$217
- Removes SharkBite Push to Connect fittings from pipe
- Reusable on multiple same size quick connect fittings
- Disassembly is fast and easy using the disconnect clip
- View More Details
How to Get It
Frequently Bought Together
Price:
$217
Product Overview
Make a mistake; No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-to-Connect fittings connect copper, PEX and CPVC in any combinations and the Disconnect Clip makes it easy to take the connection apart when needed.
- Light weight, durable plastic construction
- 1 disconnect clip works for multiple SharkBite push-fit fittings of the same size
- Available in 5 sizes (3/8 in., 1/4 in., 1/2 in., 3/4 in. and 1 in.)
- Makes disassembly and reuse a snap
- Shop all SharkBite Fittings
- Shop the SharkBite Polyethylene Pipe Collection
Compare Similar Disconnect Clips
|  |  | | |
| Brand | SharkBite | Tectite | Tectite | SharkBite |
| Name | 1 in. Push-to-Connect Disconnect Clip | 1 in. Demount Clip | 1/2 in. Demount Clip | 3/4 in. Push-to-Connect Disconnect Clip |
| Price | $217 | $217 | $217 | $224 |
| Ratings | (15) | (2) | (2) | (77) |
| Material | Plastic | Plastic | Plastic | Plastic |
| Pipe or Fitting Product Type | Accessory | Accessory | Accessory | Fittings & Connectors |
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Maximum compatible pipe size (in.)
1
Product Depth (in.)
0.378
Product Height (in.)
1.68
Product Length (in.)
2
Product Width (in.)
1.324
Details
Accessory Type
Collar
Compatible Pipe Material
Multi-Purpose
Connectivity
Push to Connect
Fitting/ Connector Collection
Specialty
Material
Plastic
Maximum working pressure (psi)
5
Minimum compatible pipe size (in.)
1
Pack Size
1
Pipe or Fitting Product Type
Accessory
Product Weight (lb.)
0.012
Returnable
90-Day
Warranty / Certifications
Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.
Questions & Answers
Typical questions asked about products:
- Is the product durable?
- Is the product easy to use?
- What are the dimensions of the product?
Customer Reviews
Nov 26, 2016
Waste of Time and Money
I was almost sold on Sharkbite, until I was forced to "undo" a fitting, using the disconnect clips. The in store demonstration of the removal process was nothing like my personal experience. In real life, I found myself in a cold and muddy 26" crawl space cutting the fitting off, like I've done, for the last two decades, except at four times the cost.
by
Response from Technical SupportNov 28, 2016
Good morning,
We are sorry to hear about the issues you experience when trying to remove our products. Our main design for SharkBite is to stay on the pipe. Removing them can be difficult. The difficulty can only increase as you install them in difficult locations.
If you are using SharkBite products often, you could look at getting disconnect tongs. These could allow you better grip and easier removal.
Customer review from sharkbite.comJan 12, 2022
a necessary tool, must have if you are using the...
a necessary tool, must have if you are using the sharbite.
by
Dec 3, 2021
Disconnect clip is a joke
Have bought Sharkbite couplings before and installed them as directed. N
Haven't had a need to remove any until today. Bought two today to replace a shutoff valve and couple a water supply line to a hot water heater. Because i=of another soldered joint leaking with all the pipe movement I had to uncouple the valve from the 3/4 inch copper pipe. I worked at it for over 30 minutes then enlisted my son in law (a licensed building contractor) who took another 7 minutes to finally remove it.
The orange horseshow shaped tool is worthless! Next time I need such a repair I'll either make certain there can be NO removal needed in my lifetime or go Old School and solder the joint/valve. Wished I had spent the $8 for the tong removal tool.
by
Customer review from sharkbite.comJul 17, 2021
Works great. Much much better than alternative brands. ...
Works great. Much much better than alternative brands. Stick with Shark Bite!!!!!
by
Mar 19, 2021
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Mar 8, 2020
Complete fail
I’ve used these and also the special plier tool. Neither of them is very effective. Best option is to use appropriately-sized crescent wrench. Just fit the wrench to the pipe or tubing, then slide against the sharkbite fitting, and pull it off. Works best for me.
by
Customer review from sharkbite.comDec 4, 2019
5 Star Review
Rating provided by a verified purchaser
by
Mar 7, 2019
poor product...
poor product
by
Response from SharkBite SupportApr 12, 2019
Hi Tracy, we are sorry to hear about your less than satisfactory experience with the 1 in. SharkBite Disconnect Clip. We’d be happy to learn more about your specific application to ensure you’re 100% satisfied with the Disconnect Clip. Please feel free to give our Customer Service Team a call at 1-877-700-4242 so we can assist!
Jan 1, 2019
Works great...
Works great
by
Dec 2, 2018
Quick installation, impossible to remove
I thought this was the most wonderful product until it was time to remove the SharkBite fitting. "Easy" disconnect couldn't be further from the truth. I've been wrestling with this for the last hour and it hasn't budged. I am following the instructions as well so this has nothing to do with operator error.
by
Customer review from sharkbite.com
Related Products
Explore More on homedepot.com
Appliances
Kitchen
Lighting
Outdoor Garden
Tools
