Model # 11272

Internet #100124689

Store SKU #367398

Red Head 1/2 in. x 4-1/4 in. Zinc-Plated Steel Hex-Nut-Head Solid Concrete Wedge Anchors (25-Pack)
0092097112728

Red Head

1/2 in. x 4-1/4 in. Zinc-Plated Steel Hex-Nut-Head Solid Concrete Wedge Anchors (25-Pack)

  • Fully threaded for use in many different fixture thicknesses
  • Heavy-duty to ensure confident anchoring
  • Inspectable torque values, indicating proper installation
$21.78 / each
If you buy 2 or more
$18.51 / each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Fully threaded for use in many different fixture thicknesses
  • Heavy-duty to ensure confident anchoring
  • Inspectable torque values, indicating proper installation
The Red Head 1/2 in. x 4-1/4 in. Zinc-Plated Steel Hex-Nut Head Wedge Anchors for Solid Concrete (25-Pack) are a great choice for fastening into solid concrete. The anchors resist corrosion. 1-piece stainless-steel clip. Includes 25 wedge anchors.
  • Ideal for fastening into solid concrete
  • Great for attaching 2 in. x 4 ft. lumber, sill plates and electrical equipment
  • Also good for attaching structural supports to concrete, tilt up construction, highway rails and posts, electrical, HVAC and plumbing systems, metal doors and window frames
  • Corrosion resistant
  • 4-1/4 in. long
  • Zinc-plated
  • Fully threaded design accommodates various fixture thicknesses
  • Heavy-duty construction

Product Overview

  • Fully threaded for use in many different fixture thicknesses
  • Heavy-duty to ensure confident anchoring
  • Inspectable torque values, indicating proper installation
Model #: 11272
Sku #: 367398
Internet #: 100124689

The Red Head 1/2 in. x 4-1/4 in. Zinc-Plated Steel Hex-Nut Head Wedge Anchors for Solid Concrete (25-Pack) are a great choice for fastening into solid concrete. The anchors resist corrosion. 1-piece stainless-steel clip. Includes 25 wedge anchors.

  • Ideal for fastening into solid concrete
  • Great for attaching 2 in. x 4 ft. lumber, sill plates and electrical equipment
  • Also good for attaching structural supports to concrete, tilt up construction, highway rails and posts, electrical, HVAC and plumbing systems, metal doors and window frames
  • Corrosion resistant
  • 4-1/4 in. long
  • Zinc-plated
  • Fully threaded design accommodates various fixture thicknesses
  • Heavy-duty construction

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$12.20 /each
$22.98 /each
$25.20 /each
$25.50 /each
Name 3/8 in. x 2-1/4 in. Zinc-Plated Steel Hex-Nut-Head Solid Concrete Wedge Anchors (15-Pack) 1/2 in. x 4-1/4 in. Zinc-Plated Steel Hex-Nut-Head Solid Concrete Wedge Anchors (25-Pack) 3/8 in. x 3 in. Steel Hex-Nut-Head Wedge Anchors (50-Pack) 3/4 in. x 5-1/2 in. Zinc-Plated Steel Hex-Nut-Head Solid Concrete Wedge Anchors (10-Pack)
Brand Red Head Red Head Red Head Red Head
Ratings (1) (10) (3) (2)
Finish Family Metallic Metallic Metallic Metallic
Fastener/Connector Material Steel Steel Steel Steel
Fastener length (in.) 2.25 4.25 3 5.5
Maximum Weight Capacity (lb.) 0 0 0 0
Package Quantity 15 25 50 10
Fastener Head Style Hex Nut Hex Nut Hex Nut Hex Nut
View Product View Product View Product View Product

Specifications

Dimensions

Fastener Diameter
1/2"
Fastener length (in.)
4.25
Product Depth (in.)
.5
Product Height (in.)
4.25
Product Width (in.)
.5 in

Details

ACQ Rated Fastener
No
Fastener Head Style
Hex Nut
Fastener Plating
Zinc
Fastener Type
Other Anchor
Fastener/Connector Material
Steel
Finish Family
Metallic
Indoor/Outdoor
Indoor
Maximum Weight Capacity (lb.)
0
Measurement Standard
SAE
Package Quantity
25
Primary Use
Concrete fastening applications
Product Weight (lb.)
.26lb
Returnable
90-Day
Usage
Concrete fastening applications
With screw
No

Warranty / Certifications

Manufacturer Warranty
ITW Brands warrants that this product is free from defects in material and workmanship. ITW Brands' sole liability for any breach of this warranty shall be to replace this product or refund the purchase price.

Specifications

Dimensions

Fastener Diameter
1/2"
Fastener length (in.)
4.25
Product Depth (in.)
.5
Product Height (in.)
4.25
Product Width (in.)
.5 in

Details

ACQ Rated Fastener
No
Fastener Head Style
Hex Nut
Fastener Plating
Zinc
Fastener Type
Other Anchor
Fastener/Connector Material
Steel
Finish Family
Metallic
Indoor/Outdoor
Indoor
Maximum Weight Capacity (lb.)
0
Measurement Standard
SAE
Package Quantity
25
Primary Use
Concrete fastening applications
Product Weight (lb.)
.26lb
Returnable
90-Day
Usage
Concrete fastening applications
With screw
No

Warranty / Certifications

Manufacturer Warranty
ITW Brands warrants that this product is free from defects in material and workmanship. ITW Brands' sole liability for any breach of this warranty shall be to replace this product or refund the purchase price.

Questions & Answers

Installation

Would it be recommended to use injectable mortor or an epoxy type filler with these to reinforce the anchor?
Asked by: JRan32
no it is not required, they will hold in the concrete very well by themselves without additional help.
Answered by: JustFrank
Date published: 2016-09-16

Can you buy these 1 or 2 at a time?

Asked by: Grumpy
yes you can, but they may not always be in stock. Also the cost is higher.
Answered by: JustFrank
Date published: 2016-05-13

Can these be used to secure a post base into sonotubes for my low porch? It is only 3-4' off the...

Can these be used to secure a post base into sonotubes for my low porch? It is only 3-4' off the ground, approximately 80 square feet total with 4 posts. I would like to not have to pre-set anchors so that I have some added adjustability when it comes time to install the posts.
Asked by: Jay
use a sleeve anchor instead. There's less chance of blowing out the hole.
Answered by: Will
Date published: 2017-11-08

How deep do I drill the hole for the 4.5" anchor. in 6" concrete.

How deep do I drill the hole for the 4.5" anchor. in 6" concrete.
Asked by: Rocky
Hi Rocky, The hole depth and anchor depth is ultimately dependent on the performance that is needed and the concrete compressive strength. The two hole depths that this product is tested to are 4-1/4" deep (3-3/8" nominal embedment depth + 1/4" for dust to settle) or 2-1/8" (1-7/8" nominal embedment + 1/4"). You can look at our ICC ESR-2251 for the performance values at different embedment depths. Please contact our customer service at (877)489-2726. They are available Monday - Friday from 7am-5pm CST.
Answered by: Paslode
Date published: 2017-01-06
  • y_2018, m_1, d_16, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_, sid_100124689, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 97ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/2 in. x 4-1/4 in. Zinc-Plated Steel Hex-Nut-Head Solid Concrete Wedge Anchors (25-Pack) is rated 4.6 out of 5 by 10.
Rated 2 out of 5 by from Pros: Good Quality Cons: Like all Wedge Anchors, these are not easy to use. Don't do well in "new... Pros: Good Quality Cons: Like all Wedge Anchors, these are not easy to use. Don't do well in "new" concrete and don't expand and grip like they should. I used these in a mix of concrete situations, and they only did well in aged (> 5 year old) slabs. Still, they wouldn't grip as well as as sleeve or expansion anchors. On over half of them that we used on this particular project we wound up using sleeve anchors instead. If you're dealing on older concrete projects these may be for you but I'd suggest other anchor types first.
Date published: 2017-11-08
Rated 5 out of 5 by from The wedge anchors worked better than expected. Bought several boxes... The wedge anchors worked better than expected. Bought several boxes of them and used most of them with no problems
Date published: 2017-12-05
Rated 5 out of 5 by from Did what I needed.... Did what I needed.
Date published: 2017-08-01
Rated 5 out of 5 by from WORKS GREAT WORKS GREAT
Date published: 2017-09-05
Rated 5 out of 5 by from Good Product Quality product, easy to understand instructions, and easy to install. Was worried about damaging the end of the anchor and/or threads by hammering it into the concrete, but the product is very strong. Did not ruin the end or threads and was able to thread and tighten the nut with ease. Just make sure to follow the instructions provided on the box and/or watch a YouTube video and installation is a breeze.
Date published: 2016-01-19
Rated 5 out of 5 by from I would definitely recommend this product works great I would definitely recommend this product works great
Date published: 2017-06-07
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2017-07-13
Rated 4 out of 5 by from worked as expected worked as expected
Date published: 2017-01-24
  • y_2018, m_1, d_16, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_100124689, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 111ms
  • REVIEWS, PRODUCT