#1 Home Improvement Retailer

Internet #204403038

Model #4281020400406

Store SKU #1000021768

#8 x 1-1/2 in. T-Star Plus Drive Washer/Wafer Head Partial Thread Yellow Zinc Coated Cabinet Screw (175-Box)

  • No Pre-Drilling in Wood
  • Heat Treated (Grade-5) for strength and durability
  • German-engineered threads drive the screw faster without damage
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Check out our Threads!! Our patented thread serration technology allows the screw to be driven faster, easier to install, and reduces splitting in wood. Let the SPAX FACTOR take some of the hassle out of your next project.
  • No required pre-drilling in wood. Be more efficient on the job by eliminating time consuming steps with self drilling SPAX UNIQUE 4CUT POINT technology.
  • T-Star plus drive provides superior bit engagement. Better bit engagement means quicker installation with less effort. Welcome to the world of one-hand overhead driving.
  • This low profile washer head design is ideal for the installation of cabinetry. Enjoy excellent clamping force with high pull through resistance to streamline your next project.
  • Stay Stronger for Longer! Heat Treated Grade 5 Durability. Subjecting the screw to heat treating gives greater strength and reduces breakage. Tested under the tougest scenerios to give you confidence in every connection.
  • Wafer Head Construction screws provide excellent draw down and holding performance in multiple materials where a flush or countersunk installation is not possible or desired.
  • This carbon steel screw coated in yellow zinc is your ideal fastener for your interior needs.
  • Bit Included
  • Bit Included

Compare Similar Cabinet Screws

current product
#8 x 1-1/2 in. T-Star Plus Drive Washer/Wafer Head Partial Thread Yellow Zinc Coated Cabinet Screw (175-Box)
#8 x 1-1/2 in. T-Star Plus Drive Flat-Head Partial Thread Yellow Zinc Coated Multi-Material Screw (197 per Box)#8 x 1-1/2 in. Philips Square Drive Flat-Head Full Thread Yellow Zinc Coated Multi-Material Screw (197/Box)Top Rated#8 x 2 in. Philips Square Drive Flat-Head Full Thread Yellow Zinc Coated Multi-Material Screw (161 per Box)
BrandSPAXSPAXSPAXSPAX
Name#8 x 1-1/2 in. T-Star Plus Drive Washer/Wafer Head Partial Thread Yellow Zinc Coated Cabinet Screw (175-Box)#8 x 1-1/2 in. T-Star Plus Drive Flat-Head Partial Thread Yellow Zinc Coated Multi-Material Screw (197 per Box)#8 x 1-1/2 in. Philips Square Drive Flat-Head Full Thread Yellow Zinc Coated Multi-Material Screw (197/Box)#8 x 2 in. Philips Square Drive Flat-Head Full Thread Yellow Zinc Coated Multi-Material Screw (161 per Box)
Price
Ratings
(78)
(226)
(86)
(93)
Screw Length1-1/2 in1-1/2 in1-1/2 in2 in
Size#8#8#8#8
FeaturesCoated,Self Drilling,Self Tapping,Serrated EdgesCoated,Self Drilling,Self Tapping,Serrated EdgesSelf Drilling,Self TappingCoated,Self Drilling,Self Tapping
Interior/ExteriorInteriorInteriorInteriorInterior
Package Quantity175197197161
Product Weight (lb.)1.00.0050811
Head StyleWafer HeadFlat HeadFlat HeadFlat Undercut
Thread Pitch.094.094.094.094
Drive StyleT-Star PlusT-Star PlusPhillips-SquarePhillips-Square
View ProductView ProductView ProductView Product

Specifications

Dimensions

Screw Length
1-1/2 in
Thread Pitch
.094

Details

Color Family
Gold
Drive Style
T-Star Plus
Fastener Plating
Zinc & Yellow
Fastener Type
Cabinet Screws
Fastener/Connector Material
Steel
Features
Coated,Self Drilling,Self Tapping,Serrated Edges
Finish
Yellow Zinc
Head Style
Wafer Head
Included
Driver Bit,Screw
Interior/Exterior
Interior
Measurement Standard
SAE
Package Quantity
175
Product Weight (lb.)
1.00
Returnable
90-Day
Size
#8

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call the Customer Service Center at 1-800-435-4654.

Questions & Answers

4Questions12Answers

Are these good for pocket holes?

Asked by JV March 26, 2020
2
Answers

You are better off buying the specific Pocket Screws from Kreg, but these might work. I've never used them. For joining 3/4" material the typical pocket screw is only 1 1/4" long.

What is the head height?

Asked by forradalom March 5, 2019
4
Answers

I would say the head doesn't protrude more than 1/16 of an inch, (no more than 1/8) & prob less than that, though note, I was using on soft pine so the screw did counter sink some. .

What is the diameter of the head please?

Asked by John February 21, 2019
2
Answers

Just measured mine using a digital caliper for you, 3/8 inch\ 0.36 inch or 9.3 mm

Does anyone know if these are available in 5 lbs. boxes, or more?

Asked by nashvillecarpenter October 31, 2018
4
Answers

@John. Thanks, but that's not the same screw.

Customer Reviews

  • 4.6
    out of 78 reviews
  • 95% recommend this product
Filter by:
Showing 1-10 of 78 reviews
Good
Pros: Bit included Cons: Different sizes mixed. Almost of them were shorter than 1-1/2".
by Jin
Really good product I use it instead of kreg screws cheaper and awesome.
Really good product I use it instead of kreg screws cheaper and awesome.
by Eddie
NOT made in China. Period!
NOT made in China. Period!
by Browncoat
Fantastic holding power. East to start. Always great to get...
Fantastic holding power. East to start. Always great to get a new driver tip. While not made in the USA, they are certified as Made in Germany - NOT more China junk.
by DojoPapa
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Excellent quality and good pricing not made in China but...
Excellent quality and good pricing not made in China but made in the USA. Thank God.
by DIY
I've used these screws on many home projects and they never fail me. I've used different sizes t...
I've used these screws on many home projects and they never fail me. I've used different sizes to build all sorts of things including large crates to ship taxidermy. They're simply the best and the bit never slips. I used the #8 x 1-1/2 in. screws to hang the brackets for Home Depot brand blinds and they were far superior to the supplied screws. I'm a SPAX fan for life!
by SPAX
The screws are easy to drive with the torx.
The screws are easy to drive with the torx.
by Jake
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
These screws are strong, wont snap under load and best...
These screws are strong, wont snap under load and best of all, I can use these screws in my Kreg pocket hole bores instead of the Kreg screws. These screws are half the cost of the kreg screws and just as good.
by DrDovetail
Showing 1-10 of 78 reviews