Thank you for asking. Yes, that will fit both top and bottom element on your model.
Thank you for asking, Mikey. Unfortunately, we do not design or manufacture 'Fast Recovery Elements'. If you have any further questions, please contact us at 1-866-279-4566. Thank you and have a great day.
Yes the tank must be drained, at least below the element that is removed.
Yes, this element will fit in the model you have listed.
The size of the hex head is 1-7/8.
Granted that the element length, wattage and voltage are the same i do not see why this would be a problem, However, We aren't sure that the mounting system on Kenmore products is the same, We would recommend reaching out to Kenmore at 1-800-549-4505, They might be better suited to answer this for you.
Yes, these parts are available for purchase from our Parts Department... Please contact 1-800-621-5622, option 3 from 8:30 am est, to 6:00 pm est.
Will fit both positions HOWEVER, usually the top element is internally FUSED so you don't burn up the unit, wiring, etc if you turn on the power with the tank empty - IF YOU MAKE SURE THE TANK IS FULL before turning on the power you'll be fine
Yes. That will work with that unit.