Internet #100574635

Model #2001-0

Store SKU #904684

Store SO SKU #1001371212

2001 1 Qt. Felt-Backed Sheet Vinyl Flooring Adhesive

  • Developed specifically for felt-backed sheet vinyl
  • Compatible with a variety of substrates
  • Up to 48 hour curing time
  • See More Details
$622

Frequently Bought Together

+
+
Price:
$622

Product Overview

ROBERTS 2001 is a superior, commercial-grade, felt-backed sheet vinyl adhesive. This adhesive was developed with the optimum open time and working time for the positioning of felt-backed sheet vinyl flooring. This adhesive is for residential and moderate commercial traffic and has a lifetime non-staining warranty.
  • For adhering mineral fibrous felt-backed sheet vinyl
  • Bonds with concrete, APA rated plywood, vinyl composition tile (free of wax), non-cushioned felt-backed sheet vinyl (free of wax and embossing leveler), primed gypcrete (ASTM F2419) and terrazzo
  • For interior installation only
  • Moisture Control Adhesive - up to 5 lbs. MVER and 80% RH
  • Up to 25 minutes open time and 24 to 48 hour curing time
  • Approximately 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel and 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square notch trowel
  • Approximately 220 to 240 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/32 in. x 1/32 in. U-notch trowel
  • Enviro-friendly, solvent-free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • CRI Green Label Plus Certified - GLP no. 36471
  • Non-flammable for safe use
  • 10 year direct bond, lifetime non-staining limited warranty
  • High temperature and low humidity will cause the adhesive to cure faster while premature traffic can cause installation failure
  • Do not use this adhesive for pure/luxury vinyl or vinyl-backed products

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Vinyl Adhesives

440 11 oz. Cove Base Adhesive
current product
2001 1 Qt. Felt-Backed Sheet Vinyl Flooring Adhesive
1 Qt. Vinyl Composition Tile Floor Adhesive430 1 Qt. ClearPro VCT Adhesive
BrandHenryRobertsRobertsHenry
Name440 11 oz. Cove Base Adhesive2001 1 Qt. Felt-Backed Sheet Vinyl Flooring Adhesive1 Qt. Vinyl Composition Tile Floor Adhesive430 1 Qt. ClearPro VCT Adhesive
Price
$576
$622
$798
$1082
Ratings
(3)
(173)
(497)
(6)
Maximum coverage area (sq. ft.)7484780
Flooring Material FeaturesLatex based,Solvent free,Water basedLatex based,Solvent freeLatex based,Solvent freeLatex based,Solvent free,Water based
LocationFloor,Interior wallFloorFloorFloor
View ProductView ProductView ProductView Product

Specifications

Dimensions

Container size (qt.)
1
Maximum coverage area (sq. ft.)
48
Product Width (in.)
5

Details

Adhesive Type
Vinyl
Color Family
Beige
Commercial / Residential
Commercial / Residential
Dry time (hours)
24
Flooring Material Features
Latex based,Solvent free
Flooring Product Type
Vinyl Adhesive
Flooring Type
Vinyl
Indoor/Outdoor
Indoor
Location
Floor
Product Weight (lb.)
2.6
Returnable
180-Day

Warranty / Certifications

Lifetime Warranty
No
Manufacturer Warranty
To be free from manufacturing defects

Questions & Answers

49Questions14Answers

Does this glue have a expiration date

Asked by ULAM April 26, 2020
1
Answer

Yes,Roberts will warrant that this product will be free from manufacturing defects for 12 months from the date of manufacture in original unopened container. The adhesive available in 4 and 1 gallon products will have a date code sticker located on the lid.

Will this hold rubber to wood

Asked by TB April 24, 2020
1
Answer

No, 2001 is specific to felt back sheet vinyl. You may want to consider Roberts 1509 to adhere rubber flooring or mats to concrete or plywood substrates. (indoors/controlled environments) per flooring manufacturer's adhesive recommendations

Would this be the best option for adhering rubber mats permanently to a wood surface?

Asked by Sarah April 20, 2020
1
Answer

No, 2310 is specific to felt back sheet goods. Always follow the rubber manufacturer's specific adhesive recommendation. Roberts adhesive that support rubber mat adhesion is 1509 urethane adhesive and Max Grip double sided tape. (Model # 50-550)

Can hybrid be used to glue down flooring to pressure treated plywood?

Asked by Sean April 20, 2020
1
Answer

No,pressure treated plywood is not a recommended / warranted substrate. Indoor subflooor grade APA rated plywood is recommended.

Can this product be used on marine grade plywood. We are building a fully enclosed hot tub gazebo. Sheet vinyl Floor.

Asked by ZoomOn43 October 15, 2019
2
Answers

Thank you for your inquiry. No, 2001 is warranted over APA interior grade plywood.

Can this be used to apply directly on linoleum to apply subway tile for a backsplash? Want to app...

Asked by polardiy September 13, 2019
2
Answers

not happy with the dry time or adhesiveness.

Can this be used to lay new vinyl sheet flooring over and existing vinyl sheet floor without remo...

Asked by diplexer July 13, 2019
2
Answers

Thank you for you inquiry. ROBERTS 2001 is a superior, commercial-grade, felt-backed sheet vinyl adhesive. Always confirm the type of sheet vinyl being installed. Do not use this adhesive for pure/luxury vinyl, Fiberglas sheet vinyl or vinyl-backed products. This adhesive may be used over the following Substrates: Concrete, APA rated plywood, vinyl composition tile (free of wax), non-cushioned felt-backed sheet vinyl (free of wax and embossing leveler) Over non porous substrates such as existing sheet and VCT maximum Open time of 25-35 minutes should be observed to ensure an appropriate cure is achieved.

Can this product be used for adhering vinyl felt back planks to a vertical wall in the bathroom.

Asked by kipster January 16, 2019
1
Answer

Thank you for your inquiry. No, 2001 adhesive is specifically designed for adhering felt back sheet vinyl to a horizontal concrete or plywood surface. Always contact the flooring manufacturer for specific vertical application techniques and recommendations.

I want to use roofing felt as a tile underlayment. Can I use this to glue it down?

Asked by Dj December 23, 2018
1
Answer

Thank you for your inquiry. No, this is not the recommended use of this product. Feel free to contact Technical services for alternative installation products and instructions 706-277-5294 x6025

How to remove this from carpet

Asked by Hallie December 12, 2018
2
Answers

If it's dried? You probably won't get it out. Mineral spirits or other petroleum based solvent. Always important to review the uses and directions from the manufacturer. This doesn't work on all laminates. It does not work well with premium laminate. Carpet? Perhaps the rubber backed stuff, but not regular carpet. It has probably destroyed your carpet.

2001 1 Qt. Felt-Backed Sheet Vinyl Flooring Adhesive - page 2

Customer Reviews

  • 173 Customer Reviews
  • 4.5 out of 5 stars overall
95% of customers recommended.
Overall Ratings
5star-icon(112)
4star-icon(42)
3star-icon(11)
2star-icon(2)
1star-icon(6)
Sort By:
God product easy to use
God product easy to use
Was this helpful?
0
0
I wanted to put sticky backed vinyl flooring on the wall of a garage behind a utility sink. This ...
I wanted to put sticky backed vinyl flooring on the wall of a garage behind a utility sink. This allowed me to accomplish my goal. Very easy to use.
Was this helpful?
0
0
I used this in my laundry room. It is between osb and a vinyl roll flooring. Easy to use and works.
I used this in my laundry room. It is between osb and a vinyl roll flooring. Easy to use and works.
Was this helpful?
0
0
Easy to work with and excellent results! I'm more than happy with my latest home improvement proj...
Easy to work with and excellent results! I'm more than happy with my latest home improvement project so far!
Was this helpful?
0
0
I needed some glue for Allure planks to be used in a big dollhouse with MDF floor. This glue do t...
I needed some glue for Allure planks to be used in a big dollhouse with MDF floor. This glue do the job. Very messy but you can cleaning it with a damp sponge with some soap while you're working . Very slow drying time, but good to repositioning my miniature planks made of the big Allure ones. The planks I glued last night are very firm and you can't lift any of them after glue dry out. Very good stuff.
Was this helpful?
0
0
Tampa, FL
Vinyl flooring adhesive worked perfectly
Appearance :
5
Ease of installation :
5
Quality :
5
Value :
2
This adhesive was easy to spread and has held the floor in place beautifully even though we have moved a washer and dryer around on it. Only complaint was that there wasn't a smaller size. We have a ton left over.
Was this helpful?
2
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers