Steel 3-Shelf Wall Mounted Garage Cabinet in Platinum (17 in W x 11 in H x 19 in D)

A:  Maybe by a locksmith. Pretty sure it’s not an option through Ryobi. I have 2 and they are not keyed alike. 

A:  Hello, Olymama - Thank you for your question. I'm sorry, no. Each shelf will come with its own keys. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the Steel 2-Shelf Wall Mounted Garage Cabinet in Black (17 in W x 11 in H x 19 in D). - Jewel

A:  The lock is fairly common and easily replaceable. Each one has a key code, I imagine you could order the parts, but I doubt ordering by key code is possible. Try a sales rep on the phone...

A:  Hello, Jeffb - Thank you for your question. You can use the clips on the end to attach the middle shelf. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the Steel 3-Shelf Wall Mounted Garage Cabinet in Platinum (17 in W x 11 in H x 19 in D). - Jewel

A:  install a backing plate or 2x4's that span your studs, then install the rack to the plate/studs.

A:  Hello, Didi - Thank you for your question. To mount the cabinet; Locate the wooden studs behind your wall. Using a pencil and a level, mark four screw holes. The top two screw holes should be 16 in. apart on studs. The bottom screw holes should be 10.4 inches below the top screws. Using an AC or DC drill make four pilot holes slightly smaller than the screws. Using a Phillips screwdriver install the screws through each of the pilot holes. Leave the head of the screw approximately 1/4 in. off the wall. Use screws and concrete anchors (provided) when installing the shelving unit into concrete. Use your fingers to press the anchor into the pilot hole. Tap the head of the anchor lightly with the hammer until it is flush with the wall. Then install the screws. With the help of at least one other person, carefully lift the shelving unit and align the keyholes on the back with the screws in the walls. Place the wide portion of each keyhole over the head of each screw. To lock the shelving unit in place, slide the shelving unit down until the screws are inside the narrow portions of each keyhole. Check shelving unit installation by verifying it is level, plumb, and secure to the wall. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the Steel 3-Shelf Wall Mounted Garage Cabinet in Platinum (17 in W x 11 in H x 19 in D). - Jewel

A:  If you have to, install 1X4 from stud to stud, then install unit on 1X4. Or, you’re going to have to use anchors 

A:  I think you need two pieces of 2x4 screw horizontally on the studs one up and the second below where the cabinet screw meet. Then you can install

A:  Haven’t tried that, but it’s made for drills and such, if your looking to hang garden tools suggest looking at the RYOBI Link system! They have a selection that will hang garden tools

A:  Hello, Agart1882 - Thank you for your question. This would depend on the trimmer and blower you have. If the shape of the tools look like they would hang in the slots and they are within the weight limit then it will work. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the Steel 3-Shelf Wall Mounted Garage Cabinet in Platinum (17 in W x 11 in H x 19 in D). - Jewel