|Container Size||1 Quart||Coverage Area (sq. ft.)||120|
|Application||Masonry, Stucco & Brick||Application Method||Brush, Paint Sprayer|
|Base Material||Lime||Color Family||Beige|
|Color/Finish||Limewash Toscana Beige||Dry To Touch Time (hh:mm)||00:20|
|Interior/Exterior||Exterior, Interior||Maximum Optimal Temperature (F)||90|
|Minimum Optimal Temperature (F)||50||Paint/Stain Clean Up||Soap & Water|
|Paint/Stain Features||Durable, Fast Drying, Fire Retardant, Limewash Paint, Low Odor, Low VOC, Mold Resistant, One Coat Coverage, Removable/Temporary, UV/Fade Resistant||Recommended Number of Coats||1|
|Stain & Sealer In One||No||Surface Location||Basement Wall, Deck, House & Concrete, Exterior Wall, Pavers, Porch & Patio|
|Surface Material Use||Brick, Cement, Concrete, Plaster, Stone, Stucco||Time before recoating (hours)||2|
|Transparency||Solid||Vertical/Horizontal||Vertical / Horizontal|
A: Hi Erin. Romabio does not sell any shiny topcoats for Classico Limewash. You can look into other products but we aware that some may yellow as a reaction to the limewash.
A: Hi Dawn. Using Classico Limewash on raw, unpainted, unsealed wood has been done been the application is very dependent on where you are applying it and what look you are trying to get. Reach out to customer support at firstname.lastname@example.org so they can advise if it will work for your project.
A: Yes, It works fine for that purpose.
A: Hi Rachel, No. We would not recommend Classico Limewash® on a high traffic or horizontal surface such as a countertop. It's not a washable finish and we don't offer a product currently that could seal it for that purpose.