#1 Home Improvement Retailer

Internet #315110809

Model #K23036A

Store SKU #1005884753

EvoPEX 1/2 in. Push-to-Connect x 3/8 in. Compression Quarter Turn Angle Stop Valve

$7.32
  • High performance polymer - chemical and chloramine resistance
  • No tools, no calibration, no rings for error proof installation
  • Approved for behind-the-wall applications with no access panels
Store
0 in stock
Text to Me
caret

Product Details

The SharkBite EvoPEX System is the first PEX only push-to-connect rough-in plumbing solution designed to use without the need for additional tools and rings. It is engineered to improve efficiency and enable plumbing contractors to optimize install time with clean, leak-free installations unlike traditional crimp and expansion methods. Like traditional SharkBite Fittings, no special tools, soldering, glue or crimping to plumb an entire home, optimizing install time and efficiency. The systems ease of installation reduces the risk of install errors and potential leaks, just push onto PEX Pipe and check the green visual indicator to ensure a proper, leak-free connection. It's that simple. SharkBite EvoPEX Fittings are made from Acudel Plastic it provides toughness and chemical resistance along with excellent anti-decay stability and dimensional stability.
  • High performance polymer with great chemical and chloramine resistance
  • No tools, no calibration, no rings for error proof installation
  • Peace of mind you can see with visual indicator for assurance of proper fitting connection
  • Easy install with minimal learning curve for new laborers
  • No potential for leaks caused by nicks on the fitting exterior
  • Maximum temperature: 200°F/maximum pressure: 160 psi
  • Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61 / meets all UPC, IPC and cUPC requirements
  • No demount clip required, SharkBite EvoPEX fittings are not meant to be removed once installed
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

DIY Projects & Ideas

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?
caret

Customer Reviews

5 out of 5
(5)
  • 5
    out of 5 reviews
  • 100%recommend this product
Filter by:
Showing 1-5 of 5 reviews
Shark bite rules!
The shark bite compression valves are the best in general. It’s so easy to work with the shark bite Couplers, adapters and valves. This particular valve is an angle valve that has a quarter turn stop. Simple to use, simple to install, effective once installed. Shark bite products continue to do great things and be easy for anyone to install. Using Pex tubing and shark bite products has made plumbing a bit simpler
by
  • Recommended
Super easy
Just finished replacing all 13 shut-off valves on all basins, sinks and toilets in our house (all old and failing and soldered on hard-copper piping). Couldn't imagine how much a plumber would charge to solder new valves in, so I figured I'd try one SharkBite valve myself - I have DIY experience with plumbing, so why not give it a try? I was blown away by the ease of installation - follow the instructions carefully (watch some of SharkBite's installation videos) and you should have no problems with it. I did the first, was extremely pleased with the results, and tackled the other 12. So far, so good. Not a single drop (leak) from any of them, and the fitting between each valve and the copper pipe seems to be very tight. A bonus - the valve will rotate 360 degrees on the end of the pipe, so you can aim it any direction you want. It may not be necessary, I used #1 steel wool to clean each pipe before valve installation. SharkBite tells you to clean before installation, but does not say to use steel wool or what
by
  • Recommended
Great Replacement Valve for PEX tubing
The Sharkbite EvoPEX 1/2 in. Push-to-Connect 3/8 in. compression quarter turn angle stop was exactly what I needed to replace the contractor installed plastic valve with attached hose. I replaced the pedestal sink in the half bath with a quarter round sink that had a new faucet which utilized the 3/8 compression connection. Easy on - needed to hold PEX with pliers at the wall.
by
  • Recommended
Love the Sharkbite fittings
I like using most of the Sharkbite fittings. This fitting is no exception. It is super easy to install, requiring almost no prep. It works only with PEX type plumbing. All you need to work with this type of fitting is a clean pipe that’s the appropriate size. The 90 degree shut-off is my favorite type of valve. They are simpler to close and open for maintenance and seem not to leak as often from the stem as other screw type valves. This valve is appropriate when a pipe comes out of the wall. I recommend this ½” pipe to ⅜” compression angle valve.
by
  • Recommended
1 found this review helpful
Another Great Shark
I cant say enough about this line of products. I have used in many different configurations and with copper and pex. These are solid metal and well made connectors. Keep in mind this is a one-time use and should not be reused later. I am very impressed with the quality and ease of use. Follow directions and ensure the proper pressure ratings are followed. You will be impressed by these!
by
Showing 1-5 of 5 reviews

Frequently Bought Together

+
+
Price:
$732

Compare Similar Shut-off Valves

current product
EvoPEX 1/2 in. Push-to-Connect x 3/8 in. Compression Quarter Turn Angle Stop Valve
EVOPEX 1/2 in. Push-to-Connect x 3/8 in. Compression Quarter Turn Angle Stop Valve1/2 in. Crimp PEX Barb Inlet x 3/8 in. Compression Outlet Angle Valve1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve
BrandSharkBiteSharkBiteBrassCraftBrassCraft
NameEvoPEX 1/2 in. Push-to-Connect x 3/8 in. Compression Quarter Turn Angle Stop ValveEVOPEX 1/2 in. Push-to-Connect x 3/8 in. Compression Quarter Turn Angle Stop Valve1/2 in. Crimp PEX Barb Inlet x 3/8 in. Compression Outlet Angle Valve1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve
Price
$698
$806
$945
Buy 20 or more $4.73
$1265
Ratings
(5)
(5)
(48)
(5)
ConnectionPTC x CompPTC x CompPEX Barb x CompPTC x PTC
MaterialChromeChromeBrassBrass
Inlet Diameter (In.)1/21/21/21/2
Outlet Diameter (In.)3/83/83/83/8
Compatible Pipe MaterialPEXPEXPEXMulti-Purpose
Maximum Working Temperature (F)160160140115
Valve Inlet Diameter (in.)1/21/21/21/2
Maximum Pressure (psi)160 PSI160 PSI125125
ApplicationPotable WaterPotable WaterPotable WaterPotable Water
View ProductView ProductView ProductView Product