#1 Home Improvement Retailer

Internet #202032892

Model #UC955A

Store SKU #851792

3/4 in. PEX Barb Stainless Steel Clamp (10-Pack)

  • Compatible with Brass or Plastic PEX Barb Fittings and PEX Pipe
  • Corrosion resistant stainless for reliability and longevity
  • Multi Pack provides convenience for the PRO
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

The SharkBite barb connection system is the best option for connecting PEX tubing when lower material cost is desired. Designed to repair pipes, clamps are compatible with 3/4 in. PEX piping. Robustly designed with Stainless Steel, the SharkBite clamp rings are corrosion resistant. And with a wide range of fittings, manifolds, regulator, thermostatic and ball valves available, the SharkBite barb connection system is perfect for your next plumbing project.
  • Stainless steel
  • Time saving clamp rings and tool offer reduced equipment cost, 1 tool clamps all sizes
  • Necessity to check each fitting ring with a go/no-go gauge is eliminated with a properly calibrated tool
  • Available in 3/8 in., 1/2 in., 3/4 in. and 1 in. sizes
  • 1-tool need to crimp all sizes
  • Go/no-go gauge required (sold separately)
  • 10-piece pack
  • Shop all SharkBite Fittings
  • Shop the SharkBite Polyethylene Pipe Collection
  • Find additional savings at your local PRO Desk with the Buying Guide

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Pipe Collars

3/4 in. Stainless Steel Oetiker Pex Cinch Clamps Kit - (10-Pack)
current product
3/4 in. PEX Barb Stainless Steel Clamp (10-Pack)
3/4 in. Stainless Steel PEX Barb Pro Pinch Clamp (10-Pack)Top Rated1/2 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack)
BrandThe Plumber's ChoiceSharkBiteApolloApollo
Name3/4 in. Stainless Steel Oetiker Pex Cinch Clamps Kit - (10-Pack)3/4 in. PEX Barb Stainless Steel Clamp (10-Pack)3/4 in. Stainless Steel PEX Barb Pro Pinch Clamp (10-Pack)1/2 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack)
Price
Ratings
(8)
(336)
(53)
(194)
View ProductView ProductView ProductView Product

Specifications

Dimensions

Compatible Pipe Size (in.)
0.75
Product Depth (in.)
1.113
Product Height (in.)
0.356
Product Width (in.)
1.038

Details

Accessory Type
Collar
Compatible Pipe Material
PEX
Material
Steel
Number in Package
10
Pack Size
10
Pipe or Fitting Product Type
Accessory
Product Weight (lb.)
0.015
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

Questions & Answers

18Questions32Answers

are these clamp use on pex A or pex B tubing?

Asked by ben December 29, 2020
3
Answers

I always use them on B for potable water. red blue or white.

Clamp/crimp tool won’t fit behind shower tile wall. Are there alternatives? Working in a few inches of space.

Asked by AmandaDenaburg October 15, 2020
3
Answers

Not that I know of. The stainless steel clamps require a lot of force to set them properly and that is why the handles of the installation tool are so long.

Can you apply the Pex Steel clamps with pliers or do I need the plex clamp tool?

Asked by JB2 January 7, 2020
6
Answers

You need to use the proper tool for a leak free seal.

I’m redoing my entire plumbing in my house. What is the coldest and hottest temperatures PEX tubing rated for?

Asked by keno August 27, 2019
3
Answers

Depending on the pipe and manufacturer, those spec will be on the "specs" section of the description when you look at the item. That's the best way to know for sure.

What size clamp should be used for 3/4 lawn irrigation tubing? Thanks

Asked by Doc July 14, 2019
1
Answer

Hello, SharkBite clamp rings are only approved for use with PEX tubing. We do not recommend the use of these rings with any other tubing type. If you have additional questions please feel free to contact our technical support department at 877-700-4242. Best Regards,

Can 1/2" clamps be used on 3/8" pex?

Asked by Peter May 7, 2019
5
Answers

No, The clamp diameter needs to match the diameter of the PEX tubing

Is this clamp consider a cinch type clamp?

Asked by John June 28, 2018
5
Answers

It is a pinch clamp, not a cinch clamp.

Does this style of PEX clamp come larger quantities?

Asked by moose February 1, 2018
2
Answers

It is available in certain stores in larger quantities or you can order it at HomeDepot.com. If you have further questions, please contact Customer Service M-F, 8am -5pm at (877) 700-4242.

Can regular hose (screw type) clamps be used to secure PEX pipe to fitting connections? (link to...

Asked by Omar December 9, 2017
3
Answers

Please DO NOT use this clamp on PEX tubing. It is not rated for what you need. Please purchase a PEX clamp(s), which is installed with a crimping tool for proper sealing of the clamp to the fitting. If you are not familiar with this type of job, please hire a tradesman..

Are these clamps rated for direct burial water lines?

Asked by Jeffb August 19, 2017
1
Answer

Yes, SharkBite PEX pipe is approved to AWWA C904 which covers PEX pipe in regards to burial. Be sure to check with local, city or state codes to see if the pipe needs to have sleeves or any type of protective burial for your area. PEX pipe can be used as a service line based on its corrosion resistance to soil and water, its long life, and its oxidative resistance.PEX pipe can be installed under a concrete slab. Since PEX pipe is supplied in coils, installation can be completed in one continuous length without the need for extra fittings. PEX pipe can also be encased within a slab, which is commonly used for radiant floor heating. In cases where PEX pipe penetrates a concrete slab, it must be protected with a nonmetallic sleeve at the penetration point. If you still need to use a fitting and clamp connection, fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion. As with any plumbing project, consult with local plumbing codes for specific applications. SharkBite fittings meet all UPC, IPC and cUPC requirements. If you have further questions, please contact Customer Service M-F, 8am-5pm at (877) 700-4242.

3/4 in. PEX Barb Stainless Steel Clamp (10-Pack) - page 2

Customer Reviews

  • 4.8
    out of 336 reviews
  • 95% recommend this product
Filter by:
Showing 1-10 of 336 reviews
I have experienced 2 ea failed crimp rings out of...
I have experienced 2 ea failed crimp rings out of a two 10pcs purchase packages leading, to switch to a different type.. The crimp separated after the Ryobi P660 tool was used to crimp closed, the tool has built in gap crimp gauge.. The shark bites do not other the information on the packaging to determine what the crimp gap should be , like the Ryobi 660 only has two calibration setting ...
by Pex
Response from RWC SupportMar 1, 2021
Hello, we are sorry to hear about the difficulty you experienced with the SharkBite Stainless Steel Clamp Rings. Please reach out to our Customer Service Team at 1-877-700-424 so we can assist and improve your experience. SharkBiteCashAcme
1 person found this helpful
The pex clamp work great. Never had a problem with breaking.
The pex clamp work great. Never had a problem with breaking.
by Ej
I could connect 40 in a row, and pull my Boat, TIGHT fasteners!!!!
DIY'er. Did >400 connections making my Homemade PEX Manifolds, and doing Room Fixtures,and outside Spigots. NO......REPEAT.......NO leakage at any spot or Fixtures since 2014. "They say - You won't have any problems if ya fastened them right". Agree, to some degree. I say it's a 80/20 in favor of a well made Product.......just saying. Ripped out all Galvy/Copper Piping. A GR8 Crimping Tool I have also. Get a good one(Tool) and it should last your Lifetime, (fasteners get all the blame when something goes wrong). >400 connections, scraped 25, learning process . Used the 1/2' ones also. Bummer bag has only 10. Initially started with 4 boxes from a Supply Web. . Some 1/4" fastened, need 2/16" closer - refer back to learning process comment. Bought 100' roll of 3/4" PEX in Order also. Happy Crimping.
by DIYcauseIcant
3 people found this helpful
by HomeDepotCustomer
They worked great with absoulty no leaks even with movement...
They worked great with absoulty no leaks even with movement or realignment.
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
My daughter's class C motorhome had a plumbing problem when the nipple of the plastic diverter va...
My daughter's class C motorhome had a plumbing problem when the nipple of the plastic diverter valve on the water heater broke off. She got a new brass valve to replace the plastic one that came in her coach, and I purchased the stainless steel clamp removal tool as well as the pinch pliers to install these stainless steel clamps on the new brass diverter valve. These clamps hold the PEX tubing very securely to the fittings on the new valve. It took a couple of installations to get used to using the new pinch pliers on these clamps, but after doing several of them I developed a feel for just how much force it took to install these 1/2 inch clamps onto the new valve. This is a very robust system and the installed stainless steel clamps should last for a long time and keep the RV plumbing from leaking. I will use them again in the future when I have RV plumbing problems as now I not only have spares of these clamps on hand, but I also now have the clamp removal tool and the proper pinch pliers to install them.
by Rocketman53
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Product works as it should, but those prices are ridiculous....
Product works as it should, but those prices are ridiculous. Should be 500 for $50
by HomeDepotCustomer
Showing 1-10 of 336 reviews