Hello, The Edison Nickel sink is about 6.5 inches deep. Thanks!
Hello, We recommend using a 7'' or 8 " faucet. The Pfister faucet model# LF-048-COKK will be a good one. Thanks!
We recommend using a neutral cure silicone caulk when installing this sink, it's just recommended but not required.
No it doesn't. We bought the recommended sink stopper. It works great and we love it
No, this sink would be too small for your dimensions
This could work as a drop-in with your dimensions, but it would be close. The outer most dimensions of the sink are 18.5"x15.5" inches and the rim is 1" inch wide so you would have a good half inch of overlap on the depth, but about a tenth of an inch overlap on the width. Each sink is hand hammered so there can sometimes be variations in the dimensions up to 1/4" inch, but Home Depot and Sinkology do have a great return policy if the sink doesn't work out.
NOTHING other than the sink. It's a standard size hole at the bottom.
The sink is really shiny so brushed nickel faucets don't match. We had to get chrome.
YES......the flat rim indicates the under-mount capability. I have a total of 4 ALL of which are under-mounted.