If there is going to be a lot walking and also wet floor at times it may not be a good idea to use this product. I painted my garage floor about a year ago and it looked great but after about 15-18 months the most traffic areas need to be repainted. By the way, we normally do not park the cars their just the lawn mower on one side. If you decide to go with this product i recommend you get some of those hard rubbers mats. Good luck with your project.
Our 1 gal. Armor Gray Concrete Floor Paint is a smooth finish coating, it does not have anti-slip properties. We recommend mixing our Anti-Skid Additive to the coating prior to application to create an anti-skid finish: http://www.homedepot.com/p/Rust-Oleum-8-oz-Anti-Skid-Additive-301244/206495776
We do not recommend applying a 2 part epoxy clear finish over Rust-Oleum Concrete and Garage Floor Coating. If you wish to apply a clear finish, Rust-Oleum Seal Krete Clear Seal is recommended, as it is designed for use over latex and acrylic one-part floor paints. http://www.homedepot.com/p/Seal-Krete-1-gal-Clear-Seal-Gloss-Sealer-606001/203002730
Rust-Oleum Concrete Floor Paint can handle road salts as well as gas and oil. Best practice is to try to rinse or clean the floor periodically to assist with the longevity and performance of the coating.
Thanks for reaching out, Alma! Rust-Oleum Concrete Floor Paint can be used on the concrete, but we do recommend that you talk to the manufacturer of the glue to make sure their glue can stick to an acrylic coating. We recommend waiting for full cure before you would consider gluing the tile down. That's generally about 7 days.
Our Battleship Gray Concrete Floor Paint is an acrylic water-based coating, and is low-odor. When applied outdoors, odor and vapors from the coating are very minimal, however, if you are sensitive to paint fumes or odor, we recommend wearing a paint mask or respirator while applying the coating.
Hi Smf, Thank you for your recent inquiry with The Home Depot. This Concrete Floor Paint can be returned within 90 days with a receipt if unused. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
You've come to the right place! In order to properly prepare the floor for Rust-Oleum Concrete and Garage Floor Coating, we recommend wire brushing any of the areas that are down to bare concrete. We also suggest lightly sanding the entire surface with a 60 grit sandpaper to ensure proper adhesion of our paint over the previously coated surface. You'll also want to clean the surface with a degreaser such as dish soap and water and make sure the surface is dry before coating over it. We hope this helps!
Happy to help! For the best results, we recommend allowing new concrete cure for a minimum of 28 days before coating with Rust-Oleum Concrete Floor Paint.
Rust-Oleum EpoxyShield Concrete Floor Paint is recommended for use over bare concrete or masonry surfaces or over previously coated floors that are in good, sound condition. For the best results, we recommend removing the mastic to ensure proper adhesion. Rust-Oleum Krud Kutter Adhesive Remover is great for removing most glues and adhesives, carpet seam sealer, and mastic! http://www.homedepot.com/s/krud%2520kutter%2520adhesive%2520remover?NCNI-5