpet to my cellar stairs. I cut the car...
              This product worked great for attaching indoor/outdoor carpet to my cellar stairs. I cut the carpet to fit the full tread with enough carpet to fold over the front. Then glued it to the top of the tread only and let it dry. Once dried I turned the front edge and and stapled it to the underside with a pneumatic stapler. Very happy with the clean look.
              by
              • Verified Purchase
              • Recommended
              2 found this review helpful
              Easy to apply, I used a paintbrush. Used a layer of about a 1/4 inch. I clamped down the starting...
              Easy to apply, I used a paintbrush. Used a layer of about a 1/4 inch. I clamped down the starting point and rubbed the carpet over the adhesive and let it set over night. It was ready for wear after that. Clean up was pretty simple for hands you just lightly scrubbed with soap and hot water.
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              I used CV this to adhere large upholstery sections to plywood panels for the interior of my 1967...
              I used CV this to adhere large upholstery sections to plywood panels for the interior of my 1967 van project. Easy to spread, easy to reposition if needed. Very low odor. Good value and performance.
              by
              • Verified Purchase
              • Recommended
              2 found this review helpful
              i'm floored that this is the best way to put on carpet glue. make sure you have a lot!! and it's ...
              i'm floored that this is the best way to put on carpet glue. make sure you have a lot!! and it's not cheap. corners don't stay you need a very thick coating to get a full adhesion. overall very dissatisfied with the process.. laminate counters and contact cement to me sounds like a better way to go
              by
              • Verified Purchase
              4 found this review helpful
              Showing 1-10 of 806 reviews