Model # SB12AKIT

Internet #205975329

SilveRboard 24 in. x 1 in. x 48 in. R5 Radiant Acoustic Insulation Kit - STC 19 (5-Piece)
0662030105102

SilveRboard

24 in. x 1 in. x 48 in. R5 Radiant Acoustic Insulation Kit - STC 19 (5-Piece)

  • Higher R-value per inch than standard flat-sheet rigid foam
  • Moisture/air barriers eliminate the need for house wrap
  • Suitable for walls, floors, roofs and ceilings, indoors and out
$ 29 58 /package
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Higher R-value per inch than standard flat-sheet rigid foam
  • Moisture/air barriers eliminate the need for house wrap
  • Suitable for walls, floors, roofs and ceilings, indoors and out
SilveRboard Rigid Foam Insulation is a high performance flat-sheet insulation material made from Expanded Polystyrene (EPS) which is coated with a layer of reflective film laminated on both sides. This highly effective combination of materials offers a higher R-value per inch compared to traditional flat-sheet rigid foam insulation, as well as provides built-in moisture and air barriers which eliminate the need for house wrap. SilveRboard Rigid Foam Insulation (EPS) offers builders a higher performance product which increases job-site efficiency and reduces labor costs.
  • SilveRboard acoustic reduces sounds transmission (STC 19) through interior walls and can be used in conjunction with fiberglass batt to meet or exceed most building code - sound numbers
  • SilveRboard acoustic rigid foam insulation (EPS) can be used for floor, wall and roof insulation for above and below grade - indoor and outdoor- ideal for insulating garage and shed doors
  • SilveRboard acoustic is ideal for walls, floors and ceilings, bathrooms/laundry rooms, theater and quiet rooms- providing low profile thermal and acoustic attenuation
  • Creates thermal envelope for maximum heat/cooling efficiency
  • Built-in waterproofing eliminates need for house wrap or additional vapor barriers
  • How much do you need? Let our calculator help:
    Insulation calculator button

Product Overview

  • Higher R-value per inch than standard flat-sheet rigid foam
  • Moisture/air barriers eliminate the need for house wrap
  • Suitable for walls, floors, roofs and ceilings, indoors and out
Model #: SB12AKIT
Internet #: 205975329

SilveRboard Rigid Foam Insulation is a high performance flat-sheet insulation material made from Expanded Polystyrene (EPS) which is coated with a layer of reflective film laminated on both sides. This highly effective combination of materials offers a higher R-value per inch compared to traditional flat-sheet rigid foam insulation, as well as provides built-in moisture and air barriers which eliminate the need for house wrap. SilveRboard Rigid Foam Insulation (EPS) offers builders a higher performance product which increases job-site efficiency and reduces labor costs.

  • SilveRboard acoustic reduces sounds transmission (STC 19) through interior walls and can be used in conjunction with fiberglass batt to meet or exceed most building code - sound numbers
  • SilveRboard acoustic rigid foam insulation (EPS) can be used for floor, wall and roof insulation for above and below grade - indoor and outdoor- ideal for insulating garage and shed doors
  • SilveRboard acoustic is ideal for walls, floors and ceilings, bathrooms/laundry rooms, theater and quiet rooms- providing low profile thermal and acoustic attenuation
  • Creates thermal envelope for maximum heat/cooling efficiency
  • Built-in waterproofing eliminates need for house wrap or additional vapor barriers
  • How much do you need? Let our calculator help:
    Insulation calculator button

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Coverage Area (sq. ft.)
40 ft²
Product Length (ft.)
4 ft
Product Thickness (in.)
1 in
Product Width (in.)
24 in

Details

Faced or Unfaced
Faced
Insulation Features
Formaldehyde Free,Vapor Retardant
Insulation Location
2x4 Walls,2x6 Walls,2x8 Walls,Attics,Basements,Ceilings,Exterior Sheathing,Garage,Metal Buildings,Re-Siding
Insulation R-Value
R5
Insulation Type
Foam Board Insulation
Interior/Exterior
Interior/Exterior
Product Weight (lb.)
1.5lb
Returnable
90-Day
Sheathing Type
Sound Barrier

Warranty / Certifications

Warranty Information
Amvic Inc. offers a limited 25 year warranty on all our SilveRboard products. We warrant to the Qualified Owner that our SilveRboard sheets (the Product) will be free from manufacturing defects.

Specifications

Dimensions

Coverage Area (sq. ft.)
40 ft²
Product Length (ft.)
4 ft
Product Thickness (in.)
1 in
Product Width (in.)
24 in

Details

Faced or Unfaced
Faced
Insulation Features
Formaldehyde Free,Vapor Retardant
Insulation Location
2x4 Walls,2x6 Walls,2x8 Walls,Attics,Basements,Ceilings,Exterior Sheathing,Garage,Metal Buildings,Re-Siding
Insulation R-Value
R5
Insulation Type
Foam Board Insulation
Interior/Exterior
Interior/Exterior
Product Weight (lb.)
1.5lb
Returnable
90-Day
Sheathing Type
Sound Barrier

Warranty / Certifications

Warranty Information
Amvic Inc. offers a limited 25 year warranty on all our SilveRboard products. We warrant to the Qualified Owner that our SilveRboard sheets (the Product) will be free from manufacturing defects.

Questions & Answers

What does the acoustic part mean

Asked by: Lostboy
Soundproofing. I can verify that from my own experience as I used them temporarily in my windows as insulation to get me through the long hot 120° summers in Vegas. It was an added bonus that I realized I could barely hear my neighbor's annoying barking dog. (I obviously wasn't the only one annoyed because our HOA finally issued a restriction on allowing dogs to bark uncontrollably.)
Answered by: St8kout
Date published: 2018-07-23

Hi, can this be glued to the concrete wall in the basement?

Hi, can this be glued to the concrete wall in the basement?
Asked by: Von
I was under the impression that there needs to be an air gap between the foam and exterior wall... Is this the case or only for when there is just siding?
Answered by: Deanna
Date published: 2018-02-15

Can this be used on knee wall and exposed on attic side? Also this be attached to the attic side of a door on this wall?

The attic can get hot as much as 150 F on hot summer day. There is a furnace in attic too but it’s about 5’ from the knee wall I plan to insulate.
Asked by: InsulationInfo
Yes- should be no issue - air temperature can be much higher than material surface temp . Should be no problem up to about 200 degrees.
Answered by: Silverboard Product Expert
Date published: 2018-09-12

Can this be used in place of drywall?

Building two bathrooms back to back. Hoping to reduce noise using this peoduct but can it be used instead of regular drywall or does it need to be used in conjunction with drywall? Thanks
Asked by: LV
No, it is insulation and lacks the strength to be a wall.
Answered by: KLE
Date published: 2018-07-04
  • y_2018, m_9, d_19, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_152
  • loc_, sid_205975329, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 100ms
  • QUESTIONS, PRODUCT

Customer Reviews

24 in. x 1 in. x 48 in. R5 Radiant Acoustic Insulation Kit - STC 19 (5-Piece) is rated 4.4 out of 5 by 75.
Rated 5 out of 5 by from I got these to insulate our garage doors. I'm a 59 year old woman and I was able to cut and place... I got these to insulate our garage doors. I'm a 59 year old woman and I was able to cut and place all the panels on one door in about 45 mins. Part of that time was just figuring a few things out. I used a large serrated knife no problem. I scored the top layer first then went back to cut deeper and then folded on the cut on the edge of a table. (Like you would if cutting glass) Then I just sliced down the seam to cut the other layer of foil. Very quick and easy. Measure twice and cut once. I cut ours quite snug and even though they will stay on their own we used liquid nails on the back of the panels where it makes contact with the door. We can definitely tell the difference in the temp in our garage, especially in the afternoon when the sun is beating down on the doors. The panels also make the doors quieter when in motion. Did both doors for $100 and I believe it's well worth it. I will include pics but don't judge?? We are preparing to move after the first if the year, so the garage is a disaster!!
Date published: 2018-07-17
Rated 5 out of 5 by from Easy install, quick clean razor cuts, immediate temperature reduction in... Easy install, quick clean razor cuts, immediate temperature reduction in my wine room.
Date published: 2018-09-04
Rated 5 out of 5 by from Exactly what I needed to cover windows in an rv. Exactly what I needed to cover windows in an rv.
Date published: 2018-09-05
Rated 5 out of 5 by from These boards are very easy to install, they're easy to cut, and they do a good job as a radiant b... These boards are very easy to install, they're easy to cut, and they do a good job as a radiant barrier. Just one layer of these on the hottest (SW-facing) wall of my metal shop has made a noticeable difference in helping keep the shop from getting as hot as it was. Hopefully they'll be back in stock soon online and I can do the rest of the building. The "Acoustic" aspect will likely be a bit more evident when the rest of the shop is done, but it does cut down on outside road noise on the one wall.
Date published: 2018-06-28
Rated 5 out of 5 by from This solved a freezing problem that I have struggled with for years. Our refrigerator is located... This solved a freezing problem that I have struggled with for years. Our refrigerator is located on a 2' cantilever and the water line freezes up during severe cold spells. I installed the SilveRboard on the underneath, horizontal, exterior section of the cantilever. I had to trim the width by 1" (easily done with a straight edge and a box cutter that can be extended far enough to easily cut through the full width) and taped it in place with a weather proof metallic tape (adding double stick tape to the top for extra measure) and then taped the seams. Ohio is two weeks into an arctic bomb cyclone and the water line is working fine!
Date published: 2018-01-08
Rated 5 out of 5 by from Vapor barrier and 1 inch Styrofoam all in one Cuts nice and good bond on the silver coating. Great stuff
Date published: 2018-08-17
Rated 4 out of 5 by from This product did cut the sound as advertised. This product did cut the sound as advertised.
Date published: 2018-08-07
Rated 4 out of 5 by from Clean and easy to work with. Clean and easy to work with.
Date published: 2018-07-03
  • y_2018, m_9, d_19, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_75
  • loc_, sid_205975329, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms
  • REVIEWS, PRODUCT