RYOBI introduces the 18V ONE+ Pex and PVC Shear Cutter for 1/4 in. to 2 in. and Pex Tubing Clamp Tool (Tools Only). The 2 in. stainless steel blade allows clean cuts from 1/4 in. to 2 in. thick in plastic tubing. This blade is also replaceable for continued performance. Featuring a quick blade release and a tool-free, one button blade change, this tool provides users with maximum efficiency. Power is no problem when pairing this ONE+ PVC and PEX Cutter with a ONE+ 2.0 Ah Battery (not included), providing 300 cuts on a single charge. The Cordless PEX Tubing Clamp Tool clamps with ease and efficiency with one button activation and an LED light indicating a complete clamp cycle. The 18V ONE+ PEX Pinch Clamp Tool fits all PEX clamps ring sizes so no job goes unfinished. Dual LED lights illuminate the workspace and the included belt clip make for ultimate portability on the jobsite. Innovation meets function for the ultimate jobsite solution. Best of all, it is part of the RYOBI ONE+ System of over 225 Cordless Tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, this kit includes an 18V ONE+ Lithium-Ion Cordless PVC and PEX Cutter, an 18V ONE+ Lithium-Ion Cordless PEX Tubing Clamp Tool with a go/no-go gauge, a belt clip, an operator’s manual. Battery and charger sold separately.
PVC and PEX Cutter: Cuts up to 2 in. PVC
PVC and PEX Cutter: 300 cuts on a single battery charge using a P190 RYOBI 18V ONE+ 2.0 Ah Battery (battery not included)
PVC and PEX Cutter: Replaces cumbersome manual cutters providing user convenience
PVC and PEX Cutter: Stainless steel blade for quick, clean, burr-free cuts
PVC and PEX Cutter: Quick blade release for increased productivity
PVC and PEX Cutter: Tool free, one button blade change
PVC and PEX Cutter: Open/Close trigger for easy operation
PVC and PEX Cutter: LED light to illuminate cutting surface
PEX Tubing Clamp Tool: Fits all PEX clamp ring sizes including 3/8 in., 1/4 in., 1/2 in., and 1 in.
PEX Tubing Clamp Tool: Dual LED lights illuminate the workspace
PEX Tubing Clamp Tool: Easy one-handed operation with one touch button activation
PEX Tubing Clamp Tool: Up to 400 clamps per charge using a RYOBI ONE+ P108 4.0 Ah LITHIUM+ Battery (not included)
PEX Tubing Clamp Tool: LED light to indicate completed clamp cycle
PEX Tubing Clamp Tool: Innovative design allows for efficiency on the jobsite
Part of the RYOBI 18V ONE+ System of over 225 Cordless Tools
3-year manufacturer's warranty
Includes: (1) P593 18V ONE+ PVC and PEX Cutter, (1) P660 PEX Pinch Clamp Tool, go/no-go gauge, belt clip, and operator's manual
1 in.,1-1/2 in.,1-1/4 in.,1-3/4 in.,1-5/8 in.,1/2 in.,1/4 in.,2 in.,3/4 in.
Maximum pipe or tube diameter (in.)
Maximum Pipe or Tube Diameter (in.)
Minimum pipe or tube diameter (in.)
Product Depth (in.)
Product Height (in.)
Product Width (in.)
Compatible Pipe Material
Pipe Cutter Type
Product Weight (lb.)
Tools Product Type
Warranty / Certifications
3-Year Manufacturer's Warranty
Questions & Answers
Typical questions asked about products:
Is the product durable?
Is the product easy to use?
What are the dimensions of the product?
out of 159 reviews
86% recommend this product
Showing 1-10 of 159 reviews
Aug 27, 2021
Mar 28, 2021
We’ve been breaking a lot of the one hand watts manual crimpers on 1” size.
These should do the trick.
Sep 5, 2020
Pure Garbage! If you need to make a quick cut for a diy project in which the pipe serves a purpos...
Pure Garbage! If you need to make a quick cut for a diy project in which the pipe serves a purpose other than to carry water your golden. If your intention is to use this to make a straight cut you are better off using a jagged rock! I went through 5 feet of 2" PVC to try and get a straight cut and did not get close, I even sharpened the blade. At the end I noticed the blade has too much play to be able to do anything straight.
2 people found this helpful
Jun 18, 2020
Doesn't cut straight
Have been looking for a good PVC cutting tool and came across this one. Looked sturdy and I already have the Ryobi 18V battery. I made the purchase at the store today and came home to do a few test cuts. I tried about 6 cuts on 1-1/2" Schedule 40 PVC and it just can't make a straight cut. It's off by 1/4" on every cut. 1/2" pvc not so bad. Ryobi, is this a defective unit or has it just not been field tested?
7 people found this helpful
Jun 7, 2020
We cut a lot of PVC pipe on our ranch, so this tool came in handy. It did not come with the batte...
We cut a lot of PVC pipe on our ranch, so this tool came in handy. It did not come with the battery or charger, which are different from other Ryobi batteries and chargers, so we had to wait until we could get that to try it out. (2 weeks due to COVID-19 affecting delivery). It is easy to operate. Note the pictures on the insert, which shows this more clearly. It has an easy-release button so it doesn't stick. It cuts fast and clean.
Let's start with the one draw back I had, it's a bit large for some of those undercabinet, smalle...
Let's start with the one draw back I had, it's a bit large for some of those undercabinet, smaller spaces. Now from there nothing but Great !, cut out my old sprinkler valve plumbing in nothing flat, as was cutting all the sections to plumb all the elbow and tees for the new valves. What a time saver.
Now we cut only Schedule 40 PVC Pipe 3/4 inch. Also cut a piece of 1 1/4 inch no problem and standard PVC 3/4 which seam to flexible and in one case broke before it cut.
Features are, the trigger operates the blade both ways and there's a quick release on the side that opens the blade manually. The safety trigger guard takes a few to get the hang of, but one thing for sure if you even a bit-release your grip it stops. This is great. LED light to illuminate cutting surface, 3-year manufacturer's warranty.
Includes: (1) P593 18-Volt ONE+ PVC and PEX Cutter and an operator’s manual --TOOL ONLY--
This is only the tool but we had a Ryobi base already, however, it wasn't the right one, so back ...
This is only the tool but we had a Ryobi base already, however, it wasn't the right one, so back to Home Depot to get the base which was expensive but worth it. Putting in piping at a friend's cabin and this was excellent. Cuts through the larger PVC and the Pex without damaging, especially without crushing even the smaller PVC piping. Would have given this 5 stars but concerned about the plastic casing not being as durable as other cordless tools.
Ryobi 18V cordless PVC/Pex cutter is a great option for my hydroponic setup. Cutting that much P...
Ryobi 18V cordless PVC/Pex cutter is a great option for my hydroponic setup. Cutting that much PVC for supply lines and drains with mechanical cutter would be very hard on my arthritic hands. I mistakenly thought one of my older compact Ryobi batteries would work with this cutter but find I must use the One+ 18V batteries. So I've ordered a new 2.5 Ah battery and charger. So I wasn't able to operate the tool for review, but can say the tool itself if substantial. It has a heft of weight to it and is substantial in build. I'd caution on the combined weight of the tool and larger battery. The design of the cutting end should hold the PVC securely and provide a straight cut. And the size of the blade and cutting area is easily large enough to accommodate a full 2 inch piece of material. The blade easily releases to open position and can be manually closed with a large green button. Instructions are helpful and clear. I'm happy more and more unique hand tools are being added to Ryobi's One+ system.
The Ryobi PVC/PEX cutter has been a great addition to my shop. Practical and straightforward, I u...
The Ryobi PVC/PEX cutter has been a great addition to my shop. Practical and straightforward, I use it to cut up to a 2-inch pipe. I have used it to cut washers out of PVC and pipe for my dust collection. It is over 5lbs with a battery, so not light, but this is not something I would be carrying around. It is built well, quiet, and has an all-metal jaw upfront. The only thing I wish they would have done differently is the LED. The LED is on or off. There is no light switch and the handle like there other tools, so the LED only operates when pulling the trigger, and the cutter is moving. This makes it pretty useless if I am trying to line it up for a cut in low light situations. I could hold the trigger to open the jaw, and the light would stay on, but the blade makes a popping sound, and it does not seem good for the tool.
Easy to use.
The blade is changeable.
The jaw has a quick open feature.
Easy to use safety switch.
Solid metal jaw.
Excellent and clean cuts.
the LED can only be activated when the jaw is moving.
No belt hook or rafter hook. Not even an option to add one.
The packaging is a little off-putting.
Well worth it, if you cut a lot of PVC or PEX, this makes the job very easy. I leave my hacksaw or manual cutters in the drawer now.
If you have ever cut PVC pipe, you can now get rid of your old hand cutters with this power PVC p...
If you have ever cut PVC pipe, you can now get rid of your old hand cutters with this power PVC pipe cutter. Unless you get an extra large hand cutter, most of the hand cutters only cut up to 1-1/2" pipe or smaller. This Ryobi power cutter cuts up to 2" pipe. When using a ratchet hand cutter the cut usually ends up at an angle and not very square. This cutter squares the cuts much more precisely than the hand cutters.
The speed at which it cuts is much faster than I would have imagined. A 1-1/4" pipe cut takes about 1 to 2 seconds if that. I have made about 50 cuts so far and the batter still shows 3/4 charge. The blade seems to remain just as sharp as the first cut and if it ever needs sharpening or replacement, it pops out very easily with a one button release.
I have the beginning of arthritis in my right hand and this has and will save me a lot of time, effort and pain with projects cutting PVC. If you have any projects or jobs with a lot of cuts this is well worth getting.
ONE+ 18V Pex and PVC Shear Cutter for 1/4 in. to 2 in. and PEX Crimp Ring Press Tool (Tools Only)
RYOBI introduces the 18V ONE+ Pex and PVCRYOBI introduces the 18V ONE+ Pex and PVC Shear Cutter for 1/4 in. to 2 in. and PEX Crimp Ring Press Tool (Tools Only). The 2 in. stainless steel blade allows clean cuts from 1/4 in. to 2 in. thick in plastic tubing. This blade is also replaceable for continued performance. Featuring a quick blade release and a tool-free, one button blade change, this tool provides users with maximum efficiency. Power is no problem when pairing this ONE+ PVC and PEX Cutter with a ONE+ 2.0 Ah Battery (not included), providing 300 cuts on a single charge. The 18V ONE+ PEX Crimp Ring Press Tool provides 320 crimps per charge (with the ONE+ P108 4.0 Ah LITHIUM+ Battery, not included) and an easy one-handed crimping operation, the Crimp Ring Press Tool eliminates user fatigue and allows you to get the job done faster. The crimp cycle takes less than 5 seconds with an LED light to indicate completion. Best of all, it is part of the RYOBI ONE+ System of over 225 Cordless Tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, this kit includes an 18V ONE+ Lithium-Ion Cordless PVC and PEX Cutter, an 18V ONE+ Lithium-Ion Cordless PEX Crimp Ring Press Tool with a Go/No Go Gauge, a Belt Clip, 1/2 in. and 3/4 in. Press Die Inserts and Pouch, and an operator's manual. Battery and charger are sold separately.See Full Product Description