Internet #206133176

Model # UC607LFA10

Store SO SKU #1001395228

0697285030183

SharkBite

1/2 in. PEX Barb x Male Copper Sweat Brass Adapter Fitting (10-Pack)

  • Compatible with PEX Pipe
  • Compatible with stainless steel clamp & Copper Crimp ring systems
  • Lead free DZR brass construction
$ 17 17
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Compatible with PEX Pipe
  • Compatible with stainless steel clamp & Copper Crimp ring systems
  • Lead free DZR brass construction
The SharkBite PEX Barb x Male Copper Sweat Adapter (10-Pack) is an easy to install, low cost solution to transition from Copper Pipe to PEX Pipe. SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.
  • Lead free DZR brass construction for durability and reliability
  • Low-cost plumbing connection system
  • Barb x male sweat connection
  • Compatible with PEX pipe
  • NSF listed
  • Meets UPC, IPC and cUPC requirements
  • Fittings work with copper crimp ring or stainless steel clamp connection methods
  • Rated to 200°F and 200 psi
  • 10-piece pack
  • California residents see Prop 65 WARNINGS

Product Overview

  • Compatible with PEX Pipe
  • Compatible with stainless steel clamp & Copper Crimp ring systems
  • Lead free DZR brass construction
Model #: UC607LFA10
Internet #: 206133176

The SharkBite PEX Barb x Male Copper Sweat Adapter (10-Pack) is an easy to install, low cost solution to transition from Copper Pipe to PEX Pipe. SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.

  • Lead free DZR brass construction for durability and reliability
  • Low-cost plumbing connection system
  • Barb x male sweat connection
  • Compatible with PEX pipe
  • NSF listed
  • Meets UPC, IPC and cUPC requirements
  • Fittings work with copper crimp ring or stainless steel clamp connection methods
  • Rated to 200°F and 200 psi
  • 10-piece pack
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand SharkBite SharkBite SharkBite SharkBite
Name 1/2 in. PEX Barb x Male Copper Sweat Brass Adapter Fitting 1/2 in. PEX Barb x 3/4 in. MIP Brass Adapter Fitting 1/2 in. PEX Barb x MIP Brass 90-Degree Elbow Fitting 1/2 in. PEX Barb x Male Copper Sweat Brass Adapter Fitting (10-Pack)
Price
$2.65
$2.78
$4.17
$17.17
Ratings (2) (1) (0) (15)
View Product View Product View Product View Product

Specifications

Dimensions

Double Fitting Size
1/2" x 1/2"
Fitting 1 size
1/2"
Fitting 2 size
1/2"
Product Depth (in.)
1.30
Product Height (in.)
0.625
Product Length (in.)
1.30
Product Width (in.)
0.625

Details

Application
Potable Water
Compatible Pipe Material
Multi-Purpose
Fitting or Connector Type
Adapter
Fitting/ Connector Collection
PEX
Material
Brass
Maximum working pressure (psi)
200
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
0.0466lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242

Specifications

Dimensions

Double Fitting Size
1/2" x 1/2"
Fitting 1 size
1/2"
Fitting 2 size
1/2"
Product Depth (in.)
1.30
Product Height (in.)
0.625
Product Length (in.)
1.30
Product Width (in.)
0.625

Details

Application
Potable Water
Compatible Pipe Material
Multi-Purpose
Fitting or Connector Type
Adapter
Fitting/ Connector Collection
PEX
Material
Brass
Maximum working pressure (psi)
200
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
0.0466lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242

Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 21ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

1/2 in. PEX Barb x Male Copper Sweat Brass Adapter Fitting (10-Pack) is rated 5.0 out of 5 by 15.
Rated 5 out of 5 by from This sweat adapter is available in both male and female, they seal the joints to prevent leakage when transitioning from copper piping to plastic piping. Like out tankless water heater we switched from the 40 gallon water heater of old. Our house is primarily plastic, so this was a needed item to haqve on hand for the plumber. We used female on one side and male on the other.
Date published: 2018-12-12
Rated 5 out of 5 by from These SharkBite Pex fittings are used to transition from conventional ½’ rigid copper line to Pex. This particular size (½x ½”) male sweat are fitted inside ½” street elbows, slip couplings, stop couplings or tee fittings then soldered in place. Pex tubing is then slid over the barb and either crimped in place with a copper pex crimp ring or a pex clamp. By following standard sweat guidelines and methods, these fittings solder well. Clean material and flux prove they accept solder properly and show over 98% solder penetration throughout the full joint.
Date published: 2018-11-09
Rated 5 out of 5 by from The SharkBite 1/2 in. brass PEX barb x male copper sweat adapters are much more economical to pur... The SharkBite 1/2 in. brass PEX barb x male copper sweat adapters are much more economical to purchase in larger quantities like this 10 pack. It’s a convenient size for a smaller job. I have found I like the SharkBite products and have never had a problem with any failures of these fittings. When you factor in the total cost of PEX pipe and fittings compared to copper pipe and fittings plus the larger labor cost of copper I will usually always use PEX .
Date published: 2018-12-05
Rated 5 out of 5 by from Shark Bite 1/2 X 1/2 M sweat fittings is a good addition to the plumbers kit. I have to say it took me a minute to warm up to PEX but after seeing it has been utilized in Europe for a number of years I have been convinced it's a better substitute to CPVC. I have utilized Shark Bite push to fit fittings for a number of repairs with no problem, which made me choose these sweat fittings. These fittings are great when roughing in showers that recommend Copper water connections and when repairing breaks in copper runs. You can utilize both types of clamps the copper press rings or the stainless steel clamps
Date published: 2018-12-04
Rated 5 out of 5 by from These are a convenient and inexpensive way to convert from sweat plumbing to PEX. I had a few wa... These are a convenient and inexpensive way to convert from sweat plumbing to PEX. I had a few water lines I wanted to convert to PEX but didn't want to spend the money to by SharkBite compression fittings to do it. All that was necessary was to sweat one of these on a coupling or elbow and then crimp on PEX. Simple, fast and inexpensive. They come in packs of 10 so I have enough left over should I need to convert later. They are well made and durable. Excellent value.
Date published: 2018-12-09
Rated 5 out of 5 by from Really love these adapters. I used to just use copper for everything and have since switch to pe... Really love these adapters. I used to just use copper for everything and have since switch to pex. These adapters makes the process so easy and they come in a zip lock bag that keeps them from going all over the place if you only use one or two at a time. I have never had an issue with sweating them on or anything like that. They simply work just as they should. Totally recommend if you are planning on making the switch.
Date published: 2018-12-09
Rated 5 out of 5 by from For large jobs these can not be beat. Once you have sprung for the PEX cinch tool the stainless ... For large jobs these can not be beat. Once you have sprung for the PEX cinch tool the stainless steel clamp system are much better priced than the Sharkbite couplings. I redid a 1940s cabin plumbing and had to work in crawl space under the building which was very tight by todays standards. The flexibility of PEX really helped as did the greatly reduced number of soldering joints laying on my back.
Date published: 2018-12-09
Rated 5 out of 5 by from These are a solid brass design and are perfectly sized for sweating to copper. They work exactly ... These are a solid brass design and are perfectly sized for sweating to copper. They work exactly as intended and are a great way to convert from copper to PEX. They are good for a service plumber that is making changes to a current plumbing system and modifying to PEX. I don't know how much new construction could benefit from the 1/2" size, but these would be great in 3/4" for that purpose.
Date published: 2018-12-14
  • y_2019, m_7, d_17, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_, sid_206133176, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 8ms
  • REVIEWS, PRODUCT