Internet #205611390

Model # RK7323

0845534012149

Blade Runner X2 Portable Tabletop Saw

  • Designed for unlimited capacity for cross and rip cuts
  • Switch between standard t-shank jigsaw blades in 3 seconds
  • Compact, lightweight cuts wood, tile, plastic, metal and aluminum
$ 139 99

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Designed for unlimited capacity for cross and rip cuts
  • Switch between standard t-shank jigsaw blades in 3 seconds
  • Compact, lightweight cuts wood, tile, plastic, metal and aluminum
The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • Safety switch with key prevents accidental start















  • Click here for more information on Electronic Recycling Programs
  • California residents see Prop 65 WARNINGS

Product Overview

  • Designed for unlimited capacity for cross and rip cuts
  • Switch between standard t-shank jigsaw blades in 3 seconds
  • Compact, lightweight cuts wood, tile, plastic, metal and aluminum
Model #: RK7323
Internet #: 205611390

The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • Safety switch with key prevents accidental start















  • Click here for more information on Electronic Recycling Programs
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Blade Diameter
4
Maximum Cut Depth @ 90 Deg.
0
Product Depth (in.)
16.10
Product Height (in.)
8.30
Product Width (in.)
17.50
Work Table Surface
in. x in.

Details

Amperage (amps)
5.5
Bench & Stationary Tool Type
Table Saw
Blade Diameter (in.)
4
Blade Location
Centered
Blade Speed
3000.000
Color Family
Gray
Condition
New
Construction Material
Acrylonitrile Butadiene Styrene (ABS)
Cord Length (ft.)
4
Corded Tool Type
Specialty Saw
Cordless/ Corded
Corded
Cuts Through
Aluminum,PVC,Plastic,Porcelain,Wood
Depth Control
No
Horsepower (hp)
0
Included Accessories
Blades,Miter Fence,Rip Fence
Maximum Cut Depth @ 45 Deg.
0
PT Horsepower (Hp)
2
Power Tool Features
Blade Guard System,No Tool Blade Change
Product Weight (lb.)
14.7lb
Returnable
180-Day
Rip Capacity - Left
0
Rip Capacity - Right
6
Table Tilt Left Max (degrees)
0
Table Tilt Right Max (degrees)
0
Tools Product Type
Power Tool

Warranty / Certifications

Certifications and Listings
ETL Listed
Manufacturer Warranty
3 years limited

Specifications

Dimensions

Blade Diameter
4
Maximum Cut Depth @ 90 Deg.
0
Product Depth (in.)
16.10
Product Height (in.)
8.30
Product Width (in.)
17.50
Work Table Surface
in. x in.

Details

Amperage (amps)
5.5
Bench & Stationary Tool Type
Table Saw
Blade Diameter (in.)
4
Blade Location
Centered
Blade Speed
3000.000
Color Family
Gray
Condition
New
Construction Material
Acrylonitrile Butadiene Styrene (ABS)
Cord Length (ft.)
4
Corded Tool Type
Specialty Saw
Cordless/ Corded
Corded
Cuts Through
Aluminum,PVC,Plastic,Porcelain,Wood
Depth Control
No
Horsepower (hp)
0
Included Accessories
Blades,Miter Fence,Rip Fence
Maximum Cut Depth @ 45 Deg.
0
PT Horsepower (Hp)
2
Power Tool Features
Blade Guard System,No Tool Blade Change
Product Weight (lb.)
14.7lb
Returnable
180-Day
Rip Capacity - Left
0
Rip Capacity - Right
6
Table Tilt Left Max (degrees)
0
Table Tilt Right Max (degrees)
0
Tools Product Type
Power Tool

Warranty / Certifications

Certifications and Listings
ETL Listed
Manufacturer Warranty
3 years limited

Questions & Answers

Does the table tilt, and if so, does it tilt both right and left?

Does the table tilt, and if so, does it tilt both right and left?
Asked by: Skeeter
Neither the table nor the blade tilt. They are fixed at 90 degrees to each other.
Answered by: Dan
Date published: 2019-09-02

How loud is it?

Asked by: Zjh
Not very loud at all. If cutting metal, you may get a little screeching if the blade is worn, but normal use it's very quiet. I use a 5 gal shop vac with it and the vac is louder, by far.
Answered by: KAC
Date published: 2019-02-20

Will it cut smooth cuts with our tearing up the wood

Asked by: Mmw
You will have to use the PROPER blade in order to get a nice finished cut. You need a blade with a lot of teeth / inch, and you need to carefully run the material through your saw, keeping mind of the sound of the motor (saw). The sound of the saw will keep you aware of how hard the motor is working. e.g. Don't force the work through, causing binding, smoke, and maybe bending or even breaking the blade. (Consult the information that came with your blades regarding cutting across the grain, or with the grain). Finally, if you're cutting plywood, expect some tearing-out of the wood. A little more when crosscutting (across the grain). The addition of good duct tape on the bottom-side of the wood helps tear-out. And if your blade has been specifically designed to cut on the down-stroke, then you need the duct tape on the top of the wood. It's much easier to use this kind of blade because your cut-line is right on top of the work, on top of the tape...
Answered by: BA
Date published: 2020-04-09

Can I cut different shapes and Welcome signs

Asked by: Lindsey
Yes, you can, but you are limited by the distance between the blade and the guide. So it will work with smaller pieces but i would think a jig saw would be more practical.
Answered by: Roverman
Date published: 2019-01-17
  • y_2020, m_9, d_19, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_107
  • loc_, sid_205611390, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms
  • QUESTIONS, PRODUCT