Internet #203810823

Model #P320

Store SKU #632013

Store SO SKU #1000463421

18-Volt ONE+ Cordless AirStrike 18-Gauge Brad Nailer (Tool Only) with Sample Nails

  • Most compact and lightweight battery powered 18-Gauge Brad Nailer
  • Includes: Sample Nails and Belt Clip
  • Over 175 ONE+ Tools – All Work With Any RYOBI ONE+ 18V Battery
  • See More Details

Frequently Bought Together

+
+
Price:
$9900
$129.00
Save $30.00 (23%)

Product Overview

18-Volt Battery Platform

18-Volt Battery Platform

No matter your interests or skill level, we can power it. With cordless lithium-ion technology, RYOBI can power you through all types of projects from drilling, driving, cutting, and fastening, to lighting, plumbing, cooling, and rocking, to trimming, edging, mowing, and clearing – and so much more.

World’s Largest 18V Tool System

World’s Largest 18V Tool System

RYOBI gives you the ultimate in versatility and selection to get the job done. From household tasks to the jobsite to recreation and everything in between, there is a ONE+ product for you.

RYOBI ONE+ Delivers More

RYOBI ONE+

RYOBI has never changed – and will never change – the 18V ONE+ battery platform, meaning our newest products & batteries fit the original RYOBI tools and batteries from 1996. RYOBI ONE+ is the system that delivers more.

Power Tools

Power Tools

Whether it’s a weekend DIY project or a full remodeling job, RYOBI ONE+ has you covered with all the tools you need to get the job done.

Lawn & Garden Equipment

Lawn & Garden Equipment

From trimming and edging, to mowing and clearing, knock out lawn care with one battery platform that does it all.

Air Tools

Air Tools

Make your next nailing, stapling, inflating, and deflating jobs a breeze with cordless air tools from RYOBI ONE+.

Lifestyle Products

Lifestyle Products

Enjoy our expansive lineup of lifestyle, craft, and specialty tools including audio equipment, lights, fans, vacuums, soldering irons, and much more!

RYOBI ONE+

RYOBI ONE+

Put the power of 18V ONE+ at your fingertips from the cordless system that delivers more.

18V Lithium

18V Lithium

Lithium-ion battery technology with fade-free power and Extreme Weather Performance to withstand the toughest conditions.

3 Year Limited Warranty

3 Year Limited Warranty

RYOBI Portable Power Tools and Bench/Stationary tools purchased on or after 1.1.11 are covered by a 3-year warranty.

World’s Largest

World’s Largest

The RYOBI 18V ONE+ System gives you the ultimate in versatility and selection.

100% Compatible

100% Compatible

All RYOBI 18V tools and batteries are 100% forwards and backwards compatible. Any RYOBI 18V tool works with any of our 18V batteries.

90 Day Guarantee

90 Day Guarantee

Buy with confidence with our 90 day no-risk satisfaction guarantee.

RYOBI introduces the 18-Volt ONE+ Cordless AirStrike 18-Gauge Brad Nailer (Tool-Only) with Sample Nails. This 18-gauge brad nailer features AirStrike Technology, which eliminates the need for noisy compressors, bulky hoses, or expensive gas cartridges. This means faster setup and easier maneuvering on the job site. The RYOBI P320 AirStrike Brad Nailer drives 18-Gauge nails from 5/8 in. to 2 in. long. Best of all, it is part of the RYOBI ONE+ System of over 175 Cordless Tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, this nailer includes a belt clip, sample nails, and an operator's manual. Battery and charger sold separately.
  • California residents
  • Selectable drive shift with single sequential or contact actuation
  • Contact actuated mode for production speed up to 60 nails per minute
  • Tool-free depth-of-drive adjustment helps protect work surface and allows proper setting of nail heads
  • Single sequential mode for precision placement
  • Convenient adjustment dial regulates air pressure for optimum results
  • Dry-fire lockout feature extends tool life
  • Toolless jam release for easy access to clear nails
  • Low-nail indicator to quickly and easily see when it is time to reload
  • Belt hook mounts to the right or left side for added convenience
  • 2 non-marring pads to keep work surface free of tool marks
  • Part of the RYOBI ONE+ System of over 175 Cordless Tools
  • 3-year manufacturer's warranty
  • Includes: (1) P320 18-Volt ONE+ Cordless AirStrike 18-Gauge Brad Nailer, sample nails, belt clip, and operator's manual
  • Battery and charger sold separately
  • *Stem Pack Style Battery
  • Need Help? CLICK HERE to view our Nail Gun Buying Guide
  • Check out our helpful buying guide to learn more about nailers.






  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
11.73
Product Height (in.)
10.24
Product Width (in.)
3.54

Details

Air Tool Type
Air Nailer
Battery Amp Hours
No Battery
Battery/Charger
Tool Only
Charger Included
Charger Not Included
Condition
New
Cordless/ Corded
Cordless
Included
Nails
Maximum Fastener Size
2 in
Minimum Fastener Size
5/8 in
Motor Type
Brushed
Nail Gauge
18
Nailgun Angle
0
Number of Total Batteries Included
0
Power Type
Cordless Electric
Reconditioned
No
Returnable
180-Day
Tools Product Type
Air Tool

Questions & Answers

900Questions37Answers

What is the difference between the models P197 and P192?

Asked by Answerman November 23, 2020
0
Answers

Does this take crown staples as well

Asked by DH November 21, 2020
3
Answers

Hi Dh, Thanks for your question! This RYOBI 18-Volt ONE+ Cordless AirStrike 18-Gauge Brad Nailer (Tool Only) with Sample Nails can only be used with 18 gauge brad nail fasteners. Thanks for asking! - Eve

Dies jigsaw have s safety or is it pull trigger and cut

Asked by Cse5 November 20, 2020
2
Answers

Hello Cse5, Thanks for your interest in the RYOBI 18-Volt ONE+ Cordless Orbital Jig Saw (Tool-Only) P5231. This jig saw has a lock on trigger with a variable speed dial allows for slow starts to fast cutting. The lock-on button is convenient when cutting for extended periods of time. It is located on the handle above the switch. I hope this helps, and let RYOBI know if we can assist you in the future. - Eve

I want a sander that I can use to remove old paint and finish what would work best?

Asked by Mer November 17, 2020
5
Answers

I would buy a dedicated paint and finish removing tool like the Wagner PaintEater (tm) or just buy similar discs that fit on an angle grinder, if you have one. Nereids is the name of a commpany that sells these, I think. They work the best.

Is this good for building kitchen cabinets

Asked by Cr96 November 17, 2020
7
Answers

I suppose you could use it to build cabinets, however I would not recommend it for that as the nails are too small to provide the needed structural strength required for cabinetry. I have used my Airstrike to help in the assembly of cabinets, using it to hold things together while I drilled holes and used proper sized screws and wood glue to finish assembly. Any trim work I did, the Airstrike is the perfect tool. This is even more important if you would be using particle board or plywood which do not hold nails well. Not sure this helps you exactly, as I am basing my response on my own experiences and wood project failures using nails. Good luck with your project!

is there lifetime warranty

Asked by dan November 14, 2020
4
Answers

Hello Dan, The RYOBI 18-Volt ONE+ Cordless AirStrike 18-Gauge Brad Nailer (Tool Only) with Sample Nails only has a 3 year warranty. Thanks for asking! - Eve

What kind of nail gun do I need for a roofing

Asked by Mayflo November 13, 2020
4
Answers

A roofing nailer designed to hold roofing nails, assuming you are putting on asphalt composite shingles. your local Home Depot store's tool department has the nailer you need. Just search by "roofing nailer" Good luck

can i keep this battery in my trunk with my 1/2 inch impact during the winter?

Asked by chris November 13, 2020
2
Answers

I keep it in my work truck, but your winter and mine might be different, I'm currently in Florida, before that Washington state and I never had any problems.

Is this nailer powerful enough for 5/8" thick oak baseboard?

Asked by TGD November 13, 2020
5
Answers

No. Pine or MDF yes, thick oak I doubt it. Better to use a compressor driven nail gun.

Can this fit stapes too?

Asked by Matt November 12, 2020
5
Answers

No, it can't, just brad nails.

18-Volt ONE+ Cordless AirStrike 18-Gauge Brad Nailer (Tool Only) with Sample Nails - page 2

Customer Reviews

  • 11222 Customer Reviews
  • 4.6 out of 5 stars overall
89% of customers recommended.
Overall Ratings
5star-icon(8288)
4star-icon(1800)
3star-icon(370)
2star-icon(239)
1star-icon(525)
Sort By:
Chino Hills, CA
I love all Ryobi tools I've purchased! This too!
Customer review from ryobitools.com logo
I am refurbishing a piece of outdoor rattan furniture and it works fantastic!
Was this helpful?
0
0
Good on the 1 1/2 inch. I had to set...
Good on the 1 1/2 inch. I had to set the tension all the way up to drive it in enough so that it would sit inside the wood. Just not quite enough power for the 2 inch. Used for standard crown molding, Baseboards and toe kicks
Was this helpful?
4
0
Los Angeles
Time saver! And it works flawlessly
Customer review from ryobitools.com logo
I bought this about a a few weeks ago, and man it's been awesome. No more lugging around a compressor, and making noise that rattles all the floors of an apartment complex. No issues so far. It's powerful!
Was this helpful?
0
0
Light weight but plenty powerful for occasional home projects. I...
Light weight but plenty powerful for occasional home projects. I use with 4A battery and 40 tooth carbide finishing blade for smooth cuts - an efficient combo. I built work bench with saw.
Was this helpful?
1
0
The only Ryobi tool so far I’ve been disappointed with
I have a ton of Ryobi tools and so far, this is the only one I’ve found to be a big disappointment. I used this to renovate a staircase in my house and needed to cut off 1.5 inch stair nosings. The saw is highly underpowered and would freeze up constantly. It’s fine for cutting down a 2x4 but for ripping down a 2x10 or even a 2x10 crosscut it really can’t handle it even with a better blade. Maybe the brushless version is better, but I’ll be going with another brand for the next circular I buy.
Was this helpful?
5
0
I bought this sander a month ago for smoothing plaster prior to painting. It worked fine for nail...
I bought this sander a month ago for smoothing plaster prior to painting. It worked fine for nail hole patches, but for larger areas - the sandpaper slips off the base within 30 seconds - consistently! I tried different densities & brands of sandpaper, but the slippage continues. In addition, the bag that holds the dust is too small ands needs to emptied frequently. I've learned that not all sanders are created equal - even though the price was right - it may be too small or the job. I am going to see if I can trade this one up because I like the Ryobi product and the convenience of the interchangeable battery.
Was this helpful?
2
0
U. B. E. , Pa.
Ryobi 18v air strike
Customer review from ryobitools.com logo
Awesome tool , and welcome addition to my Ryobi 18v collection ! Bought it to do an under sink repair , long over due ... To hard to bang nails in that position so purchased this , Wow am I glad I did !
Was this helpful?
0
0
Has quickly become my SECRET weapon!
Sometimes, you just need something... and you don't quite know what that thing is until you hold it in your hand. THIS. This is that something. I can't imagine life before nor after it. No more unsightly screw heads. No more clamps. Glue-ups just became a breeze. Cabinet fabrication has never been easier. $99? Yes, please! Would HAPPILY pay twice that for the amount of value this tool has afforded me. If you're a skilled tradesman/woman, you really shouldn't be looking past this tool. I primarily use Makita, but their brads leave something to be desired. The Ryobi has never, not one single time, misfired or not driven a brad all the way in. Once it's set, you can sort of just forget it and ride! It's a blast to use, and sometimes as a way to release boredom, I'll just go light up a board with a hundred or so nails. I've never even gotten the battery indicator on a 3aH battery to drop a single bar, and I've used this thing for hours! Ryobi is, hands down, the best tool value out there. When you just need a one-off and are already invested in another platform, give Ryobi your money. This brad nailer and the router are two of my favorite tools of all time. Add it to your bag... don't think about it for a second. Your value as a craftsman will exponetially increase with this tool.
Was this helpful?
16
0
Balch Springs. Tx
Excellent tool
Customer review from ryobitools.com logo
I purchased this tool for making my wooden American flags and toy boxes, a great time-saver. I had my doubts on how good it would work? But put about 10,000 nails in with it and I am glad I purchased this item. I have the router, skill saw, weed eater and blower. I.will be getting more of the tools and adding them to my collection. I do also of small projects made out of wood..
Was this helpful?
0
0
So easy to use.
I just got this nailer and love it. I'm a 70 year-old grandma who loves doing DIY projects. It doesn't scare me. It is quiet and I don't notice any kind of kick back. Easy to load the nails, and I can actually hold it against my work and press the trigger with one hand. So many tools are made for men with larger hands. The pressure adjustment sinks the nail just enough to caulk over it. I have many Ryobi tools and am very satisfied with them.
Was this helpful?
17
0
Review this Product
Share your thoughts with other customers