#1 Home Improvement Retailer

Internet #206883924

Model #US2:QF260AP

Store SKU #404813

Store SO SKU #516939

60 Amp Double Pole Type QPF GFCI Circuit Breaker

  • Provides Class A GFCI protection
  • Device intended for personnel protection from Ground Faults
  • Meets all requirements set forth by NEC regarding GFCI protection
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Siemens GFCI circuit breakers are UL Listed and CSA Certified as Class A devices. These circuit breakers offer the new Self-Test and Lockout feature as required by UL 943, enabling the GFCI to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground fault.
  • Double-pole, 240-Volt, 60 Amp GFCI circuit breaker
  • 10kA interrupting rating
  • Includes self-test as required by UL 943 as an added safety feature
  • Suitable for a variety of construction applications including spas, hot tubs, kitchens, bathrooms, etc.
  • Resists false tripping (shielded to prevent RF interference)
  • Provides Class A GFCI protection
  • White line neutral (pigtail) must be connected to the panel neutral for the device to function
  • Learn More About Circuit Breakers Here in our Buying Guide.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Double Pole Breakers

current product
60 Amp Double Pole Type QPF GFCI Circuit Breaker
50 Amp Double Pole Type MP-GT2 GFCI Circuit Breaker50 Amp Double Pole Type QE Ground Fault Equipment Protection Circuit Breaker60 Amp Double Pole Type QE Ground Fault Equipment Protection Circuit Breaker
BrandSiemensMurraySiemensSiemens
Name60 Amp Double Pole Type QPF GFCI Circuit Breaker50 Amp Double Pole Type MP-GT2 GFCI Circuit Breaker50 Amp Double Pole Type QE Ground Fault Equipment Protection Circuit Breaker60 Amp Double Pole Type QE Ground Fault Equipment Protection Circuit Breaker
Price
Ratings
(52)
(20)
(1)
(1)
Interruption TypeGFCIGFCIGFCIGFCI
Breaker TypeDouble PoleDouble PoleDouble PoleDouble Pole
Pack Size1111
Maximum Amperage (amps)60505060
Power Distribution FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional Features
Voltage (volts)240240120/240120/240
Mounting TypePlug InPlug-OnBolt OnBolt On
Product Weight (lb.)11.111.071.07
Electrical Product TypeBreakerBreakerBreakerBreaker
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
7
Product Height (in.)
5
Product Width (in.)
2

Details

Breaker Type
Double Pole
Electrical Product Type
Breaker
Interruption Type
GFCI
Maximum Amperage (amps)
60
Mounting Type
Plug In
Number of Poles
2
Pack Size
1
Power Distribution Features
No Additional Features
Product Weight (lb.)
1
Returnable
90-Day
Voltage (volts)
240

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
1 Year

Questions & Answers

12Questions19Answers

Hi, is this compatible with Murray Type MP-GT breakers? I just want to confirm before I purchase...

Asked by Herschel October 15, 2020
2
Answers

Installed this into a Midwest Spa Panel: "4 Circuit, NEMA 3R By Midwest UG412RMW260"

Will this fit into a SQd Homeline panel

Asked by Rico October 6, 2020
1
Answer

UL approval, not only fit, is the issue. We cannot advise. Please contact Schneider Electric for guidance on approved breakers for your Square D panel.

Is this the breaker that replaces the Murray MP250GFA? Doesnt mixing brands in a load center viol...

Asked by SIrk98 August 25, 2020
1
Answer

Yes, it is. The UL letter authorizing Siemens-labeled breakers in place of their Murray equivalents has been placed in the community forum and should post within 24 hours.

QPF or QE breaker for subpanel?

Asked by Michael June 15, 2020
2
Answers

If you do not know the difference, i strongly suggest that you hire a cert. Electrician

Is this breaker compatible with an ITE panel?

Asked by Nick May 6, 2020
1
Answer

The existing panelboard label or wiring diagram would need to indicate that Siemens type QPF breakers are acceptable for use in the equipment.

It this compatible to replace a GE THQL2140GF1 2 Pole 40 Amp GFCI Plug-in Circuit Breaker THQL ...

Asked by Douglas April 22, 2019
2
Answers

It will fit most modern home breaker panels, though I'm not sure if it would fit a GE panel or not (proprietary fit issues with some GE panels). Sorry, been too long since I worked on a GE panel. To be sure, you could buy a basic single pole, 15 or 20 amp Siemens breaker over the counter (under $5). If that fits, then this should too.

Is this compatible with a box that otherwise uses Siemens type QP breakers?

Asked by Bruce September 2, 2018
4
Answers

It was for our Duck "Midwest" subpanel that had the QP breakers

Will this gfci breaker fit in a Midwest box?

Asked by Jason July 29, 2018
2
Answers

Siemens is not aware of any Siemens products that are UL approved for use in a Midwest "box". You should contact Midwest for a wiring diagram of their product which shows the UL approved branch breaker types that can be utilized.

Does this breaker supersede Siemens QPF ? Mine old breaker does not have a number "2" after th...

Asked by Bombo May 25, 2018
3
Answers

We have just received word that the 2 pole GFCI is still Type QPF so the UL letter does not apply at this time. Our apologies.

will this breaker fit a ge panel?

Asked by tt November 8, 2017
1
Answer

Siemens breakers are not UL approved for use in a GE load center just like GE breakers are not UL approved for use in a Siemens load center.

60 Amp Double Pole Type QPF GFCI Circuit Breaker - page 2

Customer Reviews

  • 4.5
    out of 52 reviews
  • 89% recommend this product
Filter by:
Showing 1-10 of 52 reviews
Electrical surge took out my original gfci but saved my hot tub.
Electrical surge took out my original gfci but saved my hot tub.
by buster
1 person found this helpful
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
The breaker failed after 30 days. I replaced with a different brand.
The breaker failed after 30 days. I replaced with a different brand.
by Mustang
Long lead time but part arrived as described....
Long lead time but part arrived as described.
by Jon
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Worked fine. I replaced the old breaker that was tripping...
Worked fine. I replaced the old breaker that was tripping every other week.
by PilotandHomeowner
Good product, reliable brand.
Good product, reliable brand.
by Wayno
Like other Siemens breakers I’ve purchased, this one did not...
Like other Siemens breakers I’ve purchased, this one did not fit my older ITE EQ Loadcenter.
by JIm
This product was perfect and fit into the slot....
This product was perfect and fit into the slot.
by Sid
Perfect for our 2 man hot tub
Perfect for our 2 man hot tub
by Kg
Showing 1-10 of 52 reviews