A: Very light
A: VERY LIGHT I WOULD GUESS LESS THAN ONE LB.
A: weight per piece is .52 lbs.
A: The product is 100% PVC.
A: It saws like wood and I had no issues with it.
A: It is made of PVC. I have not try any solvent on it
A: This can be used as a moulding to hide a gap between a wall covering and the ceiling as long as the gap is fairly small - say less than 1/4 inch.
A: Yes, it can be used as a shoe, base, ceiling, or corner trim. I have used it all of these ways, including a variant that I used for an outside corner. Great Stuff.
A: This molding could be used to cover the gaps between your paneling and your ceiling as long as none of the gaps are more than about one half inch. The smaller the gap, the better it would work and the easier it will be to install.
A: Funny that you would ask that, as I have used it for that very purpose several times, it looks nice. It is easy to install with a pin nailer and much stronger than the alternatives unless you are using solid woods. I also have used it vertically in corners. Mostly I use it when I lay laminate floors, sometimes alone other times as a shoe. When there are white baseboards, it usually matches well, if not then I paint it before installing. Then I putty the holes and touch up the paint, once installed. It takes and holds paint very well. Also, it costs a fraction of the low-quality, often particle board with thin vinyl coverings, products made to match laminates. This is much more durable and the cut ends are the same color as the surface. When I paint it the color of the wall, it makes the wall look taller.
A: None at all, but most people want something a little bit more decorative.
A: This moulding does a good job of covering gaps where paneling meets the ceiling as long as thegaps are no wider than 1/2".
|Brand||Royal Mouldings||Royal Mouldings||Royal Mouldings||Royal Mouldings|
|Name||6577 11/16 in. x 11/16in. x 8 ft. PVC Composite White Outside Corner Molding||5093 - 0.75 in. D x 0.75 in. W x 96 in. PVC Composite Inside Corner Molding||12 ft. x 3/4 in. x 3/4 in. Vinyl Composite Inside Corner Molding||1.125 in. D x 1.125 in. W x 8 ft. PVC Composite White Outside Corner Molding|
|Moulding Type||Outside Corner Moulding||Inside Corner Moulding||Inside Corner Moulding||Outside Corner Moulding|
|Moulding Features||Moisture Resistant,Rot Resistant,Termite Resistant||Moisture Resistant,Rot Resistant,Termite Resistant||Moisture Resistant,Rot Resistant,Termite Resistant||Moisture Resistant,Rot Resistant,Termite Resistant|
|View Product||View Product||View Product||View Product|