Model # UC256LFA10

Internet #206133173

Store SO SKU #1001395225

SharkBite 3/4 in. Brass PEX 90-Degree Barb Elbow (10-Pack)
0697285030121

SharkBite

3/4 in. Brass PEX 90-Degree Barb Elbow (10-Pack)

  • Lead free DZR brass construction
  • Compatible with stainless steel clamp & Copper Crimp ring systems
  • Compatible with PEX Pipe
$ 17 14 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Lead free DZR brass construction
  • Compatible with stainless steel clamp & Copper Crimp ring systems
  • Compatible with PEX Pipe
The SharkBite PEX Barb Elbow (10-Pack) is an easy to install, low cost solution to connect PEX Pipe. SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.
  • Lead free DZR brass construction for durability and reliability
  • Low-cost plumbing connection system
  • Barb x barb connection
  • Compatible with PEX pipe
  • NSF listed
  • Meets UPC, IPC and cUPC requirements
  • Fittings work with copper crimp ring or stainless steel clamp connection methods
  • Rated to 200°F and 200 psi
  • California residents see Prop 65 WARNINGS

Product Overview

  • Lead free DZR brass construction
  • Compatible with stainless steel clamp & Copper Crimp ring systems
  • Compatible with PEX Pipe
Model #: UC256LFA10
Internet #: 206133173

The SharkBite PEX Barb Elbow (10-Pack) is an easy to install, low cost solution to connect PEX Pipe. SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.

  • Lead free DZR brass construction for durability and reliability
  • Low-cost plumbing connection system
  • Barb x barb connection
  • Compatible with PEX pipe
  • NSF listed
  • Meets UPC, IPC and cUPC requirements
  • Fittings work with copper crimp ring or stainless steel clamp connection methods
  • Rated to 200°F and 200 psi
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$10.96 /each
$17.14 /each
$19.50 /each
$23.34 /each
Name 1/2 in. Brass PEX 90-Degree Barb Elbow (10-Pack) 3/4 in. Brass PEX 90-Degree Barb Elbow (10-Pack) 1/2 in. Brass PEX Barb x Female Copper Sweat Adapter (10-Pack) 3/4 in. Brass PEX Barb Tee (10-Pack)
Brand SharkBite SharkBite SharkBite SharkBite
Ratings (11) (12) (13) (14)
Fitting or Connector Type Elbow Elbow Adapter or Coupling Tee or Wye
Fitting 1 size 1/2" 3/4" 1/2" 3/4"
Connection Barb x Barb Barb x Barb Barb Barb x Barb x Barb
Material Brass Brass Brass Brass
View Product View Product View Product View Product

Specifications

Dimensions

Fitting 1 size
3/4"
Fitting 2 size
3/4"
Product Depth (in.)
1.428
Product Height (in.)
1.428
Product Length (in.)
1.428
Product Width (in.)
0.67

Details

Compatible Pipe Material
PEX
Connection
Barb x Barb
Fitting or Connector Type
Elbow
Fitting/ Connector Collection
PEX
Material
Brass
Maximum working pressure (psi)
200
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
0.0860lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242

Specifications

Dimensions

Fitting 1 size
3/4"
Fitting 2 size
3/4"
Product Depth (in.)
1.428
Product Height (in.)
1.428
Product Length (in.)
1.428
Product Width (in.)
0.67

Details

Compatible Pipe Material
PEX
Connection
Barb x Barb
Fitting or Connector Type
Elbow
Fitting/ Connector Collection
PEX
Material
Brass
Maximum working pressure (psi)
200
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
0.0860lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242

Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

3/4 in. Brass PEX 90-Degree Barb Elbow (10-Pack) is rated 5.0 out of 5 by 12.
Rated 5 out of 5 by from These Shark PEX fittings are the best available. They are made from high quality materials and h... These Shark PEX fittings are the best available. They are made from high quality materials and have an appearance that is flawless, very finished looking. Installation is a breeze using PEX tubing and clamps. There are no bad surfaces showing on the sealing ends and I expect they will seal very well and last indefinitely on any piping system in your residence.
Date published: 2018-11-06
Rated 5 out of 5 by from Everything one would expect from a reputable manufacturer; quality and reliability from the produ... Everything one would expect from a reputable manufacturer; quality and reliability from the products they sell. When it comes to plumbing supplies I do not use anything except SharkBite products. On the limited number of occasions that I have, I have been reminded as to why I simply do not trust anything except SharkBite. Solid brass construction; barbs that are consistent throughout each one and across packaging means reliability.
Date published: 2018-10-29
Rated 5 out of 5 by from The Shark Bite Plumbing Solutions by Apollo 3/4 inch PEX fittings are made from high quality brass and will last as long as your house will. They are cast and machined inside and out to high tolerance so you will have smooth running water and when installing them they will work every time. Apollo supplies many different stiles of fitting for all your fitting needs. I hope this helps with your decision. Good luck with all your projects.
Date published: 2018-10-20
Rated 5 out of 5 by from 3/4 inch Plex brass barb elbow’s fit pvc water pipe perfect and easy. This is a ten count bad. Th... 3/4 inch Plex brass barb elbow’s fit pvc water pipe perfect and easy. This is a ten count bad. The Plex fittings are well made and are easily inserted into all brands of 3/4 inch pvc water pipe. Made of brass these will last a very long time and are safe to use in a water supply system. These pex fittings are well made easy to use and will last a long time.
Date published: 2018-10-19
Rated 5 out of 5 by from Works flawlessly. Have used the Push-to-Connect fittings before. Just invested in the crimp rin... Works flawlessly. Have used the Push-to-Connect fittings before. Just invested in the crimp ring fittings. Very happy!
Date published: 2018-09-04
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2018-01-11
Rated 5 out of 5 by from As described, just what was needed... As described, just what was needed
Date published: 2017-12-05
Rated 5 out of 5 by from PEX is great! PEX is the best kind of plumbing for homeowners. Working with crimp fittings and flexible plastic tubing is much easier than soldering copper with a torch. It's also easier than gluing together PVC pipe. The attached picture shows a job I did myself with PEX. I wanted to replace the control manifold in a 50-year-old radiant heating system. The valves on the old manifold were all frozen, and it was risky even touching them. The was no way to balance the system, or properly flush it. The problem is that the new manifold is much larger than the old one, and worse - opposite-hand. The plumber refused to even return my call when I asked about this, so I decided to do it myself. The first step was to get some copper fittings, watch a few videos on YouTube, and teach myself how to sweat pipe joints. It's really not difficult. Then I cut off all the old copper, and sweated PEX adapters onto each end. Each of the 3/8" ends required a separate adapter for the PEX adapter, which made 10 joints all together. Once that was done, I put away the torch, and did the rest with the crimper. I recommend the pinch-ring style of crimper, as it only requires access to the front of the pipe, not all the way around it. The pinch rings are more expensive than the plain rings, but there is no way I could have done this otherwise. The crimp tool is expensive, but once you have it, you have it forever. PEX tubing is flexible, but not flexible enough for this job, you can see all the elbows I used in order to make the new manifold fit in the same space, with the valves facing forward, even though, as I said, it is opposite-hand. There are something like 3 dozen crimp joints here. If I had to do all that in copper with a torch, it would have been a nightmare, but with PEX it was easy. There were no leaks, and after three years it is still bone-dry. Once I got the system re-filled, I closed all the valves and flushed each loop one-by-one. The gunk that came out was incredible - 50 years' worth. After that, the heating system worked much better - every zone. This project didn't work out too well for my plumber though - he is now 'fired' - if I can do this, I can do anything. PEX is great! I've always found SharkBite parts to be top quality.
Date published: 2016-05-20
  • y_2018, m_12, d_13, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_206133173, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • REVIEWS, PRODUCT