Model # RAS-ML-HDCR

Internet #202855917

Store SO SKU #626150

Rev-A-Shelf 5 in. H x 5 in. W x 5 in. D Full Height Base Cabinet Heavy Duty Mixer Lift
0090713039442

Rev-A-Shelf

5 in. H x 5 in. W x 5 in. D Full Height Base Cabinet Heavy Duty Mixer Lift

  • 60 lb. weight capacity lets you easily retrieve small appliances
  • Requires a minimum base cabinet frame opening of 12-1/2 in.
  • 3 adjustable tension settings for heavier items
$ 84 99
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • 60 lb. weight capacity lets you easily retrieve small appliances
  • Requires a minimum base cabinet frame opening of 12-1/2 in.
  • 3 adjustable tension settings for heavier items
Rev-A-Shelf has kept design and flexibility in mind, the heavy duty chrome lift can be attached to any custom made shelf and therefore will fit all full height cabinet sizes allowing a perfect match to your counter top or interior cabinet. Revered as the "best in the industry".
  • (1) Heavy Duty Lift (Assist) System and mounting hardware
  • Does not included soft-close dampener
  • Full height cabinet with 24 in. depth is required to work properly
  • Spring loaded system gently assists the movement of small appliances to counter height
  • 3 tension settings to adjust to heavier items
  • Recommended for 12 in. to 21 in. opening for optimal functionality
  • 60lbs
  • Limited lifetime warranty
  • Shelf is not included

Product Overview

  • 60 lb. weight capacity lets you easily retrieve small appliances
  • Requires a minimum base cabinet frame opening of 12-1/2 in.
  • 3 adjustable tension settings for heavier items
Model #: RAS-ML-HDCR
Internet #: 202855917

Rev-A-Shelf has kept design and flexibility in mind, the heavy duty chrome lift can be attached to any custom made shelf and therefore will fit all full height cabinet sizes allowing a perfect match to your counter top or interior cabinet. Revered as the "best in the industry".

  • (1) Heavy Duty Lift (Assist) System and mounting hardware
  • Does not included soft-close dampener
  • Full height cabinet with 24 in. depth is required to work properly
  • Spring loaded system gently assists the movement of small appliances to counter height
  • 3 tension settings to adjust to heavier items
  • Recommended for 12 in. to 21 in. opening for optimal functionality
  • 60lbs
  • Limited lifetime warranty
  • Shelf is not included

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$53.08
$84.99
$155.45
$166.23
Name Soft Close Kit for a Single Tier Organizer 5 in. H x 5 in. W x 5 in. D Full Height Base Cabinet Heavy Duty Mixer Lift 24 in. H x 3 in. W x 13 in. D Steel Appliance Lift Cabinet Organizer 5 in. H x 5 in. W x 5 in. D Full Height Base Cabinet Soft-Close Heavy Duty Mixer Lift
Brand Rev-A-Shelf Rev-A-Shelf Knape & Vogt Rev-A-Shelf
Ratings (0) (84) (5) (1)
View Product View Product View Product View Product

Specifications

Dimensions

Minimum Cabinet Opening (in.)
12
Product Depth (in.)
5 in
Product Height (in.)
5 in
Product Width (in.)
5 in

Details

Color Family
Silver metallic
Features
No Additional Features
Hub Required
No hub connection available
Included
No Additional Items Included
Kit
No
Kitchen Product Type
Pull-Out Organizers
Material
Steel
Recommended Use
Inside Cabinet
Returnable
90-Day
Slide System
Regular

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime Warranty

Specifications

Dimensions

Minimum Cabinet Opening (in.)
12
Product Depth (in.)
5 in
Product Height (in.)
5 in
Product Width (in.)
5 in

Details

Color Family
Silver metallic
Features
No Additional Features
Hub Required
No hub connection available
Included
No Additional Items Included
Kit
No
Kitchen Product Type
Pull-Out Organizers
Material
Steel
Recommended Use
Inside Cabinet
Returnable
90-Day
Slide System
Regular

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime Warranty

Questions & Answers

Can this be used with a cabinet that has a drawer above the compartment that you will mount it? C...

Can this be used with a cabinet that has a drawer above the compartment that you will mount it? Can it lift to counter hight with a drawer above the unit?
Asked by: David
My no drawer cupboard opening is 28 inches, I mounted down 3 inches from top and there is 3 inches below mechanism so I think you need at least 22 inches from top to bottom to allow full travel. When extended with a 3/4 inch platform I manufactured, the mixer bottom is 3 inches above mount so if you mounted the unit at highest possible it would not be at counter height but depending on mixer height you might be able to add to platform thickness, I think I could add three layers making it approximately 5 inches above top mounting. All figures are approximate but the good news is if it doesn't work Home Depot is really good about taking things back
Answered by: Jerry
Date published: 2019-02-06

Can the mixer be operated on this shelf?

Asked by: Rita
Yes. This lift devise is very sturdy. I suggest you place a piece of 1/2" plywood on each side of the cabinet to strengthen the cabinet and to provide additional clearance for the arms that swing up ward when the storage shelf is lifted into its position for using the mixer. I*f you have further questions please feel free to contact me at john@concinnitybooks.com.
Answered by: John
Date published: 2018-10-26

when you says box, does that mean this whole unit is in a framed box that can be just slid into a...

when you says box, does that mean this whole unit is in a framed box that can be just slid into an opening? If not do you have such a unit?
Asked by: Sue
No, they are 2 separate arms, they have to be screwed to either sides of the cabinet.
Answered by: Zounder
Date published: 2018-01-06

Can the lift mechanism be installed in a frameless cabinet with 3/4" plywood sides and a 10.5" op...

Can the lift mechanism be installed in a frameless cabinet with 3/4" plywood sides and a 10.5" opening?
Asked by: Patsy
Yes..installation is recessed from front edge of opening and since you supply the shelf you can make it to 10.5"
Answered by: Kgibb
Date published: 2018-10-15
  • y_2019, m_2, d_19, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_49
  • loc_, sid_202855917, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • QUESTIONS, PRODUCT

Customer Reviews

5 in. H x 5 in. W x 5 in. D Full Height Base Cabinet Heavy Duty Mixer Lift is rated 4.5 out of 5 by 84.
Rated 5 out of 5 by from Works very well for me. Installation was not complicated.... Works very well for me. Installation was not complicated. My cabinets were designed for this with no drawer at the top. I had plenty of clearance. You should check your opening width as well as height you can download the installation instruction from Home Depot web site and get the depth, height, and width requirement. This device is constructed of high quality material and is heavy duty. The two springs that operate this are very strong, almost a two person job to adjust if you need to. I used Half inch plywood 6 inches x 21 inches as a spacer to bring out side of the Face Framing and for the shelf for the mixer I use 3/4 inch pine board 11 1/2 inches wide by 18 inches in Length. Your measurements will be according to the opening and depth.
Date published: 2018-12-18
Rated 5 out of 5 by from The Rev-A-Shelf was just as I expected. Very good... The Rev-A-Shelf was just as I expected. Very good quality with good instructions for installation. Sadly, I was unable to actually use it as my cabinet was just too small for what I was hoping to do. I had a 15" cabinet with a 12" opening for my Kitchen-Aid mixer and realized once I had the Rev-A-Shelf and the instructions that I needed a minimum of a 16"-18" cabinet for the mixer (11¼" wide) with the arms of the Rev-A-Shelf to actually fit. A 13" opening would have been tight, but would work, so the 15" cabinet with 12" opening was just too small.
Date published: 2019-01-02
Rated 5 out of 5 by from Fantasic product I bought this lift system for my Kitchen Aid stand mixer. I have the professional series, which is heavier and taller than average. The lift system seems to handle the extra weight and height with no problems, and we even had enough space in the cabinet underneath the mechanism to install a drawer for measuring cups, rolling pins, etc. (not shown in pic). The mechanism itself is very easy to use, and the handles are very easy to grasp and hold onto. The installation only took about 20 minutes (not including measuring and planning), and my husband had no problem adjusting the tension to accommodate the larger mixer. We used two pieces of 3/4 inch plywood for the top and just edged it with some leftover trim from another project. No complaints so far, owned and used a little over a month.
Date published: 2015-08-26
Rated 5 out of 5 by from Works very easy. I love the way it lifts my... Works very easy. I love the way it lifts my mixer which is very heavy. Would recommend it.
Date published: 2019-01-31
Rated 5 out of 5 by from Well-built Had something similar installed by a contractor way back when, and when we purchased a new home, I insisted on doing it again (you really get used to the convenience of not having to move your mixer around). Luckily, this one was available for purchase, and we were able to install it ourselves. I would get frustrated with the old one, as it would stick in the "out" position most times. This one has pull latches to release the mechanism, and it seems to work great. It also has tension adjustments, so if you have a really heavy mixer, it should be sturdy enough to support it. We also installed an electrical outlet in the bottom of the cabinet, so the mixer can stay plugged in. Huge help.
Date published: 2014-04-29
Rated 5 out of 5 by from just what we needed Contractor figured out how to install, although directions were skimpy. Once done, the device works perfectly with our very heavy stand mixer which was getting no use because it was such trouble to move it into position from its storage location. No super strength is needed to bring the platform up or put it back down. We lost the space for a recycle bin, but it's worth it for the convenience.
Date published: 2013-04-16
Rated 3 out of 5 by from Must have full height cabinet to fit I tried installing this in a cabinet that had a drawer above it. Unfortunately the description did not say that you need a full size cabinet in order for this to work. I am going to try to remove the drawer above it and just have a false drawer front and hopefully that will work. I would only recommend this if you have a cabinet that will fit it.
Date published: 2013-12-17
Rated 4 out of 5 by from Works great, Tight fit in 12 inch cabinet I'm a contractor, and do things like this as part of my profession. The product works as described. It's heavy duty, and sturdy. It lifts the Kitchenaid Stand mixer smoothly and solidly. The spring tension is adjustable, but it came set appropriately for my appliance. The screws that come with the unit should be thrown away. I gently screwed them in, being careful not to strip them (or strip the wood), and snapped two heads off before I even realized it. (It's hard to fathom how the manufacturer feels the need to skimp on screws, yielding a savings of what, maybe twenty cents? However, I often run into poor quality screws on many purchases.) The documentation is also skimpy. There is a lot if information given, but I found it confusing in the sense it did not tell me what I wanted to know (at least I didn't find it). We wanted to mount the appliance under the cabinet drawer, and the documentation didn't make the max and min height apparent (when the lift is extended, and tucked away). We found out after mounting it that it wouldn't fit. When mounted so the lift came up under the drawer, it hit the bottom of the cabinet. Our cabinet had a horizontal bar between the door and drawer opening (called a style). We removed the drawer. We also found out the hard way that a 12 inch cabinet is barely large enough for a Kitchenaid Stand mixer. The base of the mixer is nearly 10 inches wide, and the workings of the lift mechanism (springs, hinges, arms, latches, etc) make the arms protrude nearly an inch into the cabinet on either side. We had to modify the cabinet by widening the face frame opening. We also could not use the plywood side supports, which I believe are actually spacers (again, the documentation didn't seem to make that clear). For a Kitchenaid Stand mixer (or any appliance with a 9-7/8" wide base) application, I believe mounting the lift in a 12" frameless cabinet, or a wider cabinet would be straight forward. You must make your own shelf to support the appliance, since this lift can be mounted in an assortment of cabinet (different widths). You'll also need a number of screws to attach the shelf to the lift (I used #8 by 1/2 for my 3/4" pine shelf). I also put a pull out tray on the bottom of the cabinet, but the appliance lift has ears, which stick down on either side which come within an inch or so of the tray. The clearance in the center is about 5 inches, so the client has to center things in the tray for clearance, which is not a big deal. The lift looks and works great, as does the cabinet. I have pix, but was unable to upload them (and I have Verizon. : ) )
Date published: 2015-01-20
  • y_2019, m_2, d_19, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_84
  • loc_, sid_202855917, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 173ms
  • REVIEWS, PRODUCT