Enhance your RYOBI 18V ONE+ System with the 18V ONE+ HP Brushless 21° Framing Nailer. ONE+ HP Technology delivers more power, runtime, durability and speed utilizing brushless motors, advanced electronics and HIGH PERFORMANCE lithium technology. Enjoy the convenience of AirStrike Technology, eliminating the need for noisy compressors, bulky hoses and expensive gas cartridges. This cordless framing nailer provides instant driving speed and the ability to drive up to 750 nails per charge on a 4.0 Ah HIGH PERFORMANCE battery (sold separately). The selectable drive switch allows you to choose between single sequential and contact actuation modes, for either precise or rapid, repetitive nail placement. This framing nailer delivers the power to sink up to 3-1/2 in. full round head nails. The tool-free depth of drive adjustment ensures that you are able to drive nails flush every time, even in the most dense materials. The on-board air fill valve enables field serviceability, which results in decreased downtime for you and your crew, and the integrated rafter hook allows for safe and easy on the job storage. Best of all, it is part of the RYOBI 18V ONE+ System of over 280 Cordless Products that all work on the same battery platform. The 18V ONE+ HP Brushless 21° Framing Nailer is backed by the RYOBI 3-Year Manufacturer's Warranty and includes the 18V framing nailer, rafter hook, belt hook, hex key, non-marring pad and operator’s manual. Battery and charger sold separately.
ONE+ HP Technology delivers instant driving speed and the power to sink up to 3-1/2 in. full round head nails
AirStrike Technology - No compressors, hoses, or gas cartridges needed
Selectable drive switch with single sequential and contact actuation modes
Tool-free depth of drive adjustment for proper setting of nail heads
On-board air fill valve for field serviceability and decreased downtime
Integrated rafter hook for easy on the job storage
Shock Absorber manages battery movement for optimal performance
Part of the RYOBI 18V ONE+ System of Over 280 Cordless Products
Q:When the PSI gets low, how do you refill the little tank to 125 PSI? Could it be done at a place where I put air in a car's tires? Thanks in advance.
by|Nov 27, 2023
1 Answer
Answer This Question
A: Hello, Nailgunoptions - Thank you for your question. Yes, that should be fine. If you have a compressor. Connect it to the valve and pressurize the tank to a maximum of 125 psi. Allow the tool to recharge
for approximately 30 seconds. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ HP 18V Brushless Cordless AirStrike 21° Framing Nailer (Tool Only). - Joyce
by|Nov 28, 2023
Q:Will this work with the same 18 volt batteries or does it require different batteries?
by|Nov 27, 2023
1 Answer
Answer This Question
A: Hello, Carl - Thank you for your question. Yes! All of our 18 volt batteries are compatible with all of our 18 volt tools. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ HP 18V Brushless Cordless AirStrike 21° Framing Nailer (Tool Only). - Joyce
by|Nov 28, 2023
Q:What is the largest diameter shank it can shoot? Can it shoot a 3 1/2 x 0.162 nail?
by|Nov 27, 2023
1 Answer
Answer This Question
A: Hello, Avail - Thank you for your question. The maximum nail shank diameter is, 0.131 in. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ HP 18V Brushless Cordless AirStrike 30° Framing Nailer (Tool Only). - Joyce
by|Nov 28, 2023
Q:What gage nail will this shoot? 8D? 16D?
by|Nov 24, 2023
1 Answer
Answer This Question
A: Hello, Dylan - Thank you for your question. Minimum nail shank diameter is, 0.113 in. and maximum nail shank diameter is, 0.131 in. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ HP 18V Brushless Cordless AirStrike 30° Framing Nailer (Tool Only). - Joyce
by|Nov 28, 2023
Showing 1-4 of 100
Customer Reviews
4.6 out of 5
(288)
4.6
out of 288 reviews
92% recommend this product
5
223
4
39
3
10
2
5
1
11
Filter by:
Showing 1-10 of 288 reviews
Nov 15, 2023
Tools
[This review was collected as part of a promotion.] Brought this about 30 days ago working great really nice tool
by
Recommended
Customer review from ryobitools.com
Nov 9, 2023
Amazing power!
[This review was collected as part of a promotion.] I purchased the framing nailer to speed up my shed building process. Boy this thing made that job a flash! Always drove the nails in first try!
by
Recommended
Customer review from ryobitools.com
Sep 27, 2023
Muy buena
[This review was collected as part of a promotion.] I love this tool I whant to have one more the same
by
Customer review from ryobitools.com
Sep 26, 2023
Impressive but two surprises- one pro and one con.
Impressive! The Ryobi One+ 18v brushless 30-degree framing nailer exceeded my expectations. It was a big improvement over a cordless nailer I had tried in the past. As others have said it is a little heavy but I found it balanced well and the more I used it- the easier it was to handle. It shot nails into pine lumber with no problems. So to test it I got 3 pieces of old oak flooring and it handled them as easy as the pine- I did have to adjust the depth adjustment screw to so head of nail was flush on the dried oak boards.
The one thing that has left me a little confused. The literature I read and the box indicated “NO COMPRESSOR, GAS CARTRIDGE OR HOSE NEEDED” and on the bottom of the retail packaging “%. On board air fill valve doe field serviabilityand decreased down time.”That is true when you are operating the nailer but they left out the asterisk* One you read the operators manual you will find the nailer has a built-in “AIR PRESSUER TANK,” The manual said: “after the initial use, you may notice a decrease in performance. Refilling the air pressure tank to 125psi can help restore he unit’s performance.” Then there is brief information about exposing the air fill stem and restoring the pressure to 125psi. At this point I do not know how long a full tank of air will last or how bad the performance will deteriorate- and if I need to take my compressor to a job site in case the performance “decreases” and I need to recharge the gun. The cover secured with a hex head screw is not located in an easily assessable area. Ryobi ould have been a little more up front about the need to periodically recharge the nailer to 125 psi.
Exelent gun, the battery lasts a long time, I recommend it 100%
by
Verified Purchase
3 found this review helpful
Jun 30, 2023
Top notch
I’ve always trusted Ryobi. They’ve always made some pretty great tools and this nailer is actually really very nice. I mean the quality that they put into it is excellent it’s really comfortable in your hand, and for those if you have who have never used one of these, I’m not gonna lie it is heavy, but it’s a good heavy and allows you to use it and it doesn’t really bounce that much. It’s easy to load without any issues and since it is Ryobi, you know it’s some pretty great quality.
by
Recommended
2 found this review helpful
Jun 18, 2023
Quality Cordless Framing Nailer
I have found the RYOBI ONE+ HP 18 Volt brushless cordless AirStrike 30° framing nailer to be a quality tool with nice features and also works very well. I have used nailers with a compressor for many years but when it’s a smaller job the battery powered nailer is so much more covenant. I am using a 4 Ahr battery and it should drive about 750 nails. I have always liked the 30 degree nailers for their ease to get into a tight spot. The drive switch allows you to select between single sequential and contact actuation modes for either precise or rapid and repeat nail placement. The depth adjustment is easy to use and I turned it about one turn to get my first test nails flush. This is the adjustment you will use the most as the length of the nails and the thickness and type of wood will change the depth adjustment. The Framing Nailer also has a rafter hook and a belt hook for convenience. This is not a light tool but I have compared it to a large framing nailer I have used for years and its very close in weight, plus you don’t have a hose to pull around especially when you are up on a ladder. This tool feels well balanced and easy to control. There is a compressed air chamber that requires refilling when performance decreases which is much better than having to buy gas cartridges. I am very pleased with this RYOBI AirStrike 30° Framing Nailer and expect to get many years of use from it. It comes with a 3-year manufacturer’s warranty.
Yes Virginia there is a extended capacity magazine
Just because Ryobi doesn't have one, doesn't mean there isn't one. Ridgid Model # AC102EM21N|Store SKU # 1001660551 is a DIRECT fit extended capacity magazine. Loosen the single bracket screw with the included 4 mm allen wrench, undo the 2 screws at the front of the short magazine and slide back and up. Reverse the process to put the longer magazine on; line it up and screw the two front screws snug, then tighten the bracket screw. Done. You now have a magazine that holds 2 1/2 cassettes of nails. You're Welcome.
by
Recommended
Customer review from homedepot.ca
Jun 6, 2023
Heavy but drives nails well and no hose needed
Pro's are that this does not need a hose or a compressor to drive framing nails. I did not try driving into engineered or hardwood lumber but I have no issues in fir lumber or pressure treated with 3.5" ring shanked nails. It can drive nails at a decent pace, not as fast as a pneumatic nailer. Not having a hose connected makes it nice tight spots. The battery seems to last a acceptable amount of time, I only saw it drop one bar in a few hundred nails. Does seem to be a little quieter than a pneumatic nailer. This is pretty compact for a framing nailer. No smell like you have with a Paslode nailer!
Con's: This is noticeably heavier than a pneumatic nailer. I would not want to be using it overhead or at arms length. But that is the trade off of not having to deal with a hose. This also only hold one strip of nails, most pneumatic nails I have used could take two. Not a huge issues, just need to refill more often. Kickback seems more than it should be considering how heavy this is. There is not much/any cushioning to minimize it either.
[This review was collected as part of a promotion.] I purchased this tool to build a 20 x 20 garage. It's a little heavy with a 6ah battery and a rigid extended magazine (perfect fit).
A great compromise for not needing a compressor and hoses.
A new battery will last a 10+ hour work day.
Tool survived a 5 foot drop.
Enhance your RYOBI 18V ONE+ System with the 18V ONE+ HP Brushless 30° Framing Nailer Kit with 4.0 Ah HIGH PERFORMANCE Battery and Charger. ONE+ HP Technology delivers more power, runtime, durability and speed utilizing brushless motors, advanced electronics and HIGH PERFORMANCE lithium technology. Enjoy the convenience of AirStrike Technology, eliminating the need for noisy compressors, bulky hoses and expensive gas cartridges. This cordless framing nailer provides instant driving speed and the ability to drive up to 750 nails per charge on a 4.0 Ah HIGH PERFORMANCE battery. The selectable drive switch allows you to choose between single sequential and contact actuation modes, for either precise or rapid, repetitive nail placement. This framing nailer delivers the power to sink up to 3-1/2 in. clipped or full head nails. The tool-free depth of drive adjustment ensures that you are able to drive nails flush every time, even in the most dense materials. The on-board air fill valve enables field serviceability, which results in decreased downtime for you and your crew, and the integrated rafter hook allows for safe and easy on the job storage. Best of all, it is part of the RYOBI 18V ONE+ System of over 280 Cordless Products that all work on the same battery platform. The 18V ONE+ HP Brushless 30° Framing Nailer is backed by the RYOBI 3-Year Manufacturer's Warranty and includes a rafter hook, belt hook, hex key, non-marring pad, 4.0 Ah Battery, Charger, and operator’s manual.
RIDGID introduces the R09894B 18V Brushless 21° Framing Nailer (Tool Only). Paired with any RIDGID 18V battery (not included), this framing nailer provides all the power of a pneumatic nailer, but with the convenience of cordless freedom. With no compressor, no hose, and no gas cartridge, this cordless framing nailer enables faster set-up and easier maneuvering on the jobsite. The RIDGID 18V Brushless 21° Framing Nailer drives 3 nails per second with no gas cartridges and zero ramp-up time, meaning that there are no delays once the trigger is pulled. To meet all professional needs, the high-strength brushless motor in this framing nailer delivers enough power to sink 2 in. to 3-1/2 in. full round head framing nails into engineered lumber. Brushless Motor Technology delivers more runtime, more power, and longer motor life, and the ability to drive up to 750 nails per charge to keep residential contractors and remodelers focused on the job at hand. Best of all, this tool is 100% compatible with all RIDGID 18V batteries, and with registration, is eligible for the Industry Leading Lifetime Service Agreement, providing FREE seals, FREE pistons, and FREE driver blades - For LIFE. Battery and charger sold separately.
RIDGID introduces the R09895KN 18V Brushless 30° Framing Nailer Kit with 4.0 Ah Battery and 18V Charger. Paired with any RIDGID 18V battery, this framing nailer provides all the power of a pneumatic nailer, but with the convenience of cordless freedom. With no compressor, no hose, and no gas cartridge, this cordless framing nailer enables faster set-up and easier maneuvering on the jobsite. The RIDGID 18V Brushless 30° Framing Nailer drives 3 nails per second with no gas cartridges and zero ramp-up time, meaning that there are no delays once the trigger is pulled. To meet all professional needs, the high-strength brushless motor in this framing nailer delivers enough power to sink 2 in. to 3-1/2 in. clipped head framing nails into engineered lumber. Brushless Motor Technology delivers more runtime, more power, and longer motor life, and the ability to drive up to 750 nails per charge to keep residential contractors and remodelers focused on the job at hand. The included battery and charger are compatible with all RIDGID 18V Tools. Best of all, this tool is 100% compatible with all RIDGID 18V batteries, and with registration, is eligible for the Industry Leading Lifetime Service Agreement, providing FREE seals, FREE pistons, and FREE driver blades - For LIFE.
The 21º Full Round Head 3-1/2" Framing Nailer (model AN924) combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters. The AN924 drives 21º plastic collated framing nails from 2" to 3 1/2" in length and .113 to .148 in diameter. It has a 2-mode selector switch (bump, sequential) for increased convenience. The AN924 has a lightweight design (only 8.3 lbs.) with durability features that include a heat-treated S7 steel driver blade, a solid aluminum top-loading magazine, and a nail lock-out mechanism that protects the tool and work surface from dry-fires. Added features include tool-less depth adjustment for flush or countersink nailing, added tool hook, and an ergonomic rubberized grip.