$2667
Pay $1.67 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Easiest way to install a new or replacement shut-off ball valve
- Requires no special tools to install on hot or cold-water lines
- Works on wet lines, rotatable after installation, and removable
- View More Details
Product Details
Specifications
Questions & Answers
2Questions
Q:Can this valve be used where the 1/2" side is the incoming water and the 3/4" is the output side?
by|Jun 1, 2022
3 Answers
Q:What is the country of origin for these valves? (Where are they made?)
by|May 29, 2019
2 Answers
Showing 1-2 of 2
Dec 13, 2019
This is a well constructed Reducing Ball Valve, it's 1" x 3/4", lead free, made of copper with a ...
This is a well constructed Reducing Ball Valve, it's 1" x 3/4", lead free, made of copper with a vinyl covered handle which makes it easy to turn open or closed. It's rated 200PSI.
No tools required, it's compatible with more than 5 types of pipes; PEX, HDPE, PE-RT, CPVC and copper. Easy and fast to install. Be sure to read about it on HomeDepot.Com!
We highly recommend this Reducing Ball Valve, you won't regret having it!
by
Dec 2, 2019
I had a valve soldered in place with copper piping that needed to be replaced under my kitchen sink counter that was stuck and could not be operated. It is a very tight area with dishwasher, refrigerator supply, and sink connections so I used a SharkBite 3/4 to ½ reducing ball valve that simply needs to be pushed together to connect. It can be rotated to position the lever so that it has room to be operated. Such an easy product to use to save time and energy. I could not imagine having to sweat together copper in such tight quarters with a torch. This valve works with copper, CPVC and PE-RT pipe. Downstream of the pipe I used CPVC to replace the copper. The valve is a little pricey but well worth the price. Everything used to manufacture the valve is high quality and a ball valve has a full pipe size opening which won’t restrict water flow. It is rated at 200 degrees F and 200 PSI. I impressed with this product and highly recommend it as I saved at least one hour on this project. Please look at the pictures and look at the tools required to replace this vale by soldering one in place verses the SharkBite.
by
Nov 28, 2019
The Sharkbite 1 inch x 3/4 inch push-to-connect reducing ball valve is easy to use and made very ...
The Sharkbite 1 inch x 3/4 inch push-to-connect reducing ball valve is easy to use and made very well. The sharkbite technology is great for plumbing connections. It works on any combination of Copper, PE-RT, CPVC, PEX Pipe. Push-it connections need no solder, glue, unions, or tools. Its the easiest way to install a new or replacement shut-off ball valve when transitioning from 1 in. pipe down to 3/4 in. Rated to use on 200°F and 200 psi.
by
Nov 24, 2019
The quick-connect design beats gluing CPVC, soldering copper or making a mechanical PEX connectio...
The quick-connect design beats gluing CPVC, soldering copper or making a mechanical PEX connection easily. The reducing feature worked great for sliding onto a previously installed ¾-inch CPVC stub-outs for an outdoor shower to make the ½-inch runs to the shower control. The valve will function as a service shut-off and a Winter shut-off so I can drain the shower runs. In my case, I would prefer that the valve did not rotate to make turning the handle easier without the valve rotating on the pipe. Adding mounting ears to the valve would solve this issue--just a thought.
The valves come with pre-installed plastic inserts for use with PEX tubing. These inserts are not needed for CPVC or copper but do not have to be removed. However, I like to remove them especially on copper where I believe that they will cause turbulence and pressure drop. I found a helpful document on the HD website that addresses using these fittings, and how to remove the PEX insert on page 5.
https://www.homedepot.com/hdus/en_US/DTCCOM/HomePage/Know_How/Plumbing/SharkBite/Docs/SB_Installation_Instruc7.pdf
The orange PVC dipped handle is easy to grip. However, I would prefer that it be red (for hot water) and that SharkBite either offer the same valve with a blue handle (for cold water) or offer a blue vinyl replacement handle cover that could be changed-out in the field. I could not locate a country of origin on the valve or tag but the SharkBite catalog states that their products are made in the USA.
by
Nov 24, 2019
Another perfect and easy to use sharkbite connector. I used this connector along the water supply...
Another perfect and easy to use sharkbite connector. I used this connector along the water supply route I made connecting some older 1/2 inch copper to a larger 3/4 pex that eventually feeds the water heater. I tested the shutoff and it worked perfectly. Of course the actual installation of this sharkbite connector was a snap. (Cut and debur the existing copper, push the sharkbite very firmly to set the teeth, and push the pex firmly on the other side.) Done 5 minutes at most if the space had been easier to access.
by
Nov 10, 2019
This 1 inch X 3/4 inch sharkbite push to connect reducing ball valve is a must have for the aver...
This 1 inch X 3/4 inch sharkbite push to connect reducing ball valve is a must have for the average do-it-yourself home plumber. It is so nice to install these sharkbite valves. I will never mess around with soldering pipes again! push to connect onto exiting pipe with no leaks. plastic separating tool sold separately to remove valve if needed. Definitely worth the money!
by
Nov 6, 2019
Sharkbite has been manufacturing plumbing systems and components for residential and commercial a...
Sharkbite has been manufacturing plumbing systems and components for residential and commercial application for over 20 years. The connections made with Sharkbite fittings are permanent and are rated to be buried in the ground and inside walls. This 1” x 3/4” lead-free brass ball valve is beautifully machined and manufactured. As with all push-to-fit Sharkbite products, installation couldn’t be easier or guaranteed leak free, provided that they are installed according to Sharkbite’s installation instructions. Simply make sure the pipe is cut square, de-burr if needed, and pushed fully into the fitting. Sharkbite allows this fitting to be removed and reused up to 4 times. The manufacturer backs this valve with a 25 year warranty BUT ONLY IF INSTALLED BY A LICENSED PLUMBER! Therefore, there is no warranty if installed by a non-licensed person, ie homeowner. This valve can be used with copper, CPVC, PE-RT and PEX pipes. It is rated for 200 psi @ 200 F and can be use for both potable and hydronic applications. It is made in USA.
by
Oct 24, 2019
I am making a automatic fill line for my swimming pool. I need to lower the water pressure a bit ...
I am making a automatic fill line for my swimming pool. I need to lower the water pressure a bit and the SharkBite 1 in. x 3/4 in. Push-to-Connect Reducing Ball Valve is the perfect answer. Being SharkBite I know it is high quality, easy to install, and won't leak. I will just flip it around and instead of reducing I will be expanding diameter and reducing pressure.
by
Sep 11, 2019
I've been a big fan of Sharkbite fittings and valves for many years. This 3/4 inch by 1/2 inch pu...
I've been a big fan of Sharkbite fittings and valves for many years. This 3/4 inch by 1/2 inch push-to-connect reducing ball valve is going into a new outdoor project we're building: an outdoor shower in our patio area. This valve will work prefectly for reducing from the 3/4 inch PEX line that I'll run through the fence with a 3/4 inch female hose adapter down to the 1/2 inch PEX line I will run to the shower head.
Like all Shrakbite brass fittings, this is well made and sturdy, so should hold up well to the outdoor conditions of the patio. The really neat thing about Sharkbite fittings is that they can be turned around the pipe as needed to orient the valve handle where you need it after it has been attached to the pipe. You can also easily remove and re-use Sharkbite fittings with a simple tool.
by
Sep 9, 2019
As a DIY home owner I have used most of the connection types for copper lines in my house. I have...
As a DIY home owner I have used most of the connection types for copper lines in my house. I have soldered, used compression fittings and even shark bites occasionally.
The reason I selected this product is because of how fast you can install these fittings, and how reliable they can be. In fact I trust them so much that I keep a bunch of spares on hand at all times. If anything ever breaks, springs a leak, or something goes terrible wrong I can cut out an old fitting and just use of of these to put it all back together.
Great fitting. Ball valve has a smooth operation with a firm stop. Will definitely purchase again if I need to.
by
Frequently Bought Together
Price:
$2667
Compare Similar Ball Valves
 | |  |  | |
| Brand | JONES STEPHENS | SharkBite | SharkBite | The Plumber's Choice |
| Name | PlumBite 1/2 in. Push On Brass Ball Valve | 3/4 in. x 1/2 in. Push-to-Connect Reducing Ball Valve | 3/4 in. Push-to-Connect PVC IPS x 3/4 in. CTS Brass Ball Valve | 1/2 in. Full Port pushfit Ball Valve Water Shut Off Push to Connect PEX Copper CPVC Brass (2-Pack) |
| Price | $1636 | $2667 | $2797 | $3579 |
| Ratings | (0) | (113) | (57) | (7) |
| Connection | PTC | PTC | PTC | PTC |
| Valve Inlet Diameter (in.) | 1/2 | 3/4 | 3/4 | 1/2 |
| Valve Outlet Diameter (in.) | 0.50 | .5 | 0.75 | 0.5 |
| Inlet Diameter (In.) | 1/2 | 3/4 | 3/4 | 1/2 |
| Valve Use | Water | Water | Water | Water |
| Outlet Diameter (In.) | 1/2 | 1/2 | 3/4 | 1/2 |
| Application | Potable Water | Potable Water | Hydroponics,Potable Water | Hydroponics,Potable Water |
| Compatible Pipe Material | Multi-Purpose | Multi-Purpose | Multi-Purpose | Multi-Purpose |
| Material | Brass | Brass | Brass | Brass |
| View Product | View Product | View Product | View Product |
Related Products
Explore More on homedepot.com
Appliances
Flooring
Furniture
Kitchen
Lighting
