Hello Britt, Thank you for your inquiry. The RYOBI 6 in. Buffing Wheel Set(3-Piece), is intended to be used on a 6" Bench Grinder as pictured on the packaging as these are Wheels not pads for use on a machine like the RYOBI RB61G 6" Orbital Buffer, I hope this was helpful, have a great day. - Allen
Hello Warren! The set contains three buffing wheels to clean and polish steel, stainless steel, brass, and copper. The remainder of the specifications are on this page. I hope this helps! - Eve
HI Reddinggal. Sorry you are having an issues. Please call our customer service and they will help with getting this on correctly. They will need to know what model and brand of bench grinder you are using. 800-525-2579. With our model you have 2 cup washers that press against both sides of the buffing pad and the nut to tighten it down. They should mount the same way as the grinding wheel. Also the center hole could be a little tight and need a little force to push it on. Hope this helps. Greg
Yes, they will but you have to push hard on them and rotate the shaft.
Hi Osiris, The Corian counter tops surfaces have specific cleaning instructions you should follow those instructions for caring for the surface. Thanks for your interest. Greg
Haven't use on briar but have used on maple, ash and oak. Worked well.
They will work ok on that motor..
Hi KJ, This is rated for around 3600 rpms. Thanks for your interest. Greg
Yes, the buffing wheel set is made from cotton based materials.
Maybe with the buffing pad, but the 2 other pads are way too aggressive.