- For interior carpet installation
- Compatible with a variety of substrates
- Up to 48 hours curing time
- See More Details
Frequently Bought Together
Product Overview
- Adheres carpet with most backings, including polypropylene (ActionBac), woven, Axminster, Wilton, hot melt, unitary, needle-punch (non-woven/needle-bond), urethane foam (Enhancer), polyurethane laminate (LifeSpan), sponge-rubber, jute and latex-foam
- Bonds with concrete, underlayment grade APA rated plywood, vinyl composition tile (free of wax) and terrazzo
- For interior, heavy commercial traffic installations
- May be used for direct and double bond installations
- Moisture Control Adhesive - up to 10 lbs. MVER and 90% RH
- Up to 20 minutes open time, 40 minutes working time and 24 to 48 hours curing time
- Approximately 65 to 110 sq. ft. per gallon coverage for polypropylene/woven carpet and 100 to 200 sq. ft. per gallon coverage for non-woven/closed cell/Enhancer carpet installations
- Suggested for use with a 1/8 in. x 1/8 in. x 1/8 in. U-notch trowel, 1/8 in. x 1/8 in. x 1/16 in. V-notch trowel, or 3/32 in. x 3/32 in. x 3/32 in. V-notch trowel depending on carpet installation type
- Enviro-friendly, solvent-free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
- Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
- CRI Green Label Plus Certified - GLP no. 36471
- Non-flammable, NFPA Class A and UBC Class 1 fire resistance ratings (ASTM E84)
- 15 year moisture control, 15 year direct bond and 7 year double bond limited warranty
- Not for use with pure vinyl or vinyl-backed carpet
Product Overview
- For interior carpet installation
- Compatible with a variety of substrates
- Up to 48 hours curing time
Specifications
Dimensions
Details
Warranty / Certifications
Questions & Answers
Is it able to hang light weight carpet on the wall?
Asked by Medusa November 27, 2020Roberts does not recommended or warrant this adhesive for wall applications. However, it is used for this purpose with great success. Always follow install guidelines for best performance.
will this work if it is put on top of carpet padding to hold a foam flooring?
Asked by Kathi November 13, 2020No, this is not a recommended use of Roberts 3095 carpet adhesive.
Will this product work to glue down a carpet runner on a stone floor? Can it be removed from the ...
Asked by Broncomom November 12, 2020This will glue a runner down to a stone floor. For that matter it will glue a runner down to just about anthing you want...PERMANANTLY. It is very sticky as it cures and eventually cures hard.
How many square feet covered 4 gal
Asked by David August 2, 2020Approximate coverage rates per gallon listed below: 1/8" x 1/8" x 1/8" U notch trowel Coverage: 65-75 ft2 per gallon 1/8" x 1/8" x 1/16" flat top V notch trowel Coverage: 90-110 ft2 per gallon 3/32" x 3/32" x 3/32" flat top V notch trowel Coverage: 100-200 ft2 per gallon
Can this be used outdoor on smooth concrete surface?
Asked by Al July 17, 2020Yes you can, this carpet are really sticking to anything, but if you use it in thin materials do not put a lot of this adhesive because it will go through the other side and its not easy to clean it out.
Will this adhere to metal?
Asked by Jh2o July 8, 2020Roberts 3095 is warranted to be used in a climate controlled environments. Recommended/Warranted Substrates:Concrete, underlayment grade APA rated plywood, vinyl composition tile(free of wax) and terrazzo. You may want to consider automotive grade adhesive.
Is this NON water based? That's what we need.
Asked by Maureen June 5, 2020Roberts 3095 is a Latex based ( Waterborne) product. If you would like more information about Roberts products contact technical service at 706-277-5294 x 6025
Hi. can i use it on plaster board on my wall
Asked by MEHRAN May 3, 2020Roberts 3095 is specifically warranted for flooring (horizontal) installations however people have used this adhesive for wall (vertical) applications with great success. You may need to prime the plaster board with an acrylic primer to ensure consistent bond to the plaster board substrate.
Can this be used between 2 layers of drywall as an alternative to greenglue?
Asked by Anthony April 26, 2020Yes, the 3095 adhesive has been used successfully and regularly as an alternative for this purpose.
Can this be thinned?
Asked by Brandon September 16, 2019Thank you for your inquiry. No, thinning the 3095 product may cause bond performance issues and/or installation failure.
Customer Reviews
Related Products
