No. This version can only be purchased on line is my understanding. Plus, the on line version is less expensive.
The A35 is rated with either 8dx1 1/2" nails or the SD9112 structural connector screw. In some loading conditions the nail capacity is higher and in others the screw capacity is higher; please see our website for details. It would be up to the Designer/Engineer of Record to specify for the fastener based on the specific application and demand load to be resisted. Thank you!
Though it may be common practice, we can only support installations of our products as they were designed/rated. Altered installations would need to be evaluated/approved by the Engineer of Record. Thank you!
This product comes with one piece. There is no bulk discount for this item.
duck bill pliers
You make that bend with duck bill clamp pliers, or hammer. packaging is easy when not bent and each installation would be different . aLeft hand bend or right hand bend. adjust to what you need by bending them on site.
The A35 has the standard G90 galvanized finish which provides a low level of corrosion protection and can be used with limited treated woods in dry, interior applications. Please see the "Corrosion" section of our website for complete information and the recommended finish for your condition. The A35 is also available in Z-MAX (A35Z) which provides a medium level of protection and Stainless Steel (A35SS) which provides a high level of protection. Thank you!
It would be up to the Designer to specify the appropriate connector based on framing layout, demand loads, local building codes, etc., but the LSC Adjustable Stringer Connector is the connector we refer to for stringer connections. Thank you!
The A34 allowable loads depend on the wood species being used. If using Douglas Fir or Southern Pine, both the F1 and *F2 floor loads are 395 lbs. If using Spruce-Pine-Fir or Hem Fir, the F1 and *F2 loads are 340 lbs. *connectors are required on both sides to achieve F2 loads in both directions. Thank you!
The A35 does not have the Z-MAX (it has the standard G90 finish); please see the A35Z.