4 Gal. Nube Gray Limewash Interior/Exterior Paint

I am very happy with the results of this project, using the ROMABIO Nube Gray Limewash. We purchased 1 gal to cover about 350 sq ft of red/orange brick. Worked great!

We used this on our stone tile kitchen backsplash. My countertops and backsplash clashed and our builder choose our backsplash last minute when the tile we requested was late. Needles to say we hated it so we used this wash and even after sealing every splatter and dirt mark shoes and this is coming off where I clean. We are now removing and replacing it

Ok, so here is our situation and how this limewash (Nube Gray) worked for us. We had a retaining wall installed when we were on vacation and came back and hated the look. It was stone wall with dark stones and white stones which gave it a look some may like, but we just didn't. We got the limewash and first tried it diluted as they prescribe, which was about 1 to 1 with water. That looked too opaque and chalky after it dried, so hosed it off, tried a bunch of dilutions to increase the transparency to let some of the stone's color show through while toning down the dark stones. Romabio isn't going to like this, but we did 1 to 6 ratio (1 quart limewash to 6 quarts water) which was just about right, could have gone more. So almost two gallons from one quart and it worked great on over 50 feet of retaining wall, all with one quart! Went back and wiped down the whiter stones to let some of the color and texture show through while leaving the dark stones as is. We didn't do the whole spraying the wall thing, just left it on except where we hand wiped the lighter stones with wet rag. Got a surprise rain storm two days later and surprisingly it only improved the look from the picture below, looks more natural now. This product is great! If you don't like the look, hose it off (a little scrubbing). If you don't like the level of opacity, add more water and try again. If you want it antiqued, hit it with your hose. Just a great solution, after paying what we did for the wall, spending a few bucks for this solution was a savior.

This is an amazing product. You can completely adjust the level of coverage or opacity you want. I was able to get the German smear look I wanted and completely cover the ugly color of the original brick.

Very easy to use. Significant appearance change!

I used this product to wash the front exterior of my home in order to refresh the look. We’ve had several neighbors stop by to ask how we did it, and they were impressed by the final work. I would recommend Romobio to anyone that wants to update their home

This product transformed out red brick fireplace in to another dimension

Easy to apply and gives great selection of effect.

Updated my old fireplace with the grey limewash instead of paint after reading you could remove within 5 days if you didn't like it. I was a little intimidated at first, but grew confident pretty guickly, it was so easy! I used a damp sponge to wet instead of spraying which worked fine. Initially I started with less water and found it too dark and ended up using the 1:1 ratio. Because my bricks are not even, there was no need to go back with a rag afterward to wash. A little messy, but wipes off with a wet paper towel. The fireplace is double sided, 8 ft high and the quart was plenty, though it didn't look like it in the bucket!

This transformed the brick on my house and was super easy to use.