Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Enhance the look of your home with the quick-drying Toscana Beige Limewash Interior/Exterior Paint by Romabio. With the self-priming, one-coat process, you can achieve a distinct whitewash effect on unpainted brick, stone or other masonry surfaces. This paint features a non-toxic formula that won't peel or chip off and is breathable and UV resistant for lasting use. A one-coat application covers around 250 sq. ft. per gallon.
Container Size | 1 Gallon | Coverage Area (sq. ft.) | 300 |
---|
Application | Masonry, Stucco & Brick | Application Method | Brush, Paint Sprayer |
---|---|---|---|
Base Material | Lime | Color Family | Beige / Cream |
Color/Finish | Limewash Toscana Beige | Dry To Touch Time (hh:mm) | 00:20 |
Interior/Exterior | Exterior, Interior | Maximum Optimal Temperature (F) | 90 |
Minimum Optimal Temperature (F) | 50 | Paint/Stain Clean Up | Soap & Water |
Paint/Stain Features | Durable, Fast Drying, Fire Retardant, Limewash Paint, Low Odor, Low VOC, Mold Resistant, One Coat Coverage, Removable/Temporary, UV/Fade Resistant | Recommended Number of Coats | 1 |
Returnable | Non-Returnable | Sheen | Flat/Matte |
Stain & Sealer In One | No | Surface Location | Basement Wall, Deck, House & Concrete, Exterior Wall, Pavers, Porch & Patio |
Surface Material Use | Brick, Cement, Concrete, Plaster, Stone, Stucco | Time before recoating (hours) | 2 |
Transparency | Solid | Vertical/Horizontal | Vertical / Horizontal |
Manufacturer Warranty | NA |
---|
Classico Limewash is a lime-based mineral paint that's formulated to be absorbed by natural brick/stone and calcify to them. This method allows the limewashed surface to remain breathable, while providing a beautiful transformation. You can find more information on the product here: https://romabio.com/classicolimewash/
As mike said, we recommend purchasing a smaller container to test the product before buying in larger quantities. You can also request color cards from Romabio by emailing info@romabio.com. Once it has been opened, it is not eligible for return.
No, if you are unsure of the color, purchase a small sample of the color to try before buying a bigger quantity. Mike
Classico Limewash is formulated for application on absorbent brick or stone. Without a mineral surface for the product to adhere to, it will likely dry on the surface and flake off. MicroGrip Primer can be used as a base coat to provide a uniform mineral surface that will help with adhesion, but the Classico Limewash can't be distressed after, and would need to be applied for full coverage.
Hi! Diluting Classico Limewash more than the recommended 50-70% isn't recommended, as it increases the rate of wear/fading. It can absolutely be done, but it will likely require more frequent touchups. If you were to go this route, we recommend using Mineral Shield to extend the life of your Classico Limewash by protecting it from external moisture.
Yes, Classico Limewash can be applied with a professional-grade airless sprayer (tip of 0.519″ – 0.521″) or an HVLP spray gun (tip: 1.4mm-1.5mm)!
MicroGrip Primer would be required as a base coat to ensure that the Classico Limewash has a proper mineral surface to adhere to. Once the primer has dried, you can proceed with Classico Limewash!
Hi! Unfortunately, Classico Limewash isn't formulated for walkable surfaces. Because it isn't made with the scuff-resistance needed for these surfaces, it would wear easily and require frequent touchups. We hope this helps!
Unfortunately, none of our products are formulated to repair damaged brick. We recommend reaching out to a mason for this matter. However, our Classico Limewash, Lime Slurry, and Venetian Glaze are all mineral paints formulated for absorbent stone/brick. I hope this helps!
Viewing 1-8 of 245
4.8 out of 5