#1 Home Improvement Retailer

Internet # 206356301

Model # 24985A

Store SKU # 1001977375

Product Images

3/4 in. Push-to-Connect x 3/4 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee

$32.15
Apply Now
Pay $7.15 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Fastest way to connect stop valve to PEX, copper, CPVC stubouts
  • Full-port brass ball with quarter-turn shut-off
  • Requires no special tools to install on hot or cold stubouts
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

Highlights

  • Works on wet lines, rotatable after installation, and removable
  • Push-to-connect fittings are ideal for installation in tight spaces
  • Rated to 160 degrees Fahrenheit and 125 PSI
  • Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
  • Chrome-plated exterior body
  • Low-lead DZR corrosion-resistant brass body
  • Code approved, IAPMO listed, for details see Specifications
  • 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
  • Corrosion resistant to improve longevity
  • Listed by IAPMO and designed and certified to ASSE 1061, ASME A112.18.1/CSA B125.1, NSF/ANSI 61 and NSF/ANSI 372 product standards
  • Meets all UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • 3/4 in. Pipe insertion depth = 1-1/8 in.
  • Shop SharkBite for all you Supply plumbing needs
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 206356301

Model # 24985A

Store SKU # 1001977375

Specifications

Dimensions

Inlet Diameter (In.)

3/4

Outlet Diameter (In.)

3/8

Product Length (in.)

2.355 in

Details

Application

Potable Water

Color/Finish

Stainless

Compatible Pipe Material

Multi-Purpose

Compatible Product

Humidifier, Ice Maker, Refridgerator

Connection

PTC x Comp

Features

Removable

Indoor/Outdoor

Indoor

Material

Brass

Maximum Pressure (PSI)

125 PSI

Maximum Working Temperature (F)

160

Pack Size

1

Returnable

90-Day

Valve Configuration

Straight

Warranty / Certifications

Manufacturer Warranty

For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

Questions & Answers

Can anyone tell me if this Tee Valve comes in 3/4in X 3/4 in X1/4 in ?
ByFeb 20, 2024
1 Answer | 
Answer This Question

Hi, Thank you for contacting SharkBite. The Tee Stop does come in the size you are requesting. I've attached a link to the product which list the part number. If you have any more questions you can call tech support at 877-700-4242. (https://www.sharkbite.com/us/en/brass-push-to-connect/valves/supply-stops/tee-stop) Kind regards,

By|Feb 21, 2024


    need 3 ways 1/4x1/4 one 1/4 in female
    ByApr 21, 2023
    1 Answer | 
    Answer This Question

    Hi, The SharkBite 3/4 in. Push-to-Connect x 3/4 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee does not come in the size you are requesting. If you will call tech support at 877-700-4242 we would be happy to recommend a possible solution for your application. (Kind regards,)

    By|Apr 24, 2023


      I have a 3/4 inch to 3/4 inch push to connection coupling in line, the length of it is 4 and 1/2 inches. May I replace the coupling with this 3/4 inch to 3/4 inch to 1/4 inch compression fitting, which the length is 3 some inches long. Thanks.
      ByJan 1, 2023
      1 Answer | 
      Answer This Question

      Hi, The SharkBite 3/4 in. Push-to-Connect x 3/4 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee can be installed in place of the 3/4" tee you currently have installed. You will need a 3/4" coupling and additional pipe to make the connection. If you would like help choosing the correct parts or you have any more questions about the installation you can call tech support at 877-700-4242. (Kind regards,)

      By|Jan 5, 2023


        Will this valve work on polybutylene supply pipe?
        ByDec 20, 2022
        1 Answer | 
        Answer This Question

        Hi, The SharkBite 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 3/8 in. Compression Chrome-Plated Brass Service Stop Tee will not work with polybutylene pipe. We do make a polybutylene transition coupling that will connect to the polybutylene pipe. I have attached a link to the coupling. If you have any more questions you can call tech support at 877-700-4242. (https://www.homedepot.com/p/SharkBite-3-4-in-Push-to-Connect-Brass-Polybutylene-Conversion-Coupling-Fitting-U4016LFA/202270633) (Kind regards,)

        By|Dec 22, 2022


          Does it matter what orientation/direction it is installed in? There appears to be an arrow on the side of the body.
          ByDec 11, 2022
          1 Answer | 
          Answer This Question

          The SharkBite 3/4 in. Push-to-Connect x 3/4 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee is not flow specific. Water will flow in either direction and it can be mounted vertical or horizontal. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)

          By|May 4, 2023

            (1)

            How much of the line do I have to remove to maintain the same overall length with this installed?
            ByDec 11, 2022
            1 Answer | 
            Answer This Question

            Hi, you will need to remove 0.35" or about 1/3" of pipe to install the SharkBite 3/4 in. Push-to-Connect x 3/4 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee and maintain the same overall length. I've attached a link to the spec sheet which covers dimensions of the product. If you have any more questions you can call tech support at 877-700-4242. (https://www.sharkbite.com/sites/default/files/files/SharkBite-Tee-Stop-Spec-Sheet_04-2020.pdf) (Kind regards,)

            By|May 4, 2023

              (1)

              Can I use this for a 1/2? copper waterline to T off for a fridge 1/4? copper waterline for the ice maker? Thanks.
              ByJan 29, 2022
              4 Answers | 
              Answer This Question

              Yes

              By|Apr 2, 2024

                (1)

                Yes, it will work great for you, I put one of these on my cold water supply to 1/4 ice maker and I have great water to supply my ice maker and filtered water from refrigerator door 

                By|Mar 14, 2023

                  (1)

                  Hi, The SharkBite 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee can be used on copper pipe that has an (ASTM B88) rating. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)

                  By|Mar 14, 2023

                    (1)

                    Yes, I used the 'T' for my ice maker.

                    By|Dec 15, 2023

                      (1)

                      What is the purpose of the small copper “donut ball” inside the 1/4 threaded connection?
                      ByAug 28, 2021
                      2 Answers | 
                      Answer This Question

                      to connect to Ice maker lines or other water lines that are 1/4"

                      By|Oct 26, 2021

                        Hi, The (small copper donut ball) is commonly referred to as the ferrule. It is used for joining two pipes together and other materials such as wires, fibers, or posts. As the ferrule(s) moves axially into the fitting body, the body's angled shape radially compresses the end of the ferrule onto the outer diameter of the tubing. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)

                        By|Aug 31, 2021


                          Viewing 1-8 of 39

                          Customer Reviews

                          4.8 out of 5

                          • 4.8 out of 64 reviews
                          • 95% recommend this product
                          Filter by:
                          Showing 1-10 of 64 reviews
                          The BEST product EVER, easy and quick to install...I turned the water main off, cut the pipe in t...
                          The BEST product EVER, easy and quick to install...I turned the water main off, cut the pipe in two places and bam done no tools no Nothing..... it was so easy! so quick ! it took longer for the water to drain from the pipe than installing the valve...what a cool product.....
                          by
                          • Verified Purchase
                          • Recommended
                          1 found this review helpful
                          Had a HVAC company install a humidifier in 2013 and they cheapened out and used a saddle valve fo...
                          Had a HVAC company install a humidifier in 2013 and they cheapened out and used a saddle valve for the water line. Two and a half years into the install, the saddle valve failed. I called a plumber out and he said $200 for a new saddle valve or $600 to install a new fitting with a 1/4" compression valve on it. I decided to try and fix it myself. I watched the sharkbite videos and for $65 in parts (copper pipe cutter, sharkbite valve, sharkbite deburr tool, sharkbite disconnect clip and copper pipe to practice on), I fixed it myself in just about 30 minutes (to include clean-up). Sharkbite fittings are one of the best plumbing inventions in a long time and thanks to HD for carrying the product.
                          by
                            • Recommended
                            6 found this review helpful
                            Easy to install after the fact, works great.
                            i replaced an old saddle valve for my ice maker line. the last homeowner conviently tapped in the the 3/4" line and not a 1/2" line so i had to special order this. feels good to have some peace of mind and be able to shut off the water line. was easy to install. cut the old pipe. slide on and it lock in place. then you can even rotate it to get the shut off where you want it. love the flexibility.
                            by
                            • DIY
                            • Verified Purchase
                            • Recommended
                            1 found this review helpful
                            Best valve for new fridge ice maker
                            Our new Maytag fridge required a higher water flow than the kits that "tap" the copper pipe could provide. This SharkBite valve solved the problem and was fairly easy to install. The closest supply line was 3/4" copper pipe so the 1/2" SharkBite ice maker install kit would not work. If you need to tap a 3/4" copper supply line for your refrigerator, this is the way to go.
                            by
                            • DIY
                            • Recommended
                            5 found this review helpful
                            Easy install with little fuss. SharkBite meets all my needs for a quick humidifier waterline….
                            by
                            • Verified Purchase
                            This customer chose to rate the product and not provide text.
                            by
                            • Verified Purchase
                            Exactly what we needed to connect ice maker/ water line to refrigerator.
                            by
                            • Verified Purchase
                            Amazingly simple to install. Works perfectly.
                            by
                            • Verified Purchase
                            Great product. Easy install, smooth operation.
                            by
                            • Verified Purchase
                            Simple and easy to install any tubing.
                            by
                              Showing 1-10 of 64 reviews