The 3/4 in. SharkBite x 1 in. FIP x 24 in. SharkBite Water Softener Connector allows you to easily connect your Water Supply lines to your Water Softener Unit. After applying pipe thread tape to the MIP nipples on your water Softener, thread the FIP end of the Water Softener connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX or CPVC pipes and your Water Softener is connected. The braided stainless-steel connector is also available in Corrugated Stainless Steel. SharkBite Water Softener Connectors will decrease the amount of time and effort needed to install a Water Softener in your home and are the fastest way to complete your project.
2-piece pro pack
Use to connect water softener to any combination of copper, PEX or CPVC pipe
Innovative push-fit design makes for quick and easy installation
Push-fit connections require no solder, glue or unions
Decreases the amount of time and effort needed to connect water heater to pipe
Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
Corrosion resistant to improve longevity
Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
Meets all UPC, IPC, and cUPC requirements
3/4 in. pipe insertion depth = 1-1/8 in.
Lead free DZR brass fittings, braided stainless steel hose
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
3/4 in. Push-to-Connect x 1 in. FIP x 24 in. Braided Stainless Steel Water Softener Connector (2-Pack)
Product Depth (in.)
Product Height (in.)
Product Width (in.)
For Use With
Electric Tank,Electric Tankless,Gas Tank,Gas Tankless
Stainless Steel - DZR Brass
Number in Package
Product Weight (lb.)
Vent Part Type
Flexible Connector Vent
Warranty / Certifications
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242
Questions & Answers
Typical questions asked about products:
Is the product durable?
Is the product easy to use?
What are the dimensions of the product?
out of 8 reviews
100% recommend this product
Showing 1-8 of 8 reviews
Jan 25, 2021
I've used these fittings before and never had an issue with them. The push to connect works well ...
I've used these fittings before and never had an issue with them. The push to connect works well as long as the end is properly sanded and smooth. The threaded end is durable and makes connection easy. The rubber o ring also does a good job of sealing to make a tight connection. One thing to note is that if you intend to disconnect the push to connect end you will need the release tool do so.
Years ago I didn't really trust these because they seemed to easy to install which must mean they...
Years ago I didn't really trust these because they seemed to easy to install which must mean they don't last well but I think after all these years they've kind of proven themselves. Our water softener is a little older but we needed to replace a connector. It was so easy to do. I did cut one copper pipe, deburr it then just snapped it on. I did use teflon tape for the other side and tightened with a wrench. This was probably a 10-15 minute job at most
These are great for anything water line related. Very easy to use quick fast and done
May 5, 2021
Easy to install, easy to adjust. I have done alot of sweated copper and nothing is more frustrati...
Easy to install, easy to adjust. I have done alot of sweated copper and nothing is more frustrating than getting all piping together then finding a joint leaks. Sharkbite may cost a bit more but in the long run can save time and frustration, especially on smaller jobs.
Gave this a 4 star just because it would have been nice to have an extra 4 inches on each piece but that is specific to the job I had at hand.
Mar 5, 2021
Feb 17, 2021
Very simple to plumb in my new water softener without...
Very simple to plumb in my new water softener without the hassles of old plumbing shut off valves.
Feb 17, 2021
Really impressed with this product. Exactly what I needed...
Really impressed with this product. Exactly what I needed to replace connections to a hard piped water softener. Saved having to use a handful of fittings/adapters and was attached in minutes. Only complaint was that I wasn’t sure exactly how deep I needed to insert the copper pipe which I read is critical to make a tight seal. I could not push it in as far as their website said but not leaks to date.