#1 Home Improvement Retailer

Internet #100144842

Model #2057-1

Store SKU #566620

Store SO SKU #1001605294

1 Gal. Vinyl Composition Tile Floor Adhesive

$1597
  • Superior grade vinyl composition tile adhesive with great grab
  • Can be used to install vinyl composition and vinyl asphalt tile
  • Environmentally safe tile adhesive with 24 hours dry time
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Product Overview

ROBERTS 2057 Vinyl Composition Tile (VCT) Adhesive is a clear, solvent-free, water-based, thin-spread tile adhesive that provides excellent grab and high residual tack. This superior grade tile adhesive brushes, rolls or trowels on and helps hold tiles firmly in place, even when subjected to repeated cleaning and mopping. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes.
  • For adhering vinyl composition tile (excluding self-stick), including tile-over-tile installation
  • Bonds with concrete, APA rated plywood, one layer of existing and finish free VCT, aged cutback adhesive residue, primed gypcrete (refer to ASTM F2419) and terrazzo
  • Ideal for direct bond and double bond installation
  • Moisture Control Adhesive - up to 8 lbs. MVER and 85% RH
  • Thin-spread adhesive dries clear in up to 24 hours with the restriction of foot traffic and moving heavy objects
  • Approximately 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel and 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • Enviro-friendly, solvent-free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • CRI Green Label Plus Certified - GLP no. 3647
  • 15 year moisture control, 15 year direct bond, 7 year double bond limited warranty
  • Do not expose freshly applied adhesive to water for 4 days or to standing water for 4 weeks

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Vinyl Adhesives

1 Qt. Vinyl Composition Tile Floor Adhesive
current product
1 Gal. Vinyl Composition Tile Floor Adhesive
430 1 Qt. ClearPro VCT Adhesive2001 1 Gal. Felt-Backed Sheet Vinyl Flooring Adhesive
BrandRobertsRobertsHenryRoberts
Name1 Qt. Vinyl Composition Tile Floor Adhesive1 Gal. Vinyl Composition Tile Floor Adhesive430 1 Qt. ClearPro VCT Adhesive2001 1 Gal. Felt-Backed Sheet Vinyl Flooring Adhesive
Price
$897
$1397
$1517
$1766
Ratings
(698)
(698)
(11)
(204)
Maximum coverage area (sq. ft.)4730080190
Flooring Material FeaturesLatex based,Solvent freeLatex based,Solvent freeLatex based,Solvent free,Water basedLatex based,Solvent free
Flooring TypeVinylVinylVinylVinyl
Dry time (hours)24242424
LocationFloorFloorFloorFloor
Product Weight (lb.)1.97.9210
View ProductView ProductView ProductView Product

Specifications

Dimensions

Container size (qt.)
4
Maximum coverage area (sq. ft.)
300
Product Width (in.)
7.75

Details

Adhesive Type
Vinyl
Color Family
Beige
Commercial / Residential
Commercial / Residential
Dry time (hours)
24
Flooring Material Features
Latex based,Solvent free
Flooring Product Type
Vinyl Adhesive
Flooring Type
Vinyl
Indoor/Outdoor
Indoor
Location
Floor
Product Weight (lb.)
7.9
Returnable
90-Day

Warranty / Certifications

Lifetime Warranty
No
Manufacturer Warranty
To be free from manufacturing defects

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.1
    out of 698 reviews
  • 76%recommend this product
Filter by:
Showing 1-10 of 698 reviews
2057 floor glue
Works great on vinyl plank flooring
by
  • Verified Purchase
it did not hold down my tile...
it did not hold down my tile
by
  • Verified Purchase
Good thick paste
I used this paste to install my vinyl floors. It is very sticky and thick, it can be hard to maneuver it you don’t get enough paste at a time or until you get the hang of it. My floors are still strong, it’s going on 2 years.
by
    • Recommended
    I don't like the stickiness of it.... it was supposed...
    I don't like the stickiness of it.... it was supposed to be a clear dry adhesive for the tiles. Instead it by the Yello ruins the white marble tile that I bought can you replace this?
    by
      Horrible product
      I have laid my share of VCT tile over the years and have always used a 3/16 x 5/32 trowel to lay out my adhesive. I don't know if I simply got a bad batch but this product TOOK FOREVER to set up to a point where I could work with it. After waiting over 100 mins (YES 100 MINUTES) after laying it out I was still unable to lay my product without the tiles sliding around. I even had direct air current flowing over the work area and it was the middle of the summer so it wasn't cold outside. Very frustrating to be forced to wait 3-4 hours before you can begin to lay out your product. While my trowel is slightly larger then what is recommended I laid out the adhesive very thin and to no avail. Adhesive like this typical develops a skin after setting for a hour and at that point you can start laying your material. Make sure and plan a entire day for your job when using this adhesive since you'll be waiting half the day for this stuff to cure up to become workable.
      by
      Response from The ManufacturerAug 2, 2021
      Roberts understands installing a new VCT floor can be challenging. Here are some key product usage points regarding the 2057 this thin spread VCT adhesive product that may improve performance and satisfaction. The largest trowel size recommended for use during installation is a 1/16" square notch (over porous substrate). A smaller notched trowel is recommended over non porous substrates. Ensure adhesive trowel ridges are well defined. When excessive adhesive is used, longer than usual open time should be expected. Always allow the adhesive to dry to a full tack (no transfer to fingertip) and a transparent color prior to installing the tiles. Once flooring is installed, roll the flooring with a weighted roller in both directions to secure the tiles into the adhesive field. - Customer Care QEP
        2 found this review helpful
        Rating provided by a verified purchaser...
        Rating provided by a verified purchaser
        by
        • Verified Purchase
        I simply loved using this pre mixed grout. It was...
        I simply loved using this pre mixed grout. It was so easy to apply and made my work as a first time DIY tile installer, look very professional. It closed in the gaps that I thought I would have to move toilets or cabinets to achieved. Very pleased with it.
        by
        • Verified Purchase
        Sticks well! Both the tile and my fingers stuck well together. Less is more on this product so ...
        Sticks well! Both the tile and my fingers stuck well together. Less is more on this product so as you push down you wont have to clean excess from the seam lines which will get sticky fingers. Tile is holding well as it should.
        by
        • Verified Purchase
        • Recommended
        1 found this review helpful
        Works great with self sticking tiles. Help stick better!!
        Works great with self sticking tiles. Help stick better!!
        by
        • Verified Purchase
        • Recommended
        4 found this review helpful
        Wish this product would dry a little quicker other than that is a pretty good product
        Wish this product would dry a little quicker other than that is a pretty good product
        by
        • Verified Purchase
        • Recommended
        Showing 1-10 of 698 reviews